Auto Corporation of America | 1956-60 ACA Corona

Oskiinus · 5 July 2017 08:36

A muscle car that actually turns?
Nice

DeusExMackia · 5 July 2017 09:25

The style has carried over really well in EU4. Back looks really good now.

abg7 · 5 July 2017 15:48

If ever I needed proof that the Chevalier was worth remaking in the UE4 release, this is it. It looks even better than it did previously!

Dorifto_Dorito · 3 August 2017 13:31

Note: No longer canon

OAM Chevalier Gen 2

POSTAR750×600 678 KB

_{1982 OAM Chevalier Gen 2 Poster}

Backstory

The 1970’s weren’t a good time for OAM. The 70’s fuel crises and the rising Japanese automotive industry led to poor sales figures. This and the catastrophic failures of the OAM Cavalry and the RoadCruiser showed that the industry was changing. With a new CEO, Audie Whittingmore, OAM had to act fast to change their image and rebrand themselves to keep with the times.

While the 70’s were a commercial trainwreck for OAM, they was a silver lining. Two cars stood out from the rest as a success, the OAM Traveller and Apache. What the two cars had in common with each other was that both were small, both equipped with smaller displacement engines and both were very affordable and easy to maintain. Their success was vital to keeping OAM running and most importantly, was vital in influencing the upcoming designs.

Using those cars design philosophy as a base, a new design team from Japan, led by Yuuichi Tomeo and new technology such as computers and wind tunnel testing, the next generation OAM cars were set to be sleek, aerodynamic and most importantly, fuel efficient.

What would come from this were two cars, both released in 1981, the OAM Chevalier Gen 2 and the OAM Phoenix.

Generation 2 Chevalier

293760_20170803140722_11696×306 119 KB

_{1981 OAM Chevalier Gen 2 V8 in Laguna Green}

Unlike the previous generation, the new “Gen 2” as it was known, was more of a family oriented car. While it retained key elements such as the independent rear double wishbone suspension, the Gen 2 was more sedate, designed with daily use in mind. However, this did not detract from the car’s capability of being sporty. While the 5L V8 was replaced with a 3.5L i6 in the standard model, the more sporty trims retained the V8 in the form of the 3.9L UAC Small Block, found in the Apache. This combined with the new aerodynamic styling and new electronic fuel injection, the Gen 2 was much faster and more manoeuvrable than its predecessor, whilst being larger and heavier.

Gen 2 Chevalier GTi

293760_20170803141153_11870×312 123 KB

_{1985 OAM Chevalier Gen 2 GTi in Midnight Blue}

In 1985, much like the Phoenix, the Gen 2 Chevalier received its a facelift in the form of the GTi series. The chassis was overhauled by ex-Erin engineers who were initial hired to improve the performance of the Phoenix, and were eventually hired by OAM to help design new cars.

First modification made to the Chevalier was the introduction of the new OAM designed “EG170DAT” i6 engine. The all aluminium construction, 4 valve DOHC turbocharged engine was originally developed to be fitted to the Phoenix GTi, was also fitted to the new 1985 Gen 2 GTi. This improved fuel economy and made the Gen 2 GTi as fast as the 1981 Gen 2 ‘Indiana’ with the 3.9L V8.
The next modification came in the form of remolding and redesigning the exterior to be more aerodynamically efficient. With new, more sophisticated computing and wind tunnel testing, the GTi was 20cm shorter and had much better aerodynamic efficiency compared to the 1981 models.

293760_20170803141237_11722×466 212 KB
293760_20170803141204_11738×478 250 KB

_{Comparison between 1981 Chevalier Gen 2 (Top) and 1985 Chevalier Gen 2 GTi (Bottom)}

Stats

1981 Standard Model

Price: $17,680 (@ 30% Markup)

293760_20170803143629_11672×222 99.3 KB

293760_20170803144239_11682×222 125 KB
293760_20170803143730_11670×230 146 KB

1981 “Indiana V8” Sport Model

Price: $19,370 (@ 30% Markup)

293760_20170803144841_11680×218 97.1 KB
293760_20170803144844_11688×224 129 KB
293760_20170803144847_11674×232 146 KB

1981 “Monte Carlo” Premium Model

Price: $22,490 (@ 30% Markup)

293760_20170803145052_11681×231 112 KB
293760_20170803145100_11673×232 130 KB
293760_20170803145104_11671×222 138 KB

1985 Standard GTi

Price: $19,890 (@ 30% Markup)

293760_20170803143615_11675×218 97 KB

293760_20170803144221_11672×228 121 KB
293760_20170803143743_11677×224 139 KB

1985 “OverDrive” GTi

Price: $22,490 (@ 30% Markup)

293760_20170803145521_11667×221 103 KB
293760_20170803145525_11677×220 121 KB
293760_20170803145530_11673×225 142 KB

Dorifto_Dorito · 20 September 2017 21:38

Well since UE4 is now more playable, Ive decided to completely overhaul OAM lore to the point that anything before this post (except the OP) is no longer canon.

bastormonger · 30 September 2017 11:18

Very nice car - the coolest thing about it is the movie poster, though.

abg7 · 30 September 2017 12:56

The Chevalier now looks a lot better… I reckon it would be a real rival to the Maine Imperator on looks alone!

Dorifto_Dorito · 5 October 2017 00:57

Dorifto_Dorito · 5 November 2017 20:54

Note: No longer canon

Several quick Photoshops later…

1938 ACA Corona

ScreenShot00019EE1280×657 725 KB

Brief History

Before we get to the car, here’s a brief history lesson on ACA, the Auto Corporation of America.

Founded in 1932 following the Great Depression, ACA was formed from the remnants of three companies, the Lansing Motor Company, Montpelier Luxury Motor Works and Barnhart Tractor Company, all of which filed for bankruptcy during the start of the Great Depression in 1929.

Initially ACA struggled to gain much traction in the market, being beaten by the other major US manufacturers. However, their first majorly successful design would come in 1938. This would be the ACA Corona.

The Car

Originally based of old sketches found in files in the Lansing Motor Company, the Corona was a full-size luxury car made by ACA. The lead designer was John Emery, who previously worked for Montpelier Motor Works and designed some of their best looking cars. With this expertise behind him, Emery completely redesigned the old sketches forming the iconic design of the 1938 ACA Corona.

Underneath the bonnet, was a large block 440CI Short Angle V8. This produced a maximum of 200hp, which was more than enough to move the car in a straight line. Mated to a three speed manual gearbox with a column shifter, the car could reach 0-60 in about 10 seconds, making it the perfect car for mobsters and get away drivers, something the car was notable for.

The interior was plush and filled with places to store wine and cigars. Some models were even fitted with a phonograph. To top it all off, the price for this car was only $18,450 or about $272,683.27 in today’s money.