Home | Wiki | Discord | Dev Stream | YouTube | Archived Forums | Contact

Automation + BeamNG: First Impression Car Reviews


#99

That Bechov Landspeed Car is so dangerous it ought to be reclassified as a suicide device. Enough said.


#100

Are you still accepting cars for review?


#101

Tbh, it’s a pretty amature job at simulating. Because the two engines are supposed to be the same, I basically doubled the power and then tweaked the gearbox to get longer gears than Automation would allow (it restricted me to only about a 250km/h top speed, instead of the >400km/h it’s capable of), as well as slower gear changes. Unfortunately I don’t really know how to fix the issue of too much drag + tyre blow outs once over about 400km/h… I also pushed up the interior quality and safety to max, with fortunately equalled a weight increase of about the same as an extra engine, althout the weight distribution won’t be quite accurate.

EDIT: I should probably point out (and to give some context to the issues with braking), the car weighs over 2200kg :smiley:

2nd EDIT: Just in case you’re feeling masochistic @kmBlaine, Bechov did attempt another landspeed record a couple of decades afterwards… :wink:


#102

Jeez its already been another too long. WTF is wrong with me?

(Actually no don’t ask. The answer is too long)

So question.

Who would like to see me stream these?

Even more raw and to the point. I’ve been hesitant to take this approach for… personal and um… quite frankly stupid reasons – part of that way too long answer – but I think that is sort of where this should have started anyways?


#103

I wouldn’t mind, as long as I can watch the streams after they’ve gone live. Sometimes I don’t necessarily notice a stream right away, and sometimes I just don’t have time to watch it live.


#104

I’m all for it. Just an important note: test your stuff beforehand and test after any major mods / updates / changes.

I recently had problems with my own beam/automation stream and found it was due to a visual mod I had installed on beam.


#105

I would like to see that happen, would be more authentic in terms of actual first impressions. as findRED19 said, test stuff before the actual streaming for bugs.


#106

can someone tell me how to PM so I can submit my car.


#107

Click the Icon of the person you want to PM and a new window will open, select message.


#108

Really like the reviews, reminds me of Topgear with less challenges, and more (dream) car reviews.

I present for your review the PMC Goleuni (“Lightning” in Welsh).

If you don’t want to go down the entire history, PMC fell out of the consumer market in the early 50s because BTAG (Big Three Automotive Group) make shiny new cars faster. PMC then focused on commercial vehicles until the mid to late 80s when the company entered rally and road racing. Several street cars have resulted from the racing image.

The car sent is their all new GT circuit car. There is a road legal version, but for you I have sent the absolutely not road legal racing version sporting a 1500HP 6.0L V12. The road legal version makes 1000HP in “GT” trim, or a mere 640HP in the RWD “base” version.
image
As a request in your review, I would like to see you drive the car one loop around the highway in “American Road.” The road basically follows the divided highway along the straight, across a mountain road (still highway), through a tunnel, and back to the straight. Best of luck to you. A fair warning, the car is capable of flight.

For the rest of the review this is a purpose built racing car and as such was never intended for normal driving, or indeed even to be sold to the general public (in this spec).

I have PMd a link to the ZIP file (can’t upload 22MB). The latest automation update kinda broke the car, and I havn’t fixed it yet.


#109

Streaming Sounds Like a Go!


Due to the positive responses and complete absence of any negative feedback so far, I am going to start transitioning this into a streamed series with edited versions coming out on a lag for those who miss the broadcast. Reasons:

  • As previously established this is probably where the series should have started since the whole point is just getting the car reviewed quick and dirty; no second takes.

  • My schedule being what it is, setting aside a single day/night to stream and then being able to half ass the editing is going to be a lot more manageable than polishing a video to perfection (which again is sort of not what this was all about).

Also, I have an idea; coordinate with authors so they can see their car live and this will result in ACTUAL SCHEDULED PREMIERE DATES! Yeah how does that sounds :wink:!?

  • Yes I am aware of time zones. I am just going to play this one by ear. It might result in me streaming at some weird times (for me at least; US Eastern by the way). This is a big reason why I intend to deliver a post-stream version because we’re not all in each other’s time zones now are we? :stuck_out_tongue:

Testing 1-2-3


As people have rightly recommended, I will be conducting tests of my setup tonight and tomorrow morning:

Twitch TV @ kmblaine

18 May 2019, 23:00 Eastern Daylight Time

19 May 2019, 10:00 Eastern Daylight Time


I’ll probably just be doing my usual thing i.e. making 70s and 80s Malaise barges :slight_smile:


#110

Will you still be recording/posting the reviews to view outside the stream?


#111

NEGATIVE FEEDBACK! I hate the idea. It’s all bad. terrible proposition… wait, what am I objecting to?


#112

Saturday, 1 June 2019, 21:00 US Eastern Daylight Time - Retro Age Motors Saint Vasia


Yeah this is finally happening!

I’ve been waiting for some shit storms in my life to die down :triumph: and on that front I just got some great news today! But more on that later.

So this coming Saturday I will be streaming the review Retro Age Motors Saint Vasia as a sort of personal celebration. Unfortunately the author @loflyh has informed me their schedule is non-cooperative. :cry:

That all being said for future refence on scheduling and such, I would like to know where my primary viewership will be coming from.

Simple question: What time zone are you in?

Sorry I had to bunch these up a little because the poll only allows 20 options

  • UTC -12, -11
  • UTC -10, -9
  • UTC -8, -7
  • UTC -6, -5
  • UTC -4, -3 (This is me - US Eastern Daylight)
  • UTC -2, -1
  • UTC 0
  • UTC +1, +2
  • UTC +3, +4
  • UTC +5, +6
  • UTC +7, +8
  • UTC +9, +10
  • UTC +11, +12

0 voters

Also I am assuming most people have relatively normal schedules i.e. at work, school, etc somewhere in the 7:00 to 19:00 range. But I could be wrong?

Are your normal work, school, etc hours about 7:00 to 19:00?

  • Yes
  • No

0 voters


#113

Trying to get back into contributing stuff after I had a “Retreat From Life” episode for a minute or two. I’ll have to see what I’ve got to tweak and send in for review.


#114

Saturday, 8 June 2019, 21:00 US Eastern Daylight Time - Kasai Yama YMMX Turbo


By @goblin95

In regards to schedule:

I see a few more people have chimed in on the survey and those results will be added. But basics so far are that most people are in UTC -4 or UTC +2 / + 3 which makes a lot of sense. That correlates to east coasts of US and Canada and central Europe :slightly_smiling_face: . And between 2/3 and 3/4 of you are on relatively typical schedules.

As we can see from this graphic I put together, scheduling for between 0:00 and 2:00 UTC 0 (so between 20:00 and 22:00 for me) puts most people viewing during golden hours and a few of you perhaps a little past bedtime. Sorry to the Australia New Zealand folk though. Ironically, at the time this was compiled your were somewhat of a minority. Optimal time for everyone else means your work / school day is just getting started :cry: .

Will update as appropriate but this was what was driving my decision for this week.

Working on the edited version of last week’s stream. Hope to have that up by Friday, this week.


#115

Retro Age Motors Saint Vasia


Stream edit is live

Also because streamed, format is a bit different. We’ll see how this plays out.


#116

One quick little pointer: I believe all (or almost all) automation engines get race intakes visually when exported to Beam. Just something I’ve noticed in your vids.


#117

Retro Age always making strange yet awesome cars.


#118

You are correct sir! Good catch. My apologies to anyone who may have suffered that criticism, in particular @loflyh

Relevant frame grabs:

As we can see a performance intake actually gets rendered as a race intake in beam.