Corvette6317's Mods

For descriptions/images check the Steam link

60sSedanCorvette:
Steam; steamcommunity.com/sharedfiles/f … =468033840
Standalone; dropbox.com/s/dxps5r50z3xk7 … e.zip?dl=0

00sCoupeCorvette:
Steam; steamcommunity.com/sharedfiles/f … earchtext=
Standalone; dropbox.com/s/44uhnt237m43j … e.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1303648243

60sMRCoupeCorvette:
Steam; steamcommunity.com/sharedfiles/f … earchtext=
Standalone; dropbox.com/s/5n9zw71muzirb … e.zip?dl=0

70sSedanCorvette:
Steam; steamcommunity.com/sharedfiles/f … =578780971
Standalone; dropbox.com/s/p071mh1f7bccv … e.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1218189410

90sMRSmallCorvette:
Steam; steamcommunity.com/sharedfiles/f … =583161520
Standalone; dropbox.com/s/he4hgxftdyzyx … e.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1248381896

10sMidSedanCorvette:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=600064191
Standalone; https://www.dropbox.com/s/svq928rxrk0qae8/10sSedanMidCorvette.zip?dl=0
Unreal; https://steamcommunity.com/sharedfiles/filedetails/?id=1369168151

40sSedanCorvette:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=636250761&searchtext=
Standalone; dropbox.com/s/akxy2l58ip5ny … e.zip?dl=0

00sSport/GTCorvette:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=735013471
Standalone: https://www.dropbox.com/s/q2pcdsojyiywsvs/00sGTCorvette.zip?dl=0

10sFullSedan:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=782604603
Standalone; https://www.dropbox.com/s/7gqoyqmw6q31ngn/10sSedanFullCorvette.zip?dl=0
Unreal; https://steamcommunity.com/sharedfiles/filedetails/?id=1378348130

80sCompact:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=866352795
Standalone; https://www.dropbox.com/s/qafxfbtfari37bh/80sCompactCorvette.zip?dl=0

10sSport:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=952417975
Standalone; https://www.dropbox.com/s/c8wvdia0s9gzlb5/10sSportCorvette.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1212134406

80sExecutive:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=1129627051
Standalone; https://www.dropbox.com/s/2e714hs3g3nsidi/80sExecutiveCorvette.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1222891158

10sSuper:
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1228188589

70sLimo:
Unreal; https://steamcommunity.com/sharedfiles/filedetails/?id=1395019661

90sCoupe:
Unreal; https://steamcommunity.com/sharedfiles/filedetails/?id=1415174988

CorvetteC7 Style Grille:
Steam; steamcommunity.com/sharedfiles/f … =573081912
Standalone; dropbox.com/s/33q22kl1kcuzw … 1.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1166023424

Countach Style Wing:
Steam; steamcommunity.com/sharedfiles/f … =573124530
Standalone; dropbox.com/s/h2u4h3jtvw4nm … 1.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1165192456

Porthole Side Windows:
Steam; steamcommunity.com/sharedfiles/f … =580359427
Standalone; dropbox.com/s/1x0by70pdsykv … e.zip?dl=0

Shaker-style Scoop:
Steam; steamcommunity.com/sharedfiles/f … =593083608
Standalone; dropbox.com/s/7rka1khizhl7x … r.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1165207105

Wing02:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=735492473
Standalone Original; https://www.dropbox.com/s/petp9o7u7pgo0vt/CorvetteWing02.zip?dl
Standalone Revised; https://www.dropbox.com/s/txo0zoavygo6c8g/CorvetteWing02.rar?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1164344022

GT Wing:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=746535441
Standalone; https://www.dropbox.com/s/o22ai2a22b1hehk/CorvetteWing03.zip?dl=0

Vent01:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=958101816
Standalone; https://www.dropbox.com/s/vbm18vjufuggivm/CorvetteVent01.zip?dl=0
Unreal; http://steamcommunity.com/sharedfiles/filedetails/?id=1164313935

Wing04:
Steam; http://steamcommunity.com/sharedfiles/filedetails/?id=960031148
Standalone; https://www.dropbox.com/s/0i0kr9tk2lf20a6/CorvetteWing04.zip?dl=0

Vent02:
Unreal; https://steamcommunity.com/sharedfiles/filedetails/?id=1395635652

2 Likes

Pretty nice.

A new grille based on the Corvette C7, it doesn’t have any variants apart from the one shown in the picture but I plan to make more later. If anyone else wants to make and upload variants of it they are welcome to.



corvettec7_grille.zip (17.9 KB)

Seems quite nice. I’ll check it later when I get home. If you need help with the morphing, and have questions that haven’t been answered by Andy’s vid, me, Pyrlix and Kubboz are regularly on the game’s IRC.

Also, don’t worry about the file name.

Nice work! It’s actually kind of reminiscent of a '68 Plymouth Barracuda.

Nice work. :slight_smile:

It has some pretty interesting morphs, and while sometimes you can make some pretty messy stuff, I’d rather have too much morphing and just have to tweak it around a bit to get the body lines straight than not having enough options to morph.

My only complaint is the lack of downward morphing of the front end. It would be nice to be able to point the nose down a bit more for that pointy aggressive look.

Decided to look at it a bit more in detail and I have to say that it is quite nice, but there are still a few small things that can be made better.

1- Mesh

The mesh itself is very good, and you don’t really need to change it. The thing I will mention is that most 3d artists make their windows slightly recessed into the body to give slightly more depth.

2- UVW Mapping

Works fairly well for the most part, which is very good considering this part can be hard to get right, especially in the beginning.

On the front part though, stamping anywhere further back on that zone results in very bad jaggies. I would reccomend trying to redo the UVW Mapping to try to fix that problem. What I usually do is drag a vent around to see if everything works well.

The seams on the front part do not stamp. This is probably caused by incorrect material assignation in the .lua file.

You also have some stamping problems on the upper back corners of the car, where it makes the hole larger than it should.

3- Morphing

Front-

I would recommend making the morph that slopes the hood a bit longer. Right now it just slopes the very tip of it.
Also, 3DS Max, being the #$@!$ program that it is, will modify your old weights when assigning new ones on certain vertices, creating things like what happens with your current “front lengthening” morph.

Windshield-

I am personally not a big fan of the technique used as it tends to be a PITA to make properly.

Yours works well, although the top morph tend to create a lot of weird creases in the side windows.

Door seam-

I understand what you were trying to do, but IMHO the results are not really visually appealing. I would suggest maybe making one bone that moves what the current two move, and one bone that would extend the door in a more smoother fashion like this.

Back window-

The morphs work quite well for the most part, but there are a few things I would recommend that you try to rework a little.

The upper one creates a few bumps on the back pillar when morphing up.

The lower one creates two weird spikes that show up when morphing back and up.

I would also recommend that you make the lower back morph affect a little bit more of the trunk, so it has less of a tendency to create creases.

Trunk-

Works very well although some of the possible results are quite interesting :smiley:

Hoping you will continue making more awesome models like this one because you show a lot of potential.

Thanks for the feedback, I’ll look into the issued trackpaduser mentioned and see what I can do to improve it. I’ve also been working on a sedan version and have tidied up the mesh a bit, that will probably make the morphing go much smoother and I’ll probably redo the coupe when I’ve gotten some more practice.

My 60s coupe has been updated, check OP for pics and download.

60sSedan/Coupe had been updated again, link and pictures in OP.

Is this you steamcommunity.com/sharedfiles/f … =469714186 ?

I know you updated the complete pack on steam, so I found it very weird when I saw that.

[quote=“trackpaduser”]Is this you steamcommunity.com/sharedfiles/f … =469714186 ?

I know you updated the complete pack on steam, so I found it very weird when I saw that.[/quote]

Thank you for telling me, it’s not an account of mine and I’ve asked them to remove it.

New coupe body that can be morphed between a Camaro or a Mustang.

Steam Workshop Link: steamcommunity.com/sharedfiles/f … earchtext=
00CoupeCorvette.zip (188 KB)


Ohhh Yes :smiley:
That looks very good!

Very nice.

I have to say that it looks quite good for the most part, although the sides of the car have somewhat of a weird look to them.

Could you post pictures of your mesh, especially the sides?

I would also suggest to add a few polygons on the length of the car, mainly to smoothen the seams of the hood a little bit as they look very angular right now. It will add polygons but it should not cause any problems since your model doesn’t really seem to be polygon heavy.

Appart from this you did a very nice job, stamping seems to work well, and the morphs are also very nice.

DAYUM

Working on a Shooting Brake (wagon-like coupe) version of my 00Coupe, anyone know what’s causing this? I tested it in-game before making the rear seams and it was fine. After making them this happened.


Have you tried deleting the skin and adding a new one with only the root and one other bone? don’t spend any time with morphs, just see if that cures the mess

Nope, I already tried reloading a backup of before I cut the seams and starting over. Same result. It’s like it was caused when I made the seams and assigned the material IDs, but I’ve triple-checked both them and the smoothing groups and nothing is wrong.

Yeah, this is caused by isolated vertices.

To fix this issue, use the following button.