123P11
Production years: 1946 through 1957
Shared specs:
- Pushrod inline 3, cast iron block, cast iron head
- Bore: 72mm
- Stroke: 85.7mm
- Displacement: 1046cc
Cars used in:
- 1946-1955 Plebia 4P
- 1946-1953 Plebia Plateau
- 1946-1957 Plebia Fourgonnette
Ce (1946-1957)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 6.6:1
- Naturally aspirated
- Single barrel eco carb
- 4600rpm redline
- Leaded 92
- Cast log exhaust header
- Two baffled mufflers
1 Like
236P23
Production years: 1949 through 1965
Shared specs:
- Pushrod inline 6, cast iron block, cast iron head
- Bore: 72mm
- Stroke: 94.4mm
- Displacement: 2306cc
Cars used in:
- 1949-1960 Foreia mk1
- 1960-1974 Foreia mk2 (pre-facelift only, 233L trims only)
Ce2 (1949-1960)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 6.6:1
- Naturally aspirated
- Twin Single barrel eco carb
- 4700rpm redline
- Leaded 92
- Cast log exhaust header
- Two baffled mufflers
Used in: 1949-1960 Mk1 Foreia 232
Ce3 (1949-1960)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 6.9:1
- Naturally aspirated
- Triple Single barrel eco carb
- 4800rpm redline
- Leaded 92
- Short cast exhaust header
- Two baffled mufflers
Used in: 1949-1960 mk1 Foreia 233L
C4 (1949-1960)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Twin two barrel carb
- 5000rpm redline
- Leaded 92
- Tubular exhaust header
- Two baffled mufflers
Used in: 1949-1960 mk1 Foreia 234C / 234D
Ce3-92 (1960-1965)
(for 92hp, no change in technology worth mentioning)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Triple single barrel eco carb
- 5200rpm redline
- Leaded 92
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1960-1965 Mk2 Foreia 233L
1 Like
154P15
Production years: 1955 through 1975
Shared specs:
- Pushrod inline 4, cast iron block, cast iron head
- Bore: 72mm
- Stroke: 94.4mm
- Displacement: 1537cc
Cars used in:
- 1955-1965 Mesaia mk1
- 1960-1974 Foreia mk2 (pre-facelift only, 152 only)
- 1965-1975 Mesaia mk2
Ce2 (1955-1965)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 5000rpm redline
- Leaded 92
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1955-1965 mk1 Mesaia 152L
Ce2U (1965-1975)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 5400rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1965-1975 mk2 Mesaia 152M / Gendarmerie special order
Ce2-65 (1960-1965)
(for 65hp, extra punch needed for the weight of the car)
Specs:
- Internals: Cast crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 7.4:1
- Naturally aspirated
- Twin single barrel eco carb
- 5400rpm redline
- Leaded 92
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1960-1965 mk2 Foreia 152
DC2 (1960-1965)
Specs:
- Internals: Cast crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.8:1
- Naturally aspirated
- Twin DCOE carb
- 5800rpm redline
- Leaded 92
- Tubular exhaust header
- Two reverse flow mufflers
Used in: 1960-1965 Mk1 Mesaia 154S
154P13
Production years: 1955 through 1975
Shared specs:
- Pushrod inline 4, cast iron block, cast iron head
- Bore: 72mm
- Stroke: 80.2mm
- Displacement: 1307cc
Cars used in:
- 1955-1965 Mesaia mk1
- 1965-1975 Mesaia mk2
Ce2 (1955-1965)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 5000rpm redline
- Leaded 92
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1955-1965 mk1 Mesaia 132
Ce2U (1955-1965)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 5500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1965-1975 mk2 Mesaia 132
123P8
Production years: 1955 through 1975
Shared specs:
- Pushrod inline 3, cast iron block, cast iron head
- Bore: 64.8mm
- Stroke: 80.2mm
- Displacement: 794cc
Cars used in:
Ce (1955-1965)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 5100rpm redline
- Leaded 92
- Short cast exhaust header
- Two baffled mufflers
Used in: 1955-1965 mk2 Plebia 81
CeU (1965-1975)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 5500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1965-1975 mk2 Plebia 81
123P10
Production years: 1955 through 1975
Shared specs:
- Pushrod inline 3, cast iron block, cast iron head
- Bore: 72mm
- Stroke: 81.8mm
- Displacement: 1000cc
Cars used in:
Ce (1955-1965)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 5200rpm redline
- Leaded 92
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1955-1965 mk2 Plebia 101M/101L
CeU (1965-1975)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 5600rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1965-1975 mk2 Plebia 101M/101L
236P20
Production years: 1960 through 1965
Shared specs:
- Pushrod inline 6, cast iron block, cast iron head
- Bore: 72mm
- Stroke: 81.8mm
- Displacement: 1999cc
Cars used in:
Ce3 (1960-1965)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.2:1
- Naturally aspirated
- Triple Single barrel eco carb
- 5200rpm redline
- Leaded 92
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1960-1965 mk2 Foreia 203M
133S10
Production years: 1965 through 19??
Shared specs:
- Bore: 77.1mm
- Stroke: 71.5mm
- Displacement: 1000cc
Cars used in:
C2U (1965-1975)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 7.6:1
- Naturally aspirated
- Two barrel carb
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1965-1975 Plebia 102S
184S16
Production years: 1965 through 19??
Shared specs:
- Direct acting SOHC Inline 4, cast iron block, cast iron head
- Bore: 78.7mm
- Stroke: 82.2mm
- Displacement: 1599cc
Cars used in:
- 1960-1974 Foreia Mk2
- 1965-1975 Mesaia Mk2
- 1974-19?? Foreia Mk3
- 1975-19?? Mesaia Mk3
Ce2U (1965-1975)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Twin single barrel eco carb
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1965-1974 Mk2 Foreia 162
- 1965-1975 Mk2 Mesaia 162L
Ce2UE (1974-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1974-19?? Mk3 Foreia 1.6 BL
- 1975-19?? Mk3 Mesaia 1.6 GL
DCU (1965-1972)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.4:1
- Naturally aspirated
- Twin DCOE carb
- 6700rpm redline
- Unleaded 91
- Tubular exhaust header
- Two baffled mufflers
Used in:
- 1965-1972 Mk2 Mesaia 164S
ME (1978-19??)
Specs:
- Internals: cast crank, cast rods, hypereutectic cast pistons
- Compression ratio: 8.3:1
- Naturally aspirated
- Mechanical fuel injection, single throttle body
- 6900rpm redline
- Unleaded 91
- Tubular exhaust header
- One straight through and one reverse flow muffler
Used in:
ME-US (1978-19??)
Specs:
- Internals: cast crank, cast rods, hypereutectic cast pistons
- Compression ratio: 7.2:1
- Naturally aspirated
- Mechanical fuel injection, single throttle body
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- One straight through and one reverse flow muffler
Used in:
- 1978-19?? Mk3 Mesaia 1.6 CLI US
Mpi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.1:1
- Naturally aspirated
- Multipoint EFI
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
184S18
Production years: 1965 through 19??
Shared specs:
- Direct acting SOHC Inline 4, cast iron block, cast iron head
- Bore: 84.2mm
- Stroke: 82.2mm
- Displacement: 1831cc
Cars used in:
- 1960-1974 Foreia Mk2
- 1974-19?? Foreia Mk3
- 1976-19?? Ochlosia Mk1
Ce2U (1965-1974)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 6.9:1
- Naturally aspirated
- Twin single barrel eco carb
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1965-1974 Mk2 Foreia 182M
Ce2UE (1974-1983)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1974-1982 Mk3 Foreia 1.8 GL
*1976-1983 Mk1 Ochlosia 1.8 Van
ME (1978-1982)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.5:1
- Naturally aspirated
- Mechanical fuel injection, single throttle body
- 6400rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1978-19?? Mk3 Foreia 1.8 GL Injection
Mpi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.2:1
- Naturally aspirated
- Multipoint fuel injection, single throttle body
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
236S21
Production years: 1965 through 1974
Shared specs:
- Direct acting SOHC Inline 6, cast iron block, cast iron head
- Bore: 73.6mm
- Stroke: 82mm
- Displacement: 2093cc
Cars used in:
Ce3U (1965-1974)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Triple single barrel eco carb
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1965-1974 Mk2 Foreia 213L
236S23
Production years: 1965 through 19??
Shared specs:
- Direct acting SOHC Inline 6, cast iron block, cast iron head
- Bore: 73.6mm
- Stroke: 90.8mm
- Displacement: 2318cc
Cars used in:
- 1960-1974 Foreia Mk2
- 1974-19?? Klinos Mk1
- 1978-19?? Coupe / Tetra
DCU (1965-1972)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 7.8:1
- Naturally aspirated
- Twin DCOE carbs
- 6200rpm redline
- Unleaded 91
- Tubular exhaust header
- One reverse flow and one baffled mufflers
Used in:
- 1965-1972 Mk2 Foreia 234S
Ce3-US (1972-1974)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Triple single barrel eco carb
- 5700rpm redline
- Unleaded 91
- Short cast exhaust header
- One reverse flow muffler
Used in:
- 1972-1974 Mk2 Foreia 233L (US export)
ME (1978-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.6:1
- Naturally aspirated
- Mechanical fuel injection with single throttle body
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- One baffled and one reverse flow mufflers
Used in:
- 1978-19?? Mk1 Klinos GLSi
- 1978-19?? Mk1 Coupe CS
MTE (1978-19??)
Specs:
- Internals: Cast crank, Heavy duty forged rods, Hypereutectic cast pistons
- Compression ratio: 6.0:1
- Single, journal bearing turbo @ 0.76bar
- Mechanical fuel injection with single throttle body
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- One baffled and one reverse flow mufflers
Used in:
- 1978-19?? Mk1 Klinos Excellence
- 1978-19?? Mk1 Coupe Turbo
MT (1981-1984)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 6.0:1
- Single, ball bearing turbo @ 1.03bar
- Mechanical fuel injection with single throttle body
- 6600rpm redline
- Unleaded 91
- Short cast exhaust header
- One straight through and one reverse flow mufflers
Used in:
- 1981-1984 Coupe Tetra evo 1
MpiT (1982-1984)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 7.0:1
- Single, ball bearing turbo @ 1.03bar
- Multipoint EFI with single throttle body
- 6700rpm redline
- Unleaded 95
- Short cast exhaust header
- One straight through and one reverse flow mufflers
Used in:
- 1982-1984 Coupe Tetra evo 2
1 Like
236S22
(destroked 236S23, necessary to fit hypereutectic cast pistons on 1974 tech and still get a decent redline)
Production years: 1974 through 19??
Shared specs:
- Direct acting SOHC Inline 6, cast iron block, cast iron head
- Bore: 73.6mm
- Stroke: 84.9mm
- Displacement: 2167cc
Cars used in:
- 1974-19?? Klinos Mk1
- 1976-19?? Ochlosia
Ce3UE (1974-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Triple single barrel eco carbs
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1974-19?? Mk1 Klinos GLS
- 1976-19?? Ochlosia Camper
123P9
Production years: 1975 through 1985
Shared specs:
- Pushrod inline 3, cast iron block, cast iron head
- Bore: 69mm
- Stroke: 80.2mm
- Displacement: 899cc
Cars used in:
CeUE (1975-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 5800rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
133S11
Production years: 1975 through 19??
Shared specs:
- Direct acting SOHC inline 3, cast iron block, cast iron head
- Bore: 81mm
- Stroke: 71.5mm
- Displacement: 1105cc
Cars used in:
- 1975-19?? Mk3 Mesaia
- 1955-1985 Mk2 Plebia
- 1985-19?? Mk1 Dima
CeUE (1975-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 6400rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1975-1982 Mk3 Mesaia 1.1 BL
- 1975-1985
Spi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.3:1
- Naturally aspirated
- Single point EFI
- 6400rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1982-19?? Mk3 Mesaia 1.1 BLi
- 1985-19?? Mk1 Dima 1.1 CL
184S13
Production years: 1975 through 19??
Shared specs:
- Direct acting SOHC inline 4, cast iron block, cast iron head
- Bore: 75.8mm
- Stroke: 72.1mm
- Displacement: 1300cc
Cars used in:
Ce2UE (1975-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1975-19?? Mk3 Mesaia 1.3 CL
Mpi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.9:1
- Naturally aspirated
- Multipoint fuel injection
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1982-19?? Mk3 Mesaia 1.3 CLi
133S13
Production years: 1978 through 1996
Shared specs:
- Direct acting SOHC inline 3, cast iron block, cast iron head
- Bore: 81mm
- Stroke: 84.1mm
- Displacement: 1300cc
Cars used in:
- 1955-1985 Mk2 Plebia
- 1975-19?? Mk3 Mesaia
- 1985-19?? Mk1 Dima
Spi (1978-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.4:1
- Naturally aspirated
- Throttle body fuel injection
- 6300rpm redline
- Unleaded 91
- Tubular exhaust header
- One straight through, one reverse flow mufflers
Used in:
Spi-US (1978-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.4:1
- Naturally aspirated
- Throttle body fuel injection
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- One straight through, one reverse flow mufflers
Used in:
Mpi (1985-1991)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.2:1
- Naturally aspirated
- Multipoint fuel injection
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1985-1991 Mk1 Dima 1.3GL / Dimatic 1.3 CL/GL
Mpi Euro 1 (1991-1996)
Specs:
- Internals: Cast crank, Cast rods, low friction cast pistons
- Compression ratio: 8.0:1
- Naturally aspirated
- Multipoint fuel injection
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Catalytic converter + Two reverse flow mufflers
Used in:
- 1991-1996 Mk3 Mesaia 1.3 BL
FAAL Senior Legal Compliance Management - Intellectual Property - internal communication to FAAL Communication Head of Department
Dear colleague,
In relation to your recent communication regarding the FAAL engines, the legal department wishes to notify you that a product cannot both be a non-registered trademark, indicated by ™, as well as a registrered trademark, indicated by ® .
I also wish to stress that this indication or registration is only valid in the US. Individual registrations should be filed in individual nations or regions, perhaps beginning with enregistrement de marque in France. A Community Trade Mark/EU Trade mark is available from at the latest 1994.
Kind regards,
Legal-IP
That’s quite an impressive list of cheap, easy-to-build engines you’ve got there - unpretentious, not too complex and just enough power for the cars in which they are installed. But the engine for your upcoming Group B homologation special is unlikely to be any of those things…