There won’t be too much specs and stuff, but it’s pretty much using high-end race parts for the most. And yes, this is another limited edition car I made based on Abigail REV so if you want the car, feel free to direct message me for the .car file.
New month, new car, and a month closer to Reiko Walker’s Day. Here’s one of my latest design:
So, what are you looking at right now, is my first off-road vehicle, made by Enricord Motors, making it the first Enricord model to be made in UE4. My attempt here is to design a cheap off-road vehicle. This car itself is named after a mountain in Indonesia, which is the Bromo mountain. Here’s the quick specs and the performance figures!
Model and Trim Name: Enricord Bromo 4x4
Model and Trim Year: 2018/2019
Layout: Front-Engined, 4-Wheel Drive
Engine: 2.0L Turbocharged Inline-4 producing 140 HP @5600 RPM and 220 Nm of Torque @2800 RPM
Transmission: 6-Speed Manual Locker Manual
Suspension: Progressive Springs - Twin Tube Dampers - Off-Road Sway Bars
Tyres: 205F/215R Chunky Off-Road
Interior: 4-Seater - Basic Infotainment
Driving Assists: ABS, TC, and ESC
Weight: 1500 Kg
MSRP: 11k - 13k (Automation credits)
Top Speed: 105 Mp/h
0 to 60: 10.5 seconds
50 to 75: 8.6 seconds
Braking 62 to 0: 50.4 meter
Cornering 20m: 0.73g
Cornering 200m: 0.70g
Roll Angle: 7.1 degrees
Weight Distribution: 52F/48R
I will upload the .car files in 24 hours post reveal. This is my first off-road vehicle so there may be some mistakes made. Let me know what you think and have a nice day!
One of the best legendary Pokemon of all time, with my imagination, becomes a track only super-car with serious track capabilities. Comes with 4.5L Twin-Turbo V10 producing 900 HP. Capable to hit the Top Gear Test Track in under 1:06. Interested? This is a limited edition model so PM me if you want one.
The day I’ve been waiting for, Happy Reiko Walker’s Day, everyone!.
For the first car I uploaded as a 22 years old right now, I’d like to share one of my latest model that I’ve wanted to release since a month and half ago, so here it is…
Enricord Saguaro is a 2-Door, 2+2 seater pony car made by Enricord Motors. The 2nd Enricord model to be revisited in Automation UE4. It’s heavily inspired by Ford Mustang and Chevrolet Camaro.
Special for this model alone, I will upload the .car file right away for all of you to enjoy on BeamNG Repository. Once again, happy Reiko Walker’s day!
At long last, I finally get to see my vision in a more beautiful way than before. Here it is, the Porsche 911 straight from my imagination, the 2018 Serena S6 3.8S!
I always wanted to design my very own vision of the new Porsche 911, but slightly more affordable. The Porsche Mission-E was the main inspiration for the headlights and taillights, and with few influences from my designs in that time, this design was born. And the Serena name, in case you don’t know, is named after a character from Pokemon franchise.
Here’s the quick specs and performance figures in case you are wondering:
As usual, the .car file will be uploaded 24 hours post reveal. I would like to know what do you think, and I hope you have a nice day!
We all have a childhood, I can assure you that for the most part, it’s either good or bad. There may be some kind of childhood stuff that somehow stuck in your mind for a long time, or just got reminded again. Well, that’s what happened to me.
The thing is, the car you’re seeing now, is a part of my childhood, believe it or not. The story begins about 9 years ago, I was into FnF movies (Tokyo Drift to be exact), later on I had some kind of thoughts about a character named Ecura Inkilla, a young spy that specializes in street racing scene, of some sort. He was tasked to be in a part of high-end tier street racing as an undercover street racer.
The EIRS name is actually a short for Ecura Inkilla’s Racing Specialty, while the design itself is based on my favorite cars back in the day such as Mazda RX-7 Veilside, Nissan Skyline GT-R R34 and Ferrari 550 Maranello. It might be slightly anachronistic, but that’s what my 13-years old’s brain had in that time.
Expect one thing though, high revving twin turbo V8 Flatplane (now you can imagine how this car will sound like) and if you wonder how it performs, it can go from 0 to 60 in 2.6 seconds and reaching top speed over 200 Mp/h (theoretically), and hit the Top Gear test track under 1:12.6 (all those numbers are Automation numbers).
This is not a limited edition model. And the .car file? I will upload it here instead of the BeamNG repository as soon as I have time (most likely tomorrow). Have a good day.
EIRS - GTS.car (48.6 KB)
A luxurious British car company based on Rolls-Royce and Bentley, Ainsworth Automobile, made an attempt of realizing their vision of luxury sports car aside from producing luxury sedans.
Just like the previous ones, there won’t be any specs or numbers revealed but expect those things when you get your hands on one of these: It’s being powered under the hood by 7.0L Twin Turbo V12 producing over 750 Horsepower and capable of launching from 0 to 60 mph in 2.6 seconds.
It doesn’t stop there just yet, inside you will be greeted by the luxurious interior and infotainment, so expect being comfortable while you’re speeding.
Just like the previous ones part II, it is not a limited edition model (or more like exclusive if you ask me so I’d refer to some of the limited editions as exclusives from now on). The .car file is now available only on this thread so here you go and I hope you have a nice day!
Ainsworth Astoria - Concept.car (39.9 KB)
WARNING: If you don’t like anime or some moe, it’s recommended for you to not continue reading. Reader’s discretion advised.
The Japari Park needs something new, something that will make you capable to cruise Japari Park cheaper and way more fun to meet some “friends”. The Japari Bug exists for a reason, it’s for Japari Park, simple. It’s a perfect car if you want to cruise around Japari Park with your “friends”.
If you watch Kemono Friends and love the show, you will love this thing! You want to know something better? You can even now drive and explore the whole Japari Park with this cute little bug!
There won’t be any specs revealed, but the thing I want to let you know is, you can go almost anywhere at a cheap price. So, how about give this car a try? Once again, have fun!
RWD Japari Bug - Off-Road.car (40.5 KB)
It is almost a year to celebrate the Automation x BeamNG collaboration, to celebrate the first car to
be uploaded as on this forum. Originally, I want to present this in 18th July, the day Cellia Fidelia GRS was revealed, but I’m going to post it way earlier for one reason. I was reminded that this car is a tribute to my friend which happens to have her birthday on 6th July (yesterday), also this car’s name is named after her last name (and with a little change like I always do, of course). But before you proceed to see the changes, you want to take a look at this post first (in case you have forgotten):
If you have seen it, you may as well proceed.
CHANGES
There are few changes made from the original design of the car. The first change you may notice is the exterior design.
As I have improved my car design skill overtime, I decided to redesign it slightly from the headlight design which now has 3 bars compared to the previous version, and the spoiler has a slight redesign. The front and rear bumpers has also redesigned.
There are changes under the hood as well. This time, the inline engine will take place as the new powerplant for the car, as I find it has more potential than the boxer (especially the power curves and turbo spools way earlier while generating more power with the similar configuration) despite having worse weight distribution. The interior now has equipped with actual sporty interior and have 5 seats (expect this car will be much more expensive than the original at this point since the big update 2 months ago (iirc)).
SPECS
MODEL AND CHASSIS
Model/Trim Year: 2017/2019
Chassis: AHS Steel Monocoque
Suspension: Double Wishbone (F/R) Double Wishbone
Engine Placement: Front Transversal
Body Panel: Aluminium
ENGINE
Family: Cellia FD424 Inline-4 2.4L (2420cc)
Variant: GRS-360
Aspiration: Turbocharged
Fuel System: Direct Injection - Throttle Per Cylinder - Performance
Power: 360 HP @7500 RPM
Torque: 360 Nm @5200 RPM
Fuel Economy: 24.5%
TRIM
Body Style: 4-Door Sedan
Drivetrain: All-Wheel-Drive (40F/60R)
Transmission: 6-Speed Geared LSD Manual
Tyres: Sports Compound Tyres
Suspension: Standard Springs - Adaptive Dampers - Semi-Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
Top Speed: 167 Mph
0 to 60 Mph: 4.5 sec
50 to 75 Mph: 3.3 sec
Cornering 20m: 1.17g
Cornering 200m: 1.18g
1/4 Mile: 13.04 sec
1 Km: 24 sec
Roll Angle: 4.6 degrees
62 to 0: 32.5 m
Weight: 1540 Kg
I will post the .car file for all of you to enjoy in 24 hours post reveal. Have a good day!
I’m not a big fan of this particular Pokemon but I find Charmander would look great as a track car (if it was a car). I also originally intended it to be some sort of an affordable track-only car with cute or wacky designs, which I dub it as “Superkart” since I originally intended them to be some kind of go-kart.
MODEL
- Model/Trim Year: 2016/2020
- Chassis: Aluminum Monocoque
- Suspension: MacPherson Strut (F/R) Semi Trailing Arm
- Engine Placement: Front Longitudinal
- Body Panel: Aluminium
ENGINE
- Family: RWD Charmander i4 1.5L (1500cc)
- Variant: Superkart
- Aspiration: Naturally Aspirated
- Fuel System: Direct Injection - Throttle Per Cylinder - Race
- Headers: Race Tubular
- Power: 180 HP @8500 RPM
- Torque: 170 Nm @7200 RPM
- Fuel Economy: 20.97% - 366.8lb/hph
TRIM
- Body Style: 2-Door Coupe
- Drivetrain: Rear Wheel Drive
- Transmission: 6-Speed Geared LSD Sequential
- Tyres: 225F/245R Semi Slicks
- Undertray: Downforce
- Interior: 1-Seater Basic Interior
- Brakes: 2 Pistons 305mm Vented Disc F/R 1 Piston 285mm Vented Disc
- Suspension: Standard Springs - Semi Active Dampers - Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
- Top Speed: 126 Mph
- 0 to 60 Mph: 4.6 sec
- 50 to 75 Mph: 3.0 sec
- Cornering 20m: 1.27g
- Cornering 200m: 1.47g
- 1/4 Mile: 13.02 sec
- Roll Angle: 3.1 degrees
- 62 to 0: 29.5 m
- Weight: 790 Kg
For those who has read the details and interested in driving one, be sure to grab yours on this link. Also, let me know what are your thoughts on this car and have fun!
RWD Hitokage - Superkart.car (30.6 KB)
After so long I haven’t posted anything for almost 3 months, I decided to post again after few months of college and life stuff. So here it is, my very first attempt at creating Cyberpunk inspired vehicle, something I haven’t done before…
I actually have been trying to get the Cyberpunk look I wanted for a long time since the CSR 88, in fact I wanted to join but due to no experience in designing Cyberpunk inspired car, I decided to not join.
It’s my first attempt at applying Cyberpunk/Retrowave/Synthwave visuals so there may be few mistakes. It’s a sports car based on a mix of Lister Storm and Ferrari F40 (main inspiration for the design), with Cyberpunk twist on the exterior design and my self improvisation, of course. Without blabbering too much nonsense, let’s get to the specs and numbers, shall we?
MODEL
- Model/Trim Year: 2020/2020
- Chassis: Carbon Fibre Monocoque
- Suspension: Double Wishbone (F/R)
- Engine Placement: Front Longitudinal
- Body Panel: Carbon Fibre
ENGINE
- Family/Year: 2020 Lentera V8F (3811cc)
- Variant/Year: 2020 600-S
- Aspiration: Twin Turbo
- Fuel System: Direct Injection - Throttle Per Cylinder - Performance
- Power: 630 HP @8600 RPM
- Torque: 660 Nm @4800 RPM
- Fuel Economy: 20.80% - 369.8lb/hph
- Fuel Type: Premium (95 RON)
TRIM
- Body Style: 2-Door Coupe
- Drivetrain: All Wheel Drive (F35/R65)
- Transmission: 7-Speed Electric LSD DCT
- Tyres: 305F/315R Sports Compound
- Undertray: Downforce
- Interior: 2-Seater Sporty Interior - Premium HUD
- Brakes: 6 Pistons 375mm Carbon Ceramic F/R 6 Piston 355mm Carbon Ceramic
- Suspension: Standard Springs - Semi Active Dampers - Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
- Top Speed: 210 Mph
- 0 to 60 Mph: 2.5 sec
- 50 to 75 Mph: 1.4 sec
- Cornering 20m: 1.24g
- Cornering 200m: 1.32g
- 1/4 Mile: 10.3 sec
- Roll Angle: 2.4 degrees
- 62 to 0: 30.8 m
- Weight: 1450 Kg
By the way, it’s tanexp Exclusive so you know what that means. 24 hours post reveal, as usual (and there may be changes on the car). UPDATE: It’s here! But don’t forget to install few mods from the workshop to make it work properly (the spoiler and all the lights) before using it.
Lentera Tracer - Type-A.car (53.9 KB)
As a sign of thank you for reading this thread, here are some more pictures of the Tracer Type-A before you go…
…and I hope you have a nice day!
We’re already at the quarter finale of the year, and Need For Speed Heat is just less than two weeks. It is time for me to reveal one of my latest creation inspired from the game!
I have been fiddling with this car ever since the NFS Heat trailer came out. I’m so excited with the game so far, as if it’s going to be one of the best NFS games (for me at least, well I won’t get my hopes too much either knowing it’s EA).
Khyzyl Saleem’s Polestar in the game is the main inspiration for all the modifications done on the car. Bolt on fenders, hoods, and the big wing. And it’s nothing without what’s hiding under the hood. Still using the original engine, but this time, the car has been tuned up to 900 Horsepower (all race parts by the way), which making the car meant for something that you can use in Palm City. You can simply tell that this car can help making your name way easier at night, and get yourself more bank at the day.
It is LIMITED EDITION. If you want to win the car, DM me on Discord or on this forum
Before you go, here’s more pictures of the model.
…and I hope you have a nice day!
I get where the name comes from - it’s named after the Thermal Club, a real-life raceway in the California desert, not far from Palm Springs, and it would not be out of place there, setting new lap records every time.
To be honest with you, I didn’t know the Thermal club existed (well, I didn’t pay attention too much to the Automotive world). And I named it “Thermal” because it has something to do with the “Heat”.
Greetings, Automationeers.
Just in few days, the majority part of the world will celebrate Halloween, including me. Prepare your best costumes and be ready for the trick or treat.
By the way, all of my cute, wacky, or any car that is inspired/take influence/straight from popular culture stuff (such as Star Wars, Pokemon, etc.), will be branded under the name “Popura”.
In case you wondering, Popura Cars is a division of Reiko Walker Designs, specified for designing cars with styling cues straight from popular culture characters/cars. A mix of fantasy and reality, you can say. Popura is the place where people who wants to have fun and realizing the childhood vision of many by “bRinging uNreal Ideas tO the reality”. The price range of all the models will depend on the car itself and what it is based on. Only in Popura Cars, you will find my cheapest and most expensive creations of mine all time (for the record, the 2018 Margaret Ageratha (LIMITED EDITION MODEL) costs less than a million, somewhere near 500k price range (I made it up btw)). Popura itself is named after one of the WORKING!!! anime characters, Popura Taneshima.
By the way, let’s get to the cars. So far, there are 4 models I’ve made so far:
If anyone can guess the rest of the model that I’m going to release soon (???), will have an early access to all the models, and also have a chance to win my limited edition models. Also, DM me once you know what are those. Oh, while you’re here, you can also enjoy my creations on this thread as well.
Have a good day!
-TheAgathaNakai
The time where everyone wears their favorite costume (most likely something that will scare people or just cute costumes for those who can’t handle all the scare), going out at night and “trick or treat” stuff happened. What are you going to wear for this year’s Halloween?
Without blabbering too much nonsense. Let’s get to the cars for you guys to celebrate. I’ve designed 2 cars for this occasion. But I will reveal the first one.
Sans is currently my favorite character from Undertale (aside with Frisk). With that being said, I decided to design the car based on Sans, with Superkart specs (in case you wondering what it is, just take a look at my Popura Hitokage (RWD Hitokage) for reference.
MODEL
- Model/Trim Year: 2020/2020
- Chassis: Glued Aluminum Monocoque
- Suspension: MacPherson Strut (F/R) Semi Trailing Arm
- Engine Placement: Front Longitudinal
- Body Panel: Aluminium
ENGINE
- Family: Sans i4 1.5L (1500cc)
- Variant: Superkart
- Aspiration: Naturally Aspirated
- Fuel System: Direct Injection - Throttle Per Cylinder - Race
- Headers: Race Tubular
- Power: 190 HP @8600 RPM
- Torque: 180 Nm @7200 RPM
- Fuel Economy: 20.50% - 375.2lb/hph
TRIM
- Body Style: 2-Door Coupe
- Drivetrain: Rear Wheel Drive
- Transmission: 6-Speed Geared LSD Sequential
- Tyres: 225F/245R Semi Slicks
- Undertray: Downforce
- Interior: 1-Seater Basic Interior
- Brakes: 2 Pistons 295mm Vented Disc F/R 1 Piston 295mm Vented Disc
- Suspension: Standard Springs - Semi Active Dampers - Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
- Top Speed: 126 Mph
- 0 to 60 Mph: 4.8 sec
- 50 to 75 Mph: 3.0 sec
- Cornering 20m: 1.27g
- Cornering 200m: 1.47g
- 1/4 Mile: 13.02 sec
- Roll Angle: 2.9 degrees
- 62 to 0: 29.5 m
- Weight: 765 Kg
For those who has read the details and interested in driving one, be sure to grab yours on this link. Keep in mind that I used some mods on the car so be sure you have all the mods you needed. Also, let me know what are your thoughts on this car and have fun!
Popura Sans - Superkart.car (34.1 KB)
-TheAgathaNakai
XXXIX >1<>1<
As I have stated before, I will release 2 cars, and well you have seen the first one. It’s time for the 2nd one, and this is what you’re waiting for…
“You want a cute and fast car at the same time? No worries, Popura just released this cute little thing that you can enjoy alone behind the wheel. It’s a Superkart after all…”
The car that I just came up with a week ago, and in an instant I decided to release this thing for all of you to enjoy as well. This car came with my Superkart specs in case you wondering, but hey it’s much better to know all the specs, eh?
MODEL
- Model/Trim Year: 2020/2020
- Chassis: Glued Aluminum Monocoque
- Suspension: Double Wishbone (F/R) Double Wishbone
- Engine Placement: Front Longitudinal
- Body Panel: Aluminium
ENGINE
- Family: Lolita i3 1.3L (1300cc)
- Variant: Superkart
- Aspiration: Turbocharged
- Fuel System: Direct Injection - Throttle Per Cylinder - Race
- Headers: Race Tubular
- Power: 177 HP @8600 RPM
- Torque: 170 Nm @7200 RPM
- Fuel Economy: 20.50% - 375.2lb/hph
TRIM
- Body Style: 2-Door Coupe
- Drivetrain: Rear Wheel Drive
- Transmission: 6-Speed Geared LSD Sequential
- Tyres: 225F/245R Semi Slicks
- Undertray: Downforce
- Interior: 1-Seater Basic Interior
- Brakes: 2 Pistons 295mm Vented Disc F/R 1 Piston 295mm Vented Disc
- Suspension: Standard Springs - Semi Active Dampers - Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
- Top Speed: 126 Mph
- 0 to 60 Mph: 4.6 sec
- 50 to 75 Mph: 2.9 sec
- Cornering 20m: 1.32g
- Cornering 200m: 1.45g
- 1/4 Mile: 13.02 sec
- Roll Angle: 2.9 degrees
- 62 to 0: 29.5 m
- Weight: 757 Kg
For those who has read the details and interested in driving one, be sure to grab yours on this link. Keep in mind that I used some mods on the car so be sure you have all the mods you needed. Also, let me know what are your thoughts on this car and have fun!
Popura Lolita - Superkart.car (30.4 KB)
-TheAgathaNakai
XXXIX >1<>1<
14 Years ago today, marks the release of Need For Speed: Most Wanted. We all know the hero car for the game, the BMW M3 GTR. Now I’m bringing this car into Automationverse, in my own interpretation. So here it is:
“Do you remember the time when you were the most wanted by the states, just by driving this alone? The time has come again, and the heat on you will go even higher. The moment you get behind the wheel, the cops will be all after you in an instant.”
I hope you enjoy the ride and have a good day!
Let me introduce you my new series, Special Series. It’s a type of cars I will release, most likely specially customized. Unlike LIMITED EDITIONs, everyone can get the keys of the cars labeled under Special Series, but it’s only available for a limited time. If you want to get your hands on one of these, the car key obtaining system will be similar with LIMITED EDITION series, where the only way to win it is by asking me via DM (unless I made it available again in the near future).
Oh by the way, every single Special Series will have that one paragraph up there explaining the matter, so you know which cars that will be only available in limited time.
To celebrate my friend’s birthday 2 days ago (it’s pretty late but hey better late than never) and tribute to her team, let me present you this car:
Let’s start this all with a story. I entered a digital modification contest held by my campus and NMAA and I won the 2nd place (if you wonder what it is, click me!). If you’ve seen that, I hid an easter egg in the car I made for the contest. The explanation here is pretty simple, the colors you saw at the link are representing 3 things, the first one is my college color scheme, the 2nd one represents my favorite color, and the 3rd (last) one represents my friends as a team named after a color model, CMYK.
In that time, I was thinking if they have a fast ride, for themselves. What are you looking at here right now, is the ride I would imagine, if my friends have a car that can go fast while they all ride in it together at the highways (say they’re a team that just want to go full outlaw on highways while being chased by other racers or cops, at the same time on their way to work on their project).
By the way, the name “Calco Yozia” is a portmanteau of their first/nicknames (Calvin, Marco, Yoga and Kezia). The fact that the color model’s letters are similar with my friends names first letter making it even more interesting, to the point where I started to boot up Automation as soon as I have the vision, and immediately design all the modifications that will take place in a car that I chose based on their interests (and I ended up picking Fidelia because it’s the only Japanese 4-door sports compact sedan I have in my collection), and then visualize all of that into what you just saw and about to see.
If you look at the headlights and taillights, you will notice the CMYK letters are there merging together, creating a unique looking lights in some ways, and also gives them identity of what the purpose of this car is made for. New badges as their logo are also being placed on the front, rear and fuel tank to give it more personal and straight-forward. The wheels and brakes color also applies CMYK colors as well. Without blabbering too much with the visuals, let’s get to the quick specs and see if you’re interested to get one of these:
The 2020 Cellia Fidelia GRS “Calco Yozia” is made as a tribute to all the friends I’ve made this year (especially those four that in some ways influenced my contest creation that leads to victory). Think of it as a trophy for me and them, and maybe to you all, if you enjoy a 4-door, 4-seater sedan with 5-cylinder under the hood that goes fast enough on highways.
Let me introduce you my new series, Special Series. It’s a type of cars I will release, most likely specially customized. Unlike LIMITED EDITIONs, everyone can get the keys of the cars labeled under Special Series, but it’s only available for a limited time. If you want to get your hands on one of these, the car key obtaining system will be similar with LIMITED EDITION series, where the only way to win it is by asking me via DM (unless I made it available again in the near future).
Oh by the way, every single Special Series will have that one paragraph up there explaining the matter, so you know which cars that will be only available in limited time.
