Finally, the time has come for me to release one of my latest models which has been stuck in my mind for years and finally I’m able to visualize it as best as possible. Here it is, 2015 Margaret Abigail REV!
Margaret Abigail REV is a 2-Door, 2+2 seater coupe made by Margaret Automobile.
It is the high-performance trim of the model.
The original idea of the car was to be based on BMW M3, then somehow I changed
it into a mix between Subaru Impreza and Lancer Evo (which I also have made one
in Kee engine). Over the course of time I changed the idea into heavily inspired
from BMW M4. This car is also a tribute to someone I have a crush on, which is
having a birthday today. Also, here’s the quick specs and performance figures!
Quick Specs:
Model and Trim Name: Margaret Abigail REV
Model and Trim Year: 2014/2015
Layout: Front-Engined, Rear Wheel Drive
Engine: MAG631 3.1L Boxer-6, producing 420 HP @7300 RPM and 460 Nm of torque @5000 RPM
Transmission: Margaret REV 6-Speed DCT
Suspension: Progressive Springs - Adaptive Dampers - Active Sway Bars
Tyres: 255F/275R Sports Compound Tyres
Interior: 2+2 Margaret REV Sports seats - REV Premium Infotainment
Driving Assists: ABS, TC, and ESC
Weight : 1615 Kg
MSRP: 48k - 56k (Automation Credits)
Quick Performance Figures (Automation):
Top Speed: 183 Mp/h
0 to 60: 4.2 seconds
50 to 75: 2.5 seconds
Braking 62 to 0: 32 meter
Cornering 20m: 1.17g
Cornering 200m: 1.18g
Roll Angle: 4.6 degrees
Weight Distribution: 53.5F/46.5R
Automation Test Track: 2:10.12
Top Gear Test Track: 1:18.61
Just like usual, I’ll upload the .car files in 24 hours post reveal. Let me know what you think and have a nice day!
This is the first hyper car I ever made in Automation UE4. This time, the quick specs and performance figures won’t be revealed too much. But, here is one thing you can expect: It will reach 400 Km/h on BeamNG Drive, and my first model ever to reach such speed.
It’s a limited edition model by the way, which means I won’t upload the .car file to BeamNG Repository. If you still want to give it a try, *feel free to direct message me for the .car file (which means you will also get the quick specs and performance figures). Have a nice day!
There won’t be too much specs and stuff, but it’s pretty much using high-end race parts for the most. And yes, this is another limited edition car I made based on Abigail REV so if you want the car, feel free to direct message me for the .car file.
So, what are you looking at right now, is my first off-road vehicle, made by Enricord Motors, making it the first Enricord model to be made in UE4. My attempt here is to design a cheap off-road vehicle. This car itself is named after a mountain in Indonesia, which is the Bromo mountain. Here’s the quick specs and the performance figures!
Quick Specs
Model and Trim Name: Enricord Bromo 4x4
Model and Trim Year: 2018/2019
Layout: Front-Engined, 4-Wheel Drive
Engine: 2.0L Turbocharged Inline-4 producing 140 HP @5600 RPM and 220 Nm of Torque @2800 RPM
Transmission: 6-Speed Manual Locker Manual
Suspension: Progressive Springs - Twin Tube Dampers - Off-Road Sway Bars
Tyres: 205F/215R Chunky Off-Road
Interior: 4-Seater - Basic Infotainment
Driving Assists: ABS, TC, and ESC
Weight: 1500 Kg
MSRP: 11k - 13k (Automation credits)
Quick Performance Figures:
Top Speed: 105 Mp/h
0 to 60: 10.5 seconds
50 to 75: 8.6 seconds
Braking 62 to 0: 50.4 meter
Cornering 20m: 0.73g
Cornering 200m: 0.70g
Roll Angle: 7.1 degrees
Weight Distribution: 52F/48R
I will upload the .car files in 24 hours post reveal. This is my first off-road vehicle so there may be some mistakes made. Let me know what you think and have a nice day!
One of the best legendary Pokemon of all time, with my imagination, becomes a track only super-car with serious track capabilities. Comes with 4.5L Twin-Turbo V10 producing 900 HP. Capable to hit the Top Gear Test Track in under 1:06. Interested? This is a limited edition model so PM me if you want one.
The day I’ve been waiting for, Happy Reiko Walker’s Day, everyone!.
For the first car I uploaded as a 22 years old right now, I’d like to share one of my latest model that I’ve wanted to release since a month and half ago, so here it is…
Enricord Saguaro is a 2-Door, 2+2 seater pony car made by Enricord Motors. The 2nd Enricord model to be revisited in Automation UE4. It’s heavily inspired by Ford Mustang and Chevrolet Camaro.
Quick Specs
Model and Trim Name: Enricord Saguaro GT 5.9
Model and Trim Year: 2015/2016
Layout: Front-Engined, Rear Wheel Drive
Engine: 5.9L V8 producing 460 HP @6900 RPM and 570 Nm of Torque @4800 RPM
Transmission: 6-Speed Viscous LSD Manual
Suspension: Standard Springs - Gas Mono Tube Dampers - Semi Active Sway Bars
Tyres: 245F/275R Medium Compound
Interior: 2+2 Seater - Standard Infotainment
Driving Assists: ABS, TC, and ESC
Weight: 1640 Kg
MSRP: 40k - 48k (Automation credits)
Quick Performance Figures:
Top Speed: 185 Mp/h
0 to 60: 4.8 seconds
50 to 75: 2.2 seconds
Braking 62 to 0: 34.5 meter
Cornering 20m: 1.06g
Cornering 200m: 1.06g
Roll Angle: 4.6 degrees
Weight Distribution: 53F/47R
Special for this model alone, I will upload the .car file right away for all of you to enjoy on BeamNG Repository. Once again, happy Reiko Walker’s day!
At long last, I finally get to see my vision in a more beautiful way than before. Here it is, the Porsche 911 straight from my imagination, the 2018 Serena S6 3.8S!
I always wanted to design my very own vision of the new Porsche 911, but slightly more affordable. The Porsche Mission-E was the main inspiration for the headlights and taillights, and with few influences from my designs in that time, this design was born. And the Serena name, in case you don’t know, is named after a character from Pokemon franchise.
Here’s the quick specs and performance figures in case you are wondering:
Quick Specs
Model and Trim Name: Serena S6 3.8S
Model and Trim Year: 2018/2018
Layout: Rear-Engined, Rear Wheel Drive
Engine: 3.8L Boxer-6 producing 340 HP @7000 RPM and 360 Nm of Torque @4800 RPM
Transmission: 6-Speed Geared LSD Manual
Suspension: Standard Springs - Gas Mono Tube Dampers - Active Sway Bars
Tyres: 205F/255R Sports Compound
Interior: 2 Seater - Sporty Interior - Standard Infotainment
Driving Assists: ABS, TC, and ESC
Weight: 1290 Kg
MSRP: 44k - 52k (Automation credits)
Quick Performance Figures:
Top Speed: 176 Mp/h
0 to 60: 4.2 seconds
50 to 75: 2.7 seconds
Braking 62 to 0: 32.1 meter
Cornering 20m: 1.18g
Cornering 200m: 1.19g
Roll Angle: 4.1 degrees
Weight Distribution: 40F/60R
As usual, the .car file will be uploaded 24 hours post reveal. I would like to know what do you think, and I hope you have a nice day!
We all have a childhood, I can assure you that for the most part, it’s either good or bad. There may be some kind of childhood stuff that somehow stuck in your mind for a long time, or just got reminded again. Well, that’s what happened to me.
The thing is, the car you’re seeing now, is a part of my childhood, believe it or not. The story begins about 9 years ago, I was into FnF movies (Tokyo Drift to be exact), later on I had some kind of thoughts about a character named Ecura Inkilla, a young spy that specializes in street racing scene, of some sort. He was tasked to be in a part of high-end tier street racing as an undercover street racer.
The EIRS name is actually a short for Ecura Inkilla’s Racing Specialty, while the design itself is based on my favorite cars back in the day such as Mazda RX-7 Veilside, Nissan Skyline GT-R R34 and Ferrari 550 Maranello. It might be slightly anachronistic, but that’s what my 13-years old’s brain had in that time.
Expect one thing though, high revving twin turbo V8 Flatplane (now you can imagine how this car will sound like) and if you wonder how it performs, it can go from 0 to 60 in 2.6 seconds and reaching top speed over 200 Mp/h (theoretically), and hit the Top Gear test track under 1:12.6 (all those numbers are Automation numbers).
This is not a limited edition model. And the .car file? I will upload it here instead of the BeamNG repository as soon as I have time (most likely tomorrow). Have a good day.
A luxurious British car company based on Rolls-Royce and Bentley, Ainsworth Automobile, made an attempt of realizing their vision of luxury sports car aside from producing luxury sedans.
Just like the previous ones, there won’t be any specs or numbers revealed but expect those things when you get your hands on one of these: It’s being powered under the hood by 7.0L Twin Turbo V12 producing over 750 Horsepower and capable of launching from 0 to 60 mph in 2.6 seconds.
It doesn’t stop there just yet, inside you will be greeted by the luxurious interior and infotainment, so expect being comfortable while you’re speeding.
Just like the previous ones part II, it is not a limited edition model (or more like exclusive if you ask me so I’d refer to some of the limited editions as exclusives from now on). The .car file is now available only on this thread so here you go and I hope you have a nice day!
WARNING: If you don’t like anime or some moe, it’s recommended for you to not continue reading. Reader’s discretion advised.
The Japari Park needs something new, something that will make you capable to cruise Japari Park cheaper and way more fun to meet some “friends”. The Japari Bug exists for a reason, it’s for Japari Park, simple. It’s a perfect car if you want to cruise around Japari Park with your “friends”.
If you watch Kemono Friends and love the show, you will love this thing! You want to know something better? You can even now drive and explore the whole Japari Park with this cute little bug!
There won’t be any specs revealed, but the thing I want to let you know is, you can go almost anywhere at a cheap price. So, how about give this car a try? Once again, have fun!
It is almost a year to celebrate the Automation x BeamNG collaboration, to celebrate the first car to
be uploaded as on this forum. Originally, I want to present this in 18th July, the day Cellia Fidelia GRS was revealed, but I’m going to post it way earlier for one reason. I was reminded that this car is a tribute to my friend which happens to have her birthday on 6th July (yesterday), also this car’s name is named after her last name (and with a little change like I always do, of course). But before you proceed to see the changes, you want to take a look at this post first (in case you have forgotten):
If you have seen it, you may as well proceed.
CHANGES
There are few changes made from the original design of the car. The first change you may notice is the exterior design.
As I have improved my car design skill overtime, I decided to redesign it slightly from the headlight design which now has 3 bars compared to the previous version, and the spoiler has a slight redesign. The front and rear bumpers has also redesigned.
There are changes under the hood as well. This time, the inline engine will take place as the new powerplant for the car, as I find it has more potential than the boxer (especially the power curves and turbo spools way earlier while generating more power with the similar configuration) despite having worse weight distribution. The interior now has equipped with actual sporty interior and have 5 seats (expect this car will be much more expensive than the original at this point since the big update 2 months ago (iirc)).
I’m not a big fan of this particular Pokemon but I find Charmander would look great as a track car (if it was a car). I also originally intended it to be some sort of an affordable track-only car with cute or wacky designs, which I dub it as “Superkart” since I originally intended them to be some kind of go-kart.
Specs and Numbers
MODEL
Model/Trim Year: 2016/2020
Chassis: Aluminum Monocoque
Suspension: MacPherson Strut (F/R) Semi Trailing Arm
Engine Placement: Front Longitudinal
Body Panel: Aluminium
ENGINE
Family: RWD Charmander i4 1.5L (1500cc)
Variant: Superkart
Aspiration: Naturally Aspirated
Fuel System: Direct Injection - Throttle Per Cylinder - Race
Suspension: Standard Springs - Semi Active Dampers - Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
Top Speed: 126 Mph
0 to 60 Mph: 4.6 sec
50 to 75 Mph: 3.0 sec
Cornering 20m: 1.27g
Cornering 200m: 1.47g
1/4 Mile: 13.02 sec
Roll Angle: 3.1 degrees
62 to 0: 29.5 m
Weight: 790 Kg
The Car Key
For those who has read the details and interested in driving one, be sure to grab yours on this link. Also, let me know what are your thoughts on this car and have fun! RWD Hitokage - Superkart.car (30.6 KB)
After so long I haven’t posted anything for almost 3 months, I decided to post again after few months of college and life stuff. So here it is, my very first attempt at creating Cyberpunk inspired vehicle, something I haven’t done before…
I actually have been trying to get the Cyberpunk look I wanted for a long time since the CSR 88, in fact I wanted to join but due to no experience in designing Cyberpunk inspired car, I decided to not join.
It’s my first attempt at applying Cyberpunk/Retrowave/Synthwave visuals so there may be few mistakes. It’s a sports car based on a mix of Lister Storm and Ferrari F40 (main inspiration for the design), with Cyberpunk twist on the exterior design and my self improvisation, of course. Without blabbering too much nonsense, let’s get to the specs and numbers, shall we?
Specs and Numbers
MODEL
Model/Trim Year: 2020/2020
Chassis: Carbon Fibre Monocoque
Suspension: Double Wishbone (F/R)
Engine Placement: Front Longitudinal
Body Panel: Carbon Fibre
ENGINE
Family/Year: 2020 Lentera V8F (3811cc)
Variant/Year: 2020 600-S
Aspiration: Twin Turbo
Fuel System: Direct Injection - Throttle Per Cylinder - Performance
Suspension: Standard Springs - Semi Active Dampers - Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
Top Speed: 210 Mph
0 to 60 Mph: 2.5 sec
50 to 75 Mph: 1.4 sec
Cornering 20m: 1.24g
Cornering 200m: 1.32g
1/4 Mile: 10.3 sec
Roll Angle: 2.4 degrees
62 to 0: 30.8 m
Weight: 1450 Kg
The Car Key
By the way, it’s tanexp Exclusive so you know what that means. 24 hours post reveal, as usual (and there may be changes on the car). UPDATE: It’s here! But don’t forget to install few mods from the workshop to make it work properly (the spoiler and all the lights) before using it.
We’re already at the quarter finale of the year, and Need For Speed Heat is just less than two weeks. It is time for me to reveal one of my latest creation inspired from the game!
I have been fiddling with this car ever since the NFS Heat trailer came out. I’m so excited with the game so far, as if it’s going to be one of the best NFS games (for me at least, well I won’t get my hopes too much either knowing it’s EA).
Khyzyl Saleem’s Polestar in the game is the main inspiration for all the modifications done on the car. Bolt on fenders, hoods, and the big wing. And it’s nothing without what’s hiding under the hood. Still using the original engine, but this time, the car has been tuned up to 900 Horsepower (all race parts by the way), which making the car meant for something that you can use in Palm City. You can simply tell that this car can help making your name way easier at night, and get yourself more bank at the day.
The Car Key
It is LIMITED EDITION. If you want to win the car, DM me on Discord or on this forum
I get where the name comes from - it’s named after the Thermal Club, a real-life raceway in the California desert, not far from Palm Springs, and it would not be out of place there, setting new lap records every time.
To be honest with you, I didn’t know the Thermal club existed (well, I didn’t pay attention too much to the Automotive world). And I named it “Thermal” because it has something to do with the “Heat”.
Just in few days, the majority part of the world will celebrate Halloween, including me. Prepare your best costumes and be ready for the trick or treat.
By the way, all of my cute, wacky, or any car that is inspired/take influence/straight from popular culture stuff (such as Star Wars, Pokemon, etc.), will be branded under the name “Popura”.
In case you wondering, Popura Cars is a division of Reiko Walker Designs, specified for designing cars with styling cues straight from popular culture characters/cars. A mix of fantasy and reality, you can say. Popura is the place where people who wants to have fun and realizing the childhood vision of many by “bRinging uNreal Ideas tO the reality”. The price range of all the models will depend on the car itself and what it is based on. Only in Popura Cars, you will find my cheapest and most expensive creations of mine all time (for the record, the 2018 Margaret Ageratha (LIMITED EDITION MODEL) costs less than a million, somewhere near 500k price range (I made it up btw)). Popura itself is named after one of the WORKING!!! anime characters, Popura Taneshima.
By the way, let’s get to the cars. So far, there are 4 models I’ve made so far:
Koneko (City Car)
Hitokage (Track Car)
Japari Bug (Off-Road)
??? (Hint: Most hated font ever)
??? (Hint: A specific type of drink with cute face)
If anyone can guess the rest of the model that I’m going to release soon (???), will have an early access to all the models, and also have a chance to win my limited edition models. Also, DM me once you know what are those. Oh, while you’re here, you can also enjoy my creations on this thread as well.
The time where everyone wears their favorite costume (most likely something that will scare people or just cute costumes for those who can’t handle all the scare), going out at night and “trick or treat” stuff happened. What are you going to wear for this year’s Halloween?
Without blabbering too much nonsense. Let’s get to the cars for you guys to celebrate. I’ve designed 2 cars for this occasion. But I will reveal the first one.
Sans is currently my favorite character from Undertale (aside with Frisk). With that being said, I decided to design the car based on Sans, with Superkart specs (in case you wondering what it is, just take a look at my Popura Hitokage (RWD Hitokage) for reference.
Specs and Numbers
MODEL
Model/Trim Year: 2020/2020
Chassis: Glued Aluminum Monocoque
Suspension: MacPherson Strut (F/R) Semi Trailing Arm
Engine Placement: Front Longitudinal
Body Panel: Aluminium
ENGINE
Family: Sans i4 1.5L (1500cc)
Variant: Superkart
Aspiration: Naturally Aspirated
Fuel System: Direct Injection - Throttle Per Cylinder - Race
Suspension: Standard Springs - Semi Active Dampers - Active Sway Bars
PERFORMANCE FIGURES (AUTOMATION)
Top Speed: 126 Mph
0 to 60 Mph: 4.8 sec
50 to 75 Mph: 3.0 sec
Cornering 20m: 1.27g
Cornering 200m: 1.47g
1/4 Mile: 13.02 sec
Roll Angle: 2.9 degrees
62 to 0: 29.5 m
Weight: 765 Kg
The Car Key
For those who has read the details and interested in driving one, be sure to grab yours on this link. Keep in mind that I used some mods on the car so be sure you have all the mods you needed. Also, let me know what are your thoughts on this car and have fun!