2020 Donington Historic [ENTRIES CLOSED]

12 hours remain.

Because I don’t want anyone missing out on getting graded, I am missing cars from the following users

@LinkLuke
@jameseydude
@mart1n2005

If car files are not into me before the deadline the cars will not be participating.

Letto Motors is Proud to announce the Entry of the 1970 Letto IS-R for Group 4






1 Like

1996 Daylilly Wildcat GT1 #168

The mid 90’s presented an issue for Daylilly as their factory efforts became split between the GT1 Wildcats and the Group A rally Wildcats, both rolled into the same homologation special road-legal sports car. The GT1 version, however, is the ultimate Wildcat, producing more than twice the power of the rally car and, in this high downforce spec, enough grip to compete with the mid engine GT1s in the corners. The 4.6L DOHC V10 produced 620 hp, more than enough even with the added drag to propel the car past 200 mph.

The car in this spec was highly criticized for exacerbating the already escalating arms race that would lead to the prototype years of 1997 and 1998 in attempts to compete with the Porsches on pace. The car would be entirely redesigned in 1998 as a full mid engine prototype on the expectation that the category would continue as it had in the past, only to be modified for LMGTP after the end of the season.

Unfortunately, after being taken out of storage in 2018, it was discovered that the original lexan windshield had been caved in and warped beyond repair from nearly 20 years of repeated heat cycles and a large box of spares that had slid off of the roof of the car in storage. A new windshield and sunstrip, now bearing the Daylilly Historics name were produced and fitted to the car in order to present it to the public once again.

7 Likes

1988 Kaizen VSCs AWD Group A #66 Mikon

Imgur

Context

In 1985, the 8th generation Kaizen SC luxury executive car was released. Naturally, the VSC high performance version was entered into various competitions, including Group A touring car racing. In 1988, a technical update was issued, adding variable valve timing to the intake cam. For the Group A version, a race modified version of the production AAV series 3.6L naturally aspirated inline 6 generated 367 hp and 279 lbft of torque, channeled to a race modified production spec 5 speed manual transmission with all wheel drive, housed in an widened body. Better known for sticking closer to production cars than competitors, the VSC mainly banked on its reliability and AWD traction, being slightly underpowered and overweight. This is the #66 car fielded by the Kaizen Victoria factory racing team and sponsored by Mikon, driven by then rising stars Nico Schmitz and Brady Gibbs.

Some pictures

8 Likes

My two entries:

For the CSC Category

MAHG Ksi Spéciale

Coming straight from the factory, this has then been modified by a local MAHG dealer ( hence the 72 number refering to LE MANS’ department number) to compete in the '59 Edition! Its body matches its country since it is Racing Blue!

For the Endurance 60’s

MAHG Omega Spéciale

Built for racing from scratch, this car wears the colour scheme of the Ksi to pay hommage to the first car racing on LE MANS from MAHG. This time it has a 2 tone body. They found out that the fourgonette (truckette) body improved top speed so they went for it! The V12 has been re-engineered and got mechanical FI top extract more power!

Halcón Automotive Industries pulls up to Donington Park with a full array of four of their race cars from over the years. The team is careful while unpacking them.

Competition Sports Car: 1957 Halcón Especial


The Especial was constructed over a period of two years from 1955 to the start 1957 by the two founders of Halcón Automotive Industries before the company was officially established. Their goal was to create a car that could compete in the local World Sports Car rounds in Spain, as well as the regional Mille Miglia. Focusing on the space frame construction of the vehicle, the two brothers purchased engines from various manufacturers, often engines that had already been used in a few different rallies or races that the team no longer trusted to stay in one piece. Most notably, this included using a three litre engine made by an Italian motorsports team, which the two brothers rebuilt and modified to fit their car better. This car represents the first generation of a limited number of Halcón built machinery. It's far from the most successful car in classic sports car racing, but it represented the two brothers' intent to create a recognizable sports car brand.


Group 5: 1982 Halcón Salvaje Azure


The Halcón Salvaje Azure comes from the base model Halcón Salvaje produced from 1980 to 1986. Its V6 in the front was replaced with a larger racing block V6 with twin turbos allowing the car to safely push to 640 HP. The miniature wheelbase of the Salvaje Azure made the car aerodynamically unstable at high speeds, but various iterations up to the 1982 Season helped to improve the situation for the drivers with a full floor and rear overhang to better harness the air moving around the car. The car continued to race in the IMSA GTO category for a few years after the fall of Group 5, with limited success.


Group C: 1987 Halcón HR87-GC


The Halcón Racing prototype of 1987 marked twenty years of the company having the Spanish based petroleum company, Gasól, as their main sponsor. Thanks to the racing development team of Halcón taking on various new aerodynamic designers during this period, the HR87 proved to be a formidable chassis in the right hands, powered by a bespoke small block V8 with twin turbochargers. The chassis found success at circuits such as Paul Ricard and Jerez. However, with the evolution of Group C moving quickly into the new decade, the HR87 chassis couldn’t keep up, and wound up being replaced by another prototype chassis before it ever saw its first win.


Group A: 1989 Halcón Petricor


Petrichor is usually used to describe the smell of rain on dry soil after a long drought, and for many Halcón consumers, that is what this new super saloon represented. Built at the tail end of the 80’s, the sedan was designed to be the company’s first journey into high performance saloons, a market segment they had often neglected, using smaller sensible sedans as their primary revenue stream to fund their motorsports endeavors. Putting an updated, naturally aspirated small block V8 into the car with information they learned from the HR87, they quickly found a potent and handsome package that enthusiasts ate up. The main drawback was that the complex valvetrain led to more frequent service intervals, even leading to a recall of over 20,000 Petricors for oil pump failure. Despite the drama with the road car, the Halcón Petricor found itself in the Group A touring car category against the very best, still sponsored by Gasól.

1989 Halcón Petricor Road Car (Carrera)


7 Likes

1957 Yorvik T-5 and 1962 Yorvik T-8

Yorvik are bringing 2 of their historic race cars, the T-5 and the T-8, to Donington for this event. Despite cars from the company capable of using numerous engines to succeed on track, both use the same Bramble 6 engine, yet compete in different eras, and indeed, in different classes.

1957 Yorvik T-5

The Yorvik T-5 is the larger of the two – it’s 2.4 litre (well, 2.45 if we’re being pedantic) engine powers the aluminium clad spaceframe chassis to nearly 150mph, while the all independent suspension leads the T-5 to corner just as well as it looks. 150 mph isn’t too impressive for a sportscar, but that wasn’t why the Yorvik was so successful. Instead, it relied on reliability, and a massive fuel tank – so big that the rear window had to be reduced in height to allow it to fit! With these two advantages, the T-5 would never take a win on any of the fast, speed dependent courses, but would instead excel on the endurance events that frequently took place in the fast fifties.

1962 Yorvik T-8

The Yorvik T-8 is the little brother, and has a little story of it’s own. Rumour has it that just 60 days before the 1952 Le Mans, Yorvik accepted the money to produce a car for the 2 litre and under class for Luigi Salamanca, a Spanish Businessman who had shown interest in sponsoring Yorvik if the car was a success. What Yorvik had not told Mr. Salamanca was that they had no car even in development to run in the 2-litre class! So they simply grabbed a Bramble 6, (which was now incredibly reliable, having been ran in competitions for half a decade by Yorvik at this point) destroked and sleeved the bores as required, then rammed it into a near-standard GT car they’d been prototyping for nearly 4 years!

This explains the T-8’s anachronistic style, including painted over indicators, and the bumper mounting holes used as extra cooling. Astonishingly, the T-8 did work remarkably well – it lasted 22 hours before the stock suspension gave up the ghost – not bad for a car called throughout the factory as ‘the bag of spares’!

More Photos




5 Likes

2 HOURS REMAIN


Missing car files from a few people.

@LinkLuke
@jameseydude
@mart1n2005
@Alib

Don’t delay and please make sure your naming is correct, I’ve already had to drop 2 cars due to failing to comply to naming.

5 Likes

Zac Attack: Donington Historic 2020

An unmarked Thanos tractor-trailer arrives in the parking lot with a massive trailer. The door opens slowly, yet deliberately, as crossplane chugging, flat-six burbling, and flatplane whirring escape the chamber. Then come four cars, emerging one by one as the leader, a smooth copper sculpture, searches for some open spaces.

These cars, you may ask? Keep reading to find out…

1967 Zacspeed 875

image

In 1960, Silver-York released the Basillina. A clear success, with crowds of people clamoring to see one, owners of the car were plenty satisfied with what they got. Soon enough, however, letters came in inquiring about the luxury brand building a more performance-oriented version of the Basillina, perhaps one they could take racing. Zacspeed, at the time, was a performance company entering its eighth year in existence, and it was high time they expanded their range beyond flat-sixes of varying sizes.

Thus, in that same year, Silver-York and Zacspeed engaged in a partnership: the former would provide V8 engines to the latter, and the latter would provide performance services to the former’s varying products. These engines found their way into plenty of applications, though through the early half of the 60s, an itch manifested itself, one that could only be relieved by competing at the highest level in the World Sportscar Championship.

Unable to resist, the 875 was greenlit on January 3, 1964, though the one displayed at Donington this year is from 1967. In its fourth guise, the 875 features an experimental Silver-York 427 rumored to be put together in 97 days. This all-aluminum engine saw its pushrod head replaced with a two-valve, single-overhead-cam solution, and its Weber carburetors replaced with a drag car’s mechanical fuel injection system, then tweaked for endurance.

Affectionately called the “Bird of Prey,” this mad scientist’s project made 457 HP at 5,400 RPM and 480 lb-ft at 3,900 RPM. To fit this evolution, new fiberglass bodywork was installed - its mirrors integrated into the front fenders clearly indicate this commitment to refining how air flowed over and through the car. The tried-and-true four-speed manual appears again here, helping the 0.364-Cd vessel reach a maximum velocity of 212 MPH. Pairing its light weight - 1,108 kilograms - with 345-section rear tires ensured this car could tackle corners with confidence.

Dan Miles and Ace Barrett were tasked by the factory Zacspeed Racing team with keeping this #2 car under control. A copper-and-black blur on the track, it proved the team learned from prior attempts and were ready to apply newer technologies to challenge its opposition. This lead to strong results in several rounds, proving itself a formidable opponent in the endurance racing world at the time.

So impressed was Ace with the car’s performance that he requested a development chassis for himself. In 1970, while Zacspeed furthered its sportscar ambitions with the 408, Ace founded Sirius Aeromotive with three other people. Using the chassis as a basis for his own automotive experiments, including a custom wedge-shaped shell, he often brought his son, Rex, along to help engineer his cars. In 1971, however, he lost control of his test car at speeds approaching 200 MPH and passed away shortly after.

1978 Zacspeed ONE 5

The aforementioned 408 would continue racing in the WSC until 1971, with 1972 mandating teams use engines of at most 3.0L displacement due to Group 6 regulations being used. A successor, the 248, would be employed to do battle in this new fifth group, but the old car would continue to find success in Can-Am. There, it rapidly evolved into a fire-breathing, power-chucking, turbo-whistling hellspawn infamously labeled “Turbohammer.” Even its drivers would sweat beads at the sight of it.

408/7B "Turbohammer"

Meanwhile, the Zacspeed I entered its second generation in 1965. Rebranded as the ONE, it maintained the same rear-engine, rear-wheel drive layout, though the engine range used larger flat-sixes. As time progressed, technologies from these race cars, such as five-speed manual transmissions and mechanical fuel injection, trickled down into various upgrades. Turbocharging entering the range was inevitable.

Group 5 was shaken up again in 1976 with the “Special Production Car” category, and that was where all hell broke loose. This Falcon-sponsored car is not one of those first-year entries, but rather a more extreme science project. A water-cooled, twin-turbocharged, 3.2L flat-six now sat in the rear, and even more extreme bodywork was employed. No punches were pulled in its high-downforce design, including a rear end laying bare the turbochargers the engine was connected to.

Taking advantage of an overly rich fuel mixture, the engine pulsed out 645 HP at 7,400 RPM and 481 lb-ft at 6,400 RPM, and its turbo lag is a far cry from modern cars’ near-immediate response. Despite the absurd amounts of downforce this Group 7-derived fiberglass kit produced, the 3.2 was enough to manage 190 MPH on the longest straights in its cornering configuration, aided in part by a full undertray and 380-section rear tires. Such was its fearsome speed that just like the other blue turbo car, it received its own nickname - “Peregrine.”

This bird of prey’s two handlers? Derek Bellof and Johann Strommlen. In their sturdy hands, the #38 car’s silhouette was imprinted in opponents’ minds. Those hands needed to be sturdy, too, as it was often the case that the chassis would twist from this much power. Bellof, who later partook in many of Zacspeed Racing’s Group C antics, went on record declaring the ONE 5 as “the most delirious car” he ever drove. In one interview, Strommlen, a former 248 driver, described how it was “easier to drive at 130 MPH than it was at 30 MPH.”

Despite their complaints, it turned in many a solid result, often vying for outright victory. This specific ONE 5’s engine would serve as a template for race cars, including Group C’s 536. Naturally, the technologies innovated here eventually propogated through the entire road car lineup.

1993 Bradford-Zacspeed Ax-1 Apache

Eventually, Group 5 would be dissolved; in its place, Group C rose to prominence. Such prominence, in fact, that in 1991, its original, endurance-focused ruleset was replaced with one favoring F1-powered cars. Previous cars like the 442 and 536 were sandbagged with 100kg and banned outright the following year. Privateers scrambled with Group C2’s obliteration. Car counts were halved. Zacspeed Racing, with its crown-jewel endurance car in the crosshairs, was faced with a choice: adapt or face obliteration.

At a recent auto show, Bradford Designs showcased an open-top concept that drew many stares - some smiling, some grimacing. Nevertheless, Jerome Lee Stanner’s design attracted plenty of attention, enough to convince track engineer Rupert Hose into networking with Stanner. Explaining the situation, Stanner met with the team shortly after; to prepare a car in time for the first race, both companies would work together to crunch-build and refine the Ax-1 for the 1991 and 1992 seasons.

With 1993 on the horizon, plus how race distances were cut in half due to how much less reliable the engines were, it was clear to both teams that the championship now prioritized speed over endurance. In this newfound pursuit of grip, it was decided to co-develop that year’s Group C car with its Formula 1 car - the FZ93C. The open-topped alternate concept was modified with bodywork from the closed-top car, but more louvers were added to the front fenders. This was possible because of the radically-revised front end, aping the F1 car’s nose and front wing.

The 3500cc V8 heart, developed from the closed-top car, stayed, churning out nearly 570 HP, while weight sat around 875 kilograms. While its vmax did suffer from how downforce was fortified, this was part of the team’s strategy as well; with chicanes breaking Mulsanne into thirds, the car would already reach a slower top speed in one of those sections. 186 MPH was thought to be a fine compromise, allowing drivers to make the most of the radical body and its 350-section rear tires, not to mention the traction control, anti-lock brakes, and active suspension components from the FZ93C.

So closely-developed were the two open-topped cars that they even shared a driver - Alexandre Frost, who participated under the condition his F1 races would receive priority. Drivers Jack Hoff and Shige Ai - both from 1991 and 1992’s World Sportscar Championships - return. With three racing veterans, #22 was more than prepared to clench the championship.

Tragedy would strike, however, as the championship that year was cancelled. Despite this, Group C cars were allowed to race at Le Mans that year. With the week after Canada vacant, Frost was in the clear. Despite this variant lacking race experience, it brought the fight to the front grid. This interpretation of the new rules not only succeeded in terms of engineering, but it also ended up spawning a design that was ahead of its time. Within the next decade, Le Mans Prototypes would utilize multiple aerodynamic concepts experimented with here, including Zacspeed’s own P2K.

1994 Sirius-Zacspeed WR-GT2

There to watch his father’s development and accident, Rex Barrett refused to let his efforts fade to dust. Inheriting Sirius, he and the other three started from a new chassis - a safer, lighter monocoque design - and fabricated wedge bodywork borrowing from his father’s design. Throw in a twin-turbocharged V8 of 4.5L, and the end result is 1979’s BX-1. Toured in various states of development, Rex’s first tasks were to acquire funds and employees.

With Sirius being the brightest star in the night sky, he only found it fitting for the company to shine brightest above all others, an American symbol of self-made success all could look up to. Eventually, the ball got rolling to building the BX-2 - Sirius’s first production car - and a successor - the BR-3 - which was the first Sirius to gain a cult following. With the WR-2, Rex wanted to tick off another box: building the first Sirius to go racing. Aware of how slowly his cars sold and how much they cost, Rex knew exactly who to contact.

Zacspeed set straight to work. When the car raced in IMSA GTO from 1992 to 1994, Group C2’s Zacspeed 375 proved central to the engine’s development. That car had a 3.0L V8, and to make matters simpler, the WR-2’s 4.1L V8 was destroked to just under 3.0L. Once packing over 700 horsepower, a different set of turbochargers were used, bringing power to just about 650 horses. It was still capable of revving beyond 9000 RPM (9500 RPM in this guise), though due to this engine’s unorthodox design, the crankshaft utilized a cross-plane design. Thus, its two exhausts dumped a most unnatural warble as it whooshed about.

Its design attracted plenty of attention as well, with IMSA GTO providing plenty of opportunities for the team to refine its aerodynamics. The idea was to ensure it looked and acted like no other car on the field - that way, people could immediately recognize it. In an era where curvier cars came to cleave the air, this car would batter it into its will. Thus, it would rise to prominence in IMSA while attracting plenty of passerby at the 1994 New York International Auto Show. Features in series like Racing Ambition would immortalize its unconventional design.

Present here is that exact one from the auto show, #32. With no factory teams present in the 1994 season, rather than being campaigned by Zacspeed Racing, Rex formed his own privateer team, Rexsport, to field it. Several drivers sat in it, including IMSA GTO driver Jacques Lafayette, IMSA GTP driver Baba Bouille, Alexandre Frost, Derek Bellof, and F1/DTM driver JJ Leno. For 1999, an all-new set of drivers would be brought onboard, leading to all three current drivers’ names being scraped off the rear pillars. Rex’s ambitions were cut short, however, when his company entered financial turmoil, leaving Sirius Aeromotive (and, by extension, Rexsport) to shut their doors.

Seeing widespread use among privateers, Zacspeed offered many upgrades to keep these cars toward the front pack. Even the factory team would campaign their own car in 1995 and 1996. In 1997, with Revello expressing interest to build a GT1 variant of their Monza supercar, Zacspeed Racing moved on from one wedge spaceship to another. Both provided vital experience for Zacspeed to release their own exploit in 1998, one so advanced it was relegated to prototype racing the year before the new millennium…

The fuel tank is the trunk.

14 Likes

ENTRIES ARE CLOSED


If you didn’t get a car in in time, I am sorry. I’ll get the confirmed entries done tomorrow night, as it is late and I have work tomorrow.

Lore posts are still allowed if you have not made one, but car files are no longer being accepted.

1 Like

Tanaka Proudly Displays 2 Race Cars for the 2020 Donington Historic

We are very proud of our racing heritage. We race cars starting from the first few years of the company with the 1st generation Tanaka Aventis rally car. However, these 2 cars come from the 80s, arguably Tanaka’s golden era. We will be presenting 2 cars.


Tanaka Courser Super Silhouette (Group 5)



This is the Tanaka Courser Super Silhouette for Group 5. Tanaka participated the FIA Group 5 Series with the Courser Super Silhouette from 1980 until 1983. This race car was made to further take away Tanaka’s bland and boring image and also to boost sales of Tanaka vehicles, particularly the Courser. However there was another reason why they decided to make this race car. Tanaka have been participating in FIA races that is filled with regulations. This time, they wanted freedom. The budget was unlimited and they could finally make their dream race car. With Tanaka’s increasing sales success around the world, this timing was perfect. A special engine was made for this car. Using the same design as the ET-Series I6 engines powering the normal Courser, the ETR race car engine is bored and stroked down to 2.5 litres to save weight and it makes 588HP and 414lb-ft of torque.



But make no mistake, this is not a Courser with a body kit at all. No, the only thing that is the same from the normal Courser to this one is only the roof. The monocoque chassis, bodywork and other components are absolutely new. The powerful engine combined with the superb traction and downforce makes this a beast at its time. This exact one, the #30 car driven by :jp: Nobuhiko Takashima and :de: Mark Heizel, has raced from the 1980 to 1982 season.





It is 1986 and the Japanese economic bubble began. Japan become richer and Tanaka has exploded (not literally lol, but in an economic way) and what do you do? Make a race car of course. Tanaka have been looking into the FIA Group C at that time and wanted a part of it. So, with their unlimited budget, the team started working on the project. It made its debut at the 1988 24 hour of Le Mans and its called the Tanaka GCR-1. For the GCR-1, they focused on reliability. However, it is still very powerful with a 4.5 litre twin-turbo V12 producing 623HP and 604lb-ft of torque and has a top speed of 204mph (apparently the Courser Super Silhouette has a higher top speed than this. So much drag! Either that body has very little drag or this body has too much drag.) and it can accelerate from 0-60mph in 3.4 seconds. This number #09 car is the low downforce version and it raced from 1988 to 1989. It is driven by :fr: Martin Caron and :jp: Akira Saitama. The GCR-1 was later replaced by the GCR-2 for the 1991 season.

10 Likes

1966 Tristella Aquila A400 Spyder

#41

Created shortly after the company’s official founding with the books full of investor money, the Aquila is Tristella’s first official racing car, running in the 60s in the WSCC. Made very much to gain publicity, only a very few were ever made. This one in particular was the only spyder model, having ran during the 1966 season. With over 400 HP and under 1000 kilos, this was a of course, a very quick car for the time.

Additional Images

12 Likes

Home from work, can do this now.

Entries From Users


We have entries from

@Falling_Comet
@z2bbgr
@vero94773
@Aaron.W
@donutsnail
@ThatCarMadGamer
@Reizei
@MrChips
@S31
@Xepy
@chiefzach2018 & @Metric-Miura
@chiefzach2018 & @yurimacs
@chiefzach2018
@Fabelhaftigkeit
@Simmer22
@66mazda
@LordLetto
@Alib
@Jaimz
@ZoomZoomer32
@V4guy
@Chickenbiscuit (Dealing with mod issues rn)
@Petakabras
@Executive

Not sure on a definite guideline on when results will come, but I will do them Class-by-class from oldest to newest, hopefully the first will come before the end of the week, but I cannot be certain.

10 Likes

DISQUALIFICATIONS


Here’s something fun. I have 3 cars that failed to comply with the rules in one way or another.

MAHG Omega Speciale 60

By @S31

Historic Event Society Eligibility Group

Vehicle in question: MAHG Omega Speciale 60

Faults: Class Sign-up failure

Result: Vehicle Barred from Event.

Note: Somehow they thought they could sneak this boy into the paddock without the proper credentials. We noticed the car when it was missing it’s class info tag. Poor bastards.

Unfortunately, the naming scheme was incorrect, and did not include the class, therefore it has been disqualified.


MAHG Ksi Speciale

by @S31

Historic Event Society Eligibility Group

Vehicle in question: MAHG Ksi Speciale

Faults: Class Sign-up failure

Result: Vehicle Barred from Event.

Note: I think it might just be these MAHG guys, actually. Their other car also tried to sneak it’s way into the paddock. Caught these guys too, seeing as the car was missing the info tag, too.

Same reason as above, missing the class in the naming, therefore it’s a disqualification, rules are rules.


Daylilly Wildcat GT1 High Downforce

by @Fabelhaftigkeit

Historic Event Society Eligibility Group

Vehicle in question: Daylilly Wildcat GT1 High Downforce

Faults: Illegal modification to power steering system

Result: Disqualification from competition

Note: The Scrutineers were quite sad about this one, it looked so good, and they wanted to see it out on track, but when the car was pulled from storage someone must’ve not looked at the power steering they were installing properly.

I hate to be binning this car, but unfortunately it used Variable Ratio power steering when it was a banned component. Rules are rules, and the car unfortunately will not be partaking in the GT1 class.


NEXT UP, CSC, EVENTUALLY.

9 Likes

DJ_Khaled_Suffering_from_Success
god i’m stupid lol. rules are rules tho and i’m not mad i just feel like a dumbass for that

6 Likes

I did everything in a rush :sweat_smile:

I misread the name conventions so i guess I’ll wait for next time :smile::rofl:

2 Likes

am i missing something or were there a lot of entries to go through

1 Like

Fuck, appologies.

I’ve been really struggling with my mental health for the past month or so, so I’ve found it hard to pull together motivation to work on the challenge. I’ll see where I am in the next few weeks, but my mental hasn’t been the greatest.

11 Likes

Take your time man, thanks for letting us know. Try to enjoy doing what you’re doing in the meantime, and take care of yourself.

3 Likes

I forgot to even send my car file, been kinda busy the last month with finishing work, moving back to uni and of course a flight sim that may have released, that totally doesn’t kill my cpu…

3 Likes