The 2016 Automation Rally Championship draws near. Many companies have already had their cars homologated without knowing the rules of the championship.
Now the AIRA (Automation International Racing Association) has revealed some rules, and are letting companies and teams scrutinize and comment on the rules, and change them if need be.
Link to part one: viewtopic.php?f=39&t=8953
I will make note of part one quite often.
Now, On to the rules:
Body:
Same as part One
Engine:
Limited Production parts are allowed (Race Parts)
Reliability over 50
loudness under 75
Trim:
Gearbox: Either Manual or Sequential
Tires: No Semi-Slick or Chunky OffRoad, Quality must be +2.
Suspension: Any Set-up, but ride height must be higher than half way up the slider
Aero: One Wing, Two Lips Max. Lips must be lower than the top of the wheels, wing must either be above the rear window (Hatch/Wagon) or on the boot/trunk (Sedans) No Active Wings, or Cooling Flaps.
Interior: Race (Basic), No Entertainment, Advanced Safety Required.
General:
Base Model must be Homologated. Must score over 75 in part one’s scoring, or have been entered in Part 1.
Power:weight must be no higher than 0.3hp:kg
All Workshop Mods are allowed.
Max Cost of $45,000. (May be reduced.)
Min Weight of 1200kg
Name Scheme for ingame:
Model: ARC - {Your Name} - [Car Name]
Homologation Trim: {Trim Name} HOM
Race Trim: {Trim Name} RACE
Engine: ARC - {Your Name} - [Engine Name]
Homologation Var: {Var Name} HOM
Race Var: {Var Name} RACE
(IF YOU ARE USING THE SAME VEHICLE FROM PART ONE, JUST FOLLOW THE TRIM NAME SCHEMES)
Tracks are to be made by either me, or some-one kind enough to make them for me (Or Teach me. I have no Clue how to.)
Entries to be open about 3 days after the reviews for part 1 are done.
