1996 wabhubac [fini]

Awildgermanappears · 28 February 2016 15:20

The year is 1996, and LaVache is very satisfied with the sales of their 1994 Ramjet. To cash in on the surprise popularity, we have decided that we also want to sell a coupe based on the Ramjet platform and drivetrain. Unfortunately our production lines are already struggling to cope with the demand, and we are still slightly broke from the development of the Ramjet. This is why we’d like to (or rather need to) outsource the design and production of the still-to-be-named Ramjet Coupe to someone else.

Because of this we have decided to run a Competition in order to find a contractor that can take care of the design and production process. We will send every applicant one of the pre-production Ramjets in our warehouses, because a) we can finally get rid of them and b) so the applicants can take them apart, study its design, capture the essence of it and build a prototype of their design on the rolling chassis.

What we are looking for:
We’d like to keep a family resemblance between the cars, your prototype must be instantly recognizeable as a member of the Ramjet family (aka inspired by Aviation), but also embrace the fact that it was the result of a cooperation between your company and our company.
If you want to shorten the chassis for the design, we have no problem with that. But please don’t modify the engine and gearbox, yes? Our current reliability record is very good and we want to keep it that way. The End Product should also be affordable to make.
A good name is key to the wallet of the buyer.

Limitations:
-Tech year 1996
-2 door bodies only, no convertibles
-Must use corrosion resistant Steel Ladder Chassis, Panel material is open
-Double Wishbone suspension at the front, Semi trailing arm at the rear
-FR Drivetrain, 4-speed automatic transmission
-Must use a variant of this engine:
LaVache 6V50T3.zip (175 KB)
-The pre-production car you can use for studying our design language:
LaVache Ramjet '94.zip (218 KB)

Send your prototypes to me via PM.
Naming scheme:
LaVache-[your company] (Model)
[whatever name you come up with] Prototype (Trim)

What we’ll be judging:
Design, obviously, Our favourite design is going to be produced. But we’ll also present all entries at an autoshow and do a voting on the crowd favourite.
We’re american, handling is of secondary concern, comfort and straight line speed matter.

I probably didn’t phrase that very well, but you can use any body you want as long as you can make it comply with the rules.

Deadline: Sunday, March 13

Entries:

lordvader1 (LaVache-LVC ARPUS Prototype)
TR8R (LaVache-First Order Jetstar Prototype)
thecarlover (LaVache-Solo Scramjet Lux Prototype)
CadillacDave (LaVache-Bell Brecon Prototype)
DeusExMackia (LaVache-Erin Volanti Prototype)
dspgt (LaVache-STF TauroJet Prototype)
koolkei (LaVache-Komodo LandCorde Prototype)
marcus817 (LaVache-Motoyama Hotrocket Prototype)

Not competing, only eligible for public voting:

Myself (LaVache Blitzwing Concept)

koolkei · 28 February 2016 15:50

so we basically design everything that is not mechanical?
right?

and do we Have to use the prototype, or is it just an example?
if it’s just an example, i’m suggesting to also putting a picture of the car on the OP. (and the gearing config)

Awildgermanappears · 28 February 2016 16:38

“The Prototype” is just your design. The other car is for studying our design language (necessary to keep a family connection) and provides a rolling chassis you can build your prototype on (this is basically a paraphrase of the rule set).

This is how it should be geared, if it helps:
i1155.photobucket.com/albums/p549/MightyMultipla/Unbenannt_zpsehjmsoaa.jpg

DeusExMackia · 28 February 2016 17:20

This looks like an interesting competition. When’s the entry deadline?

Awildgermanappears · 28 February 2016 17:52

Let’s say in three weeks, shall we?

thecarlover · 28 February 2016 19:21

So the transmission has to be at 298 and 65, nothing else?

Edit: I can’t even get 298, just 294 and 302.

Awildgermanappears · 28 February 2016 19:53

[quote=“thecarlover”]So the transmission has to be at 298 and 65, nothing else?

Edit: I can’t even get 298, just 294 and 302.[/quote]

I may be german, but I’m not that anal. Between 295 and 305 is accurate enough.

lordvader1 · 29 February 2016 10:12

i will do my best

RobtheFiend · 29 February 2016 11:23

Ladder chassis in -96? Only vehicles using that in -96 would be pickups or pickup based SUV’s.
Not even americans use ladder chassis in normal (new) cars at that point.

CadillacDave · 29 February 2016 12:28

[quote=“RobtheFiend”]Ladder chassis in -96? Only vehicles using that in -96 would be pickups or pickup based SUV’s.
Not even americans use ladder chassis in normal (new) cars at that point.[/quote]

Weren’t Ford using the ladder chassis on the Panther platform?

Madrias · 29 February 2016 12:42

[quote=“RobtheFiend”]Ladder chassis in -96? Only vehicles using that in -96 would be pickups or pickup based SUV’s.
Not even americans use ladder chassis in normal (new) cars at that point.[/quote]

I thought the Ford Crown Victoria was ladder chassis right up until it was discontinued, which was some time in the late 00’s or early 10’s, if I remember correctly.

Awildgermanappears · 29 February 2016 13:14

[quote=“RobtheFiend”]Ladder chassis in -96? Only vehicles using that in -96 would be pickups or pickup based SUV’s.
Not even americans use ladder chassis in normal (new) cars at that point.[/quote]

Cars using a seperate chassis are more common than you’d think.

Awildgermanappears · 29 February 2016 13:15

[quote=“Madrias”]

[quote=“RobtheFiend”]Ladder chassis in -96? Only vehicles using that in -96 would be pickups or pickup based SUV’s.
Not even americans use ladder chassis in normal (new) cars at that point.[/quote]

I thought the Ford Crown Victoria was ladder chassis right up until it was discontinued, which was some time in the late 00’s or early 10’s, if I remember correctly.[/quote]

lordvader1 · 29 February 2016 14:06

LVC (lordvader company) took the contract to make the coupe. so what we did it, we took one of the productions cars. we separated the chassis from the body. next thing we did is we sold the body for 5$, then we cut the chassis. to make the newly designed body fit on it. so after fitting the same headlights, taillights, trims, blinkers on it. we bolt together the chassis and our new body. the engine and gearbox is unmodified

Jaimz · 29 February 2016 21:46

First Order Automotive would like to present the LaVache-First Order Jetstar prototype, codenamed FN-2199.

We decided to mock up a new chassis and coupe bosy to house the 375hp LaVache 6V50T3-A50T.

Awildgermanappears · 29 February 2016 21:50

Mmmmm… Jetstar. Nice Name.
Do you also intent on sending the Prototype back to us so we can further examine it?

Jaimz · 29 February 2016 22:14

I thought it had already gone. Apologies it’s on route now.

Awildgermanappears · 29 February 2016 23:54

Only because we’re not competing, that doesn’t mean we can’t present our own design, does it?
Therefore we’d like to introduce you to the LaVache Blitzwing RT5 Turbo Concept. Yes, like all entries so far it has the Turbo V6.

Spitfire599 · 1 March 2016 17:34

Are you purposely naming all your cars after Decepticons?

Awildgermanappears · 1 March 2016 19:42

I was wondering how long it’d take somebody to figure it out. I tried making it a little less obvious by sticking to the lesser known G1 Transformers, but most G1 Autobots have terrible names so Decepticons it is. Tell me, when exactly did it occur to you?