AED sport coupe design challenge

Sharing Car Design Sharing Forum
1

Here’s my challenge, that is a bit different from others.

This is our latest creation - B6Z30 Sport Prototype engine

b6z30_by_xaxphoto-d7vses6.png1259×202 209 KB

Your job is to make a chassi that will hold the engine.

It must be track-day ready and have enough comfort to get you to the track and back without breaking your back

Restrictions are as follows:

  1. No changes to the engine
  2. RWD only
  3. top speed limited to 280km/h
  4. 0-100 ~4 seconds

No more applications after 22.08.2014
B6Z30SPRev0.lua (53.7 KB)

2

I’m on it … by the looks of it with that speed limit you expect the cars to have lots of downforce…

3

Not Technically a “Coupe” per se, but close enough to work. Here’s my Valiant AED.

Read Out.PNG1045×740 389 KB


Capture.PNG1152×843 949 KB

4

VosNox please add the readout from Automation test track

performance stats and lap time

5

Is there any way to put that specific engine into the body with the current open beta build?

6

This body is in the current build.

I upped the top speed to the actual limit you set. Here’s the info you wanted for the track and proof that this engine is in the body.

Capture.PNG1333×881 1.15 MB

7

That was not the question. I was asking whether there was any way of choosing an engine you made before rather than making a new one for each new car?

8

Oops sorry. While in the trim section, click on the gearbox tab and all the way to the left is the “choose engine” box. Click there and select your engine.

9

oh. So apparently i’m just blind. But thank you anyway :slight_smile:
Here’s my entry. The suspension is not as sharp as it could be, because that makes it more comfortable. Also, it’s equipped with Premium interior, advanced safety and standard entertainment, all that for a better weight distribution and again, more comfort. Given the capabilities of this car, i think 34.0 comfort is actually quite okay
http://i57.tinypic.com/2uhl2ck.png http://i57.tinypic.com/wmgh12.png

2sb1frt.jpg1280×720 294 KB

wbow09.jpg1280×720 221 KB

w0qptu.jpg842×161 36.5 KB

10

last chance to get into the challenge!

11

there… just in time
X-30 - Rev0.lua (87.9 KB)

12

i just gotta give this win to The Tom with AMWs design, hits all the right spots at once

thanks for participating guys :sunglasses:

13

Thank you! :slight_smile: I’m content to have won this challenge, however i got to admit that there weren’t a lot of participants so there wasn’t much competition.

14

btw, could you remake it under the current release?

i’ll feature it on AED page and would love to manufacture the chassi when it’s possible to do so :unamused:

15

I can just send you the file, there’s no need to rebuild it. It works perfectly in the current build.
AED TheTom - Rev0.lua (105 KB)