Auto-Beam Drag Event (closed results out now)

No real money its just for the ad I’m a broke dude **

A semi quick challenge I’m sure most of you have a car almost ready already.

This is the E100 shoot out!
1/4 mile Street car event.

For 2020 were showcasing the power of our new E100 fuel so bring you cars out and fuel is on us all day!

In typical street car events were doing a winner take all 20K prize the final four will be doing arm drop battles to the line.

(for lore, I’m not doing BEAMP just for a arm drop guy haha)

Rules

Weight 2400 LBS min 3000 LBS Max (1089KG- 1361KG)
trim year 2020 (All years welcome, but trim must be 2020)
Fuel E 100 only
No CVT
Wheel base 2.2 - 3.2 (85’ - 126’)

Tyres are measured per tyre**
FWD 305-55 R15 max
RWD 305-55 R15 max
AWD 225-45 R15 max
Semi Slick tyres only (Road legal)
(if rims are bigger or smaller I’ll check them at 15 for ratio)
Budget 55K
2020 Advanced safety required
1 Race seat required
5L max for forced induction 9L max for NA (302 CI - 549 CI)
Horsepower 850-1000 (@flywheel in engine tab not at transmission) Max Torque 1250 FTLBS
N20 cars can be used if anyone wants that 250 max shot so 500-650HP cap. (not a typo it, offset for the potential launch bonus)
10% Engine stress Max (PD excluded for displacement range as the game doesn’t love big HP small engines)
No Race parts and must have 1 muffler (Obviously the Race Seat doesn’t count for this)
Standard tech
No negative quality
Total positive points 15 (combined so +15 to one or +1 to 15 IDC)
Cars must be street legal
No ATS or TCS/LCS
No active aero
No cheat builds (idk of exploits but please play the challenge correctly)
No downforce limit
No Pushrod suspension

Happy hunting!

BTS

I’ll be running and recording the cars times will be based on the average of 3 passes in game.

I will try to have all the results up by the end of 2025 (less cars of course means faster turn around)

I use Xbox controller, I’m not a great driver but I can hold my own.

Open Now - Closes December 1st

I mean work with me and ill try to get you through the gates

Name format: E100 (username)

**Al-RIMA Build

** Moving forward tweaks will be added here and given a 3 day protest before being set in stone.

.car DM to me**

N20 is experimental and if during testing it shows to be a mistake on my part ill make N20 cars in their own section (I’ll show all car times with foot notes)

No interior required

Automation specs aren’t going to change results, its a race event based on times in BEAMNG

(sorry for confusion I’m still a noob to this and my events in 2026 will have a proper deliberation period)

USD?

Is that traction/launch control (for the submitted trim)?

What does this mean?

Yes

In beamNG you can add nitrous to the cars.

that was for the back drop and not a real prize, i added a note. if i had money to spare i would def offer prize money :sweat_smile:
Sorry for the potential moment of false hope

Are the tyre sizes the total size or per wheel?
You say “road legal”, is that fixture wise? what about WES?

How and what file are we submitting to you, there’s mentions of using N2O which is fine, but if that can only be applied in beam how can that be measured against automation cars?

A few translations to other figures might be nice, eg the weight minimum and maximums being in KGs as well.

Looks good overall though.

1 Like

Do I need to make an interior?

Can you show us the specs in IS units? Specially weigth and power

doesn’t Automation have a dedicated drag tyre compound?

Will update specs soon.
Tyre size is each yes, road legal is meant to be for fixtures, no wes requirement (well go southern us on the legality), the .car to prevent tampering, the N20 ads power to base engine power not a ratio boost (so 250 shot is just 250HP)

@breadtheloaf not required but feel free if you want to make one
@David_Herrera ill be updating the units in soon.

@Yewnos100 Yes but street legal cars have to have tread (Semi slicks have cute small area irl to bypass this for legal road use)

inspirations? im thinking of sum 60s - 80s extreme muscle car based on the description but its not really clear to me.

2 Likes

I did that on purpose. muscle cars, imports, maybe even a KIA :rofl:

ah, well you could clarify that you wont judge realism then lol

maybe just say no full meme cars, or not, idk

1 Like

The 2020 Comanche Redhawk 200 series

More Photos



The 200 series is a special street legal drag racing variant of the Redhawk, this one is painted in an exclusive Red Arrows themed livery. It weighs 1345kg (2965Ib), makes 998hp and 911nm of torque from a 5000cc supercharged V10. It has a top speed of 449km/h and can accelerate from 0-100km/h in just 2.3 seconds. It has AWD, ABS, and can rev to 9000rpm. Our testing has revealed a theoretical quarter mile time of just 9.01 seconds

2 Likes

The Crawford Racing Team has caught wind of upcoming E-100 shootout and have been busy working on their new project car. With the help of their sponsor HossTech they managed to cook something up.

Photos

Behold, an extensively modified 91’ Kingmoto Valoria SS-400 built for the strip. Making 988hp and 700lb-ft of torque using a built version of its original 4.9L V8 motor going to a 4 speed AMT. It is RWD with strut suspension in the front and a rear solid axle. It’s also been fitted with a full drag pack, utilizing skinnies up front (165/90R15) along with fat semi slicks in the rear (305/55R15).

Background/Lore Yapfest

Motor

The Valoria SS-400 originally made 419 HP out of a S/C 4.9L fully cast iron push-rod V8 (L81). Surprisingly this build still uses the same motor that came in the car. Crawford Racing has extensively modified the motor, namely fitting on a HossTech injection conversion kit to get rid of it’s outdated single point EFI. The injection conversion also gives it brand new performance aluminum heads, replacing the restrictive cast iron OEM ones. The original centrifugal supercharger was removed in favor of a 3.5L screw supercharger. It retains its factory cast iron block but with a slight +99cc bore bringing it up to 4.996L, the internals are fully built to handle the boost reliably. All these modifications managed to bring this geezer of a motor to 988hp@8200 with 700lb-ft@6100, all being transferred to the wheels by a HossTech 4 speed auto-manual drag transmission.

4 Likes


1992 Zephorus Canyon “Banana”
By Zephorus Racing Design


Modified to the limits this car modified by the Zephorus Racing Department is far from the original. Carbon fibre panels and a huge compound turbo make this more of a rocket ship than a car.

997hp and 1693Nm come from the 5.0L Pushrod V8 straight to the rear wheels through a 3 speed auto.


These cars are not a real product of any manufacturer, any likeness or other similarities to real brands is purely coincidence. Actual model may change in final submission.

4 Likes

final day for subs
@GoblessHoss
@breadtheloaf
have completed entries
@Riley has an ad but no .car at this time.
Hope you all had a good thanksgiving / harvest festival / a good week in general.

Results are in. @GoblessHoss @breadtheloaf @Riley all got a podium position!

GoblessHoss - automation times 10.73 1/4 0-100 3.78
8.654 avg beam time.
You may have came in third, but by far had the biggest time difference of time from auto-beam. You also had the most consistent time with only .022 between your fastest and slowest time.

Bracket racer award goes to you.

Breadtheloaf

Breadtheloaf - auto time 9.01 1/4 0-100 2.31
8.545 avg beam time

second place with a solid performance and a car that doesn’t care if diff locks are on or off, hard launch or soft launch it just digs and pulls the whole track! .081 between fastest and slowest time.

You earned the Middle child award!

And The fastest time goes to Riley!

Riley - Auto times 9.69s 1/4 0-100km 3.15
8.511 avg Beam times

Your midship car was sketch and didn’t like staying flat, but it was just fast enough to secure the win despite having the widest time gap of .430 over the three runs.

Congratulations and much thanks to all parties involved.

It was fun seeing how all three cars where so different but less than .2 second time between them.

(would have wrapped this up sooner but I upgraded my GPU and my PSU got jealous and needed to be replaced)

4 Likes