with or without chicanes?
Here is my Prototyp for this challange:
WPC Attakka S
And this is the engine WPCZA34ZZ. It’s a 3.4l V8 N/A with a lot of HP and reliability of 57 
Blue model, yellow model, green one… ok… tomorrow my. I reserve then Red colour so it will be clear.
I have 2 x 2.0 Turbo Engine which I think is hardest to do. I will test them and then pick one of another 2 my 3.4 engines.
Body is already done.
Reliability of zero is already achived. As I understand, 10 Tech Pts. are total that I can use to all my parts of engine. And another 15 total to spend on each other part.
With chicanes, of course 
Just a reminder that the submission deadline is tomorrow! (Technically @ 3:00 PM EST, but I won’t be a hardass about that 
)
A few of you had some DQ’s in your designs, make sure you read the PMs I sent so you can revise and get qualified to race! 
Last minute entries are always welcome 
Thx for moving one day. Thats always good for begginers.
Can you post names of others Circuits so I could pick a correct revision of engine?
How did you do that… I was trying to put that engine into body and I get all the time error.
I also built a turbo version with 100hp more, but the driveability is worse than the NA.
Stunning looking car necronassassin
[quote=“Lucdeluc”]
Thx for moving one day. Thats always good for begginers.
Can you post names of others Circuits so I could pick a correct revision of engine?
How did you do that… I was trying to put that engine into body and I get all the time error.[/quote]
That was posted on Thursday… so the deadline is today 
Just make sure you car is submitted by the end of the day (Eastern Standard Time; for reference I’m posting this @ 12:30 noon)
I’m at school right now so any last-minute qualifiers won’t be added to the thread list until later.
Ok… I’ll post it soon as I am finishing work.
[quote=“Lucdeluc”]
Thx for moving one day. Thats always good for begginers.
Can you post names of others Circuits so I could pick a correct revision of engine?
How did you do that… I was trying to put that engine into body and I get all the time error.[/quote]
I kept the engine bore/stroke relationship square (or extremely close to it) and a 2L inline six slots in nicely (At least on my install copy,lol)
I cannot get any Turbo engines to work without Lua errors so I’ll be DNF’ing anyway! 
I made like you said… almost squre broke/stroke and still getting “:350:” error. There is problem with exhoust I think and dont know how to fix it. I even made shorter engine then “75.1/75.2” balance so for sure it fit to the car. There is elsewhere problem.
RaduST:
LucDesign 3.4L V8 Red Monster: 536 HP (9000RPM), 451 Nm (7600RPM)
but I think next one will be a little surprise
LucDesing 2.0L Turbo V8 Red Draco: 519 HP (8300RPM), 536 Nm (6100RPM) - why so low you ask? couse that engine took best results on test track. (that one was 7-8 sec. faster than others revision of 640-720 HP engines)
Hm… Interesting. I know that my 2.0T is ~7 seconds faster around La Sarthe than my 3.4, but i didn’t try a low output turbo, so you may be on to something. I did try to develop a turbo unit with a reasonably wide power band. Anyway, am not currently at my gaming pc, so I’ll just have to wait for the results and see.
All my tests I done on Automation Basic Test Track so I dont know how it works on other tracks.
2.0 V8 Turbo 519 HP: 2:15,40
3.4 V8 ------- 537 HP: 2:12,89
All my tests with V8 Turbo engines of power around 700 HP finished with results from 2:17 to 2:22. Last one tested today done 2:17 but with reduced HP power to 640 HP or something like that.
Its my first that kind of competition so…
The results are in! (Well, not quite yet)
A few cars ran into some C++ errors when told that they had to run around La Sarthe. Hopefully I can get everything resolved soon and final results should be posted first thing tomorrow 
So far the times are quite interesting 
More to come soon!
After information from applepi66 some cars or only my are bugged on that map couse of rear wing and attachments. Removing them will stop the problems but cars will be a little slower - so, few tracks would need “app” to remove some body parts.
Tracks are: Circuit de la Sarthe, Green Hell, Daytona Sports Course. Those are identified. Just for working cars - remove some body parts. 
Here are the final results for Circuit de la Sarthe
N/A
4:10.78 RaduST - Gemina XIII
4:15.86 Lucdeluc - LucDesign Red Monster
4:23.22 Weasel - WPC Attakka S
4:26.86 HighOctaneLove - Bogliq Shelob
4:27.02 VicVictory - Ardent Torpedo Prototype
4:33.96 necroassasin - Necronia Pyrhos
Turbo
4:2.45 RaduST - Gemina XIII GTS
4:9.02 Lothoren - Escapade
4:17.89 Lucdeluc - LucDesign Red Dragon
4:28.46 VicVictory - Harpoon Prototype
Grand Bracket (Top 4 Overall)
RaduST - Gemina XIII GTS
Lothoren - Escapade
RaduST - Gemina XIII
Lucdeluc - LucDesign Red Monster
Wow… 13Sec. slower… this is quite a lot 
thought my car would faster