[Engine Request] BMW M60B30

Someone on here already did it, but was unable to post it. Is there anyone else that has recreated this engine/anyone that can? I would like to know what settings they used.

paul_wms - BMW M60.zip (74 KB)Hi, here is my attempt at this engine. I used information that was available on the internet. The only discrepancy is the torque. Whereas the real engine produces 215 hp and 214 ft/lb of torque I can replicate the power but the torque is down at 188 ft/lb.

M60B30 1992 - 96
Aluminium block/head. DOHC. 32v VCT Forged rods Cast crank

Bore 84mm Stroke 67.6mm Compression 10.5:1 RPM 6500 215 hp 214 ft/lb

M60B40 1992 -96
Aluminium block/head. DOHC VCT ?Billet crank

Bore 89mm Stroke 80mm Compression 10.0:1 RPM 6500 282 bhp 295 ft/lb

I haven’t tried to replicate the B40 but these are the figures you’ll need if you want to have a go. Unfortunately the 80mm stroke is slightly too much different to the 67.6mm of the B30 for the game to accommodate. The closest match is around 79.6mm.

I hope this is ok for you. :smiley:

[quote=“MadamVastra”][attachment=0]paul_wms - BMW M60.zip[/attachment]Hi, here is my attempt at this engine. I used information that was available on the internet. The only discrepancy is the torque. Whereas the real engine produces 215 hp and 214 ft/lb of torque I can replicate the power but the torque is down at 188 ft/lb.

M60B30 1992 - 96
Aluminium block/head. DOHC. 32v VCT Forged rods Cast crank

Bore 84mm Stroke 67.6mm Compression 10.5:1 RPM 6500 215 hp 214 ft/lb

M60B40 1992 -96
Aluminium block/head. DOHC VCT ?Billet crank

Bore 89mm Stroke 80mm Compression 10.0:1 RPM 6500 282 bhp 295 ft/lb

I haven’t tried to replicate the B40 but these are the figures you’ll need if you want to have a go. Unfortunately the 80mm stroke is slightly too much different to the 67.6mm of the B30 for the game to accommodate. The closest match is around 79.6mm.

I hope this is ok for you. :smiley:[/quote]

I tried doing it myself, but couldn’t get it just right. Thank for the files!