Really really nice track. It’s my new favourite testing track for cars.
Btw. Where did you get all the data from?
I used AIW data (driving line for AI cars) from an rFactor track mod and plotted the 3d driving line in MATLAB. From there I built the track as close as possible to that. So it should be somewhat accurate although the corner radii seem to be a bit too small at some locations.
Here is my Green Hell run. It is with my Z50di Coupe using an SCCA DI 302 SBC motor.
I got nearly the same result with the Z66di Coupe which has a DI 400 SBC motor. 
Anyone noticed how hard it is to get below 8 minutes?
Seat and Renault both have 2.0L turbocharged cars that can crack it.
I used a 400hp mid-engined car with some downforce and sport tyres and stil got barely below 8’30’’.
1 Like
[quote=“ThomasD1962”]Anyone noticed how hard it is to get below 8 minutes?
Seat and Renault both have 2.0L turbocharged cars that can crack it.
I used a 400hp mid-engined car with some downforce and sport tyres and stil got barely below 8’30’’.[/quote]
This is mostly down to the simulation, rather than the track itself.
Small things like the AI being rather “timid” around some of the high speed corners, and the fact that the AI takes corners at a constant speed has a massive effect at the end of the long lap.
1 Like
Gave it a whack with ‘Sport’ SUV (well, as close as one could get with current body styles). It was nothing outrageous either. However, I’d say it did pretty decently @ 8 min 46 sec.
Basic stats:
6 sp Manual AWD, Front Longitudal 3.4L NA Inline 6
Aluminum Block/Header, Sport Intake, 2.75 inch Tubular Exhaust w/Straight-through Mufflers and High-flow Cat.
Regular Octane Pump Gas
291 hp @ 7500 RPM
244 ft-lb @ 4800 RPM
Double-wishbone Suspension Front/Rear
300 mm Brakes/4 piston calipers (Default 50 brake setting)
AHS Steel Frame, Aluminum Body, Monocoque assembly
~1440 kg
6.2 L/100km Economy
http://files.maos.ca/index.php/core/preview.png?file=%2Fpublic%2Fat2.png&x=1600&y=763&a=true&scalingup=0
http://files.maos.ca/index.php/core/preview.png?file=%2Fpublic%2Fat1.png&x=1600&y=763&a=true&scalingup=0
AUDIE RA 8 Extreme Total Time 487.84 Grenn Hell
The Audie RA8 Extreme has 730 hp and a top speed of 378.6 Km.Aus safety of cars was reduced to that speed , although a much higher top speed would be possible . The car was produced from February 2010 for a period of time . After 1500 global Exenplare production in late 2012 was eingestellt.Der sales figure stood at 650,000 euros .
Please fix the coding or the map, after the 1st sector the car model drives off-track with an offset to the right (from your perspective) untill the main straight has been completed for about 30%.
Don’t hold your breath, this track was made 5 years ago by someone who isn’t very active anymore.
Awww 
this for automation or beam and if for automation how do we install it
tracks on the forum are for automation lap test mode
and what is that when its at home?
It’s the test lap, in automation. Same when it’s not home.
can you explain what that is and all that please? also , how to import the sodding thing because im not sure how.
1 Like
It means tracks on the forum are for automation lap test mode.
if only there was a search function on the forums that could allow us to find such important info…
source: How to build Custom Tracks
Go to my documents/Automation/Tracks and put (or unzip) the track folder there.
If you do not find Tracks folder, create one with that name. So, for the green hell you should have something like documents/Automation/Tracks/Green Hell and inside at least two files, a png and a .lua file.
Run automation, and in the lap test mode, you will find a drop down menu where you can select custom tracks that have been previously downloaded and placed in the previous described folder (see above).
If you’re already running automation when you place the custom track in the folder, close and re-open automation so the new custom track appears in the list.
2 Likes
Thanks ! I tried searching for info but nothing came up for me… idk weather it was just my conputer not displaying properly but i didnt see the thing you quoted when searching , thanks for the info again
plz tell me how to access lap test mode because im dumb?