UE4 Open Beta Body + Variant Issues list

fixed, ready for future release


these new lights in beta look neat but dont work correctly
the body is cutting into the fixture

EDIT: This is just a MOD body issue

Ladder chassis is poking out from the 2003 pickup body as you can see here.

Hello, i found some sort of problem on the Alfa 155 body when you fit a boxer engine into the car. This problem also occur on the 190E body

The 1955 Coupe with the 2.63 wheel base has the frame sticking through the body.


large 10’s roadster has a hole here, no fixtures on the car

This has been known for quite some time, but both of the following bodies appear to have their engine compartments placed too far forward in transverse configuration:

In both cases, the result of this unfavorable weight distribution is strong understeer (especially with strut front suspension); moreover, the rear axles can only accommodate narrow tires, especially with a torsion beam rear end. Both of these issues combined actually make them less suitable for building high-performance hot hatches than the 1987 Colt body, for example.

10sHiVan has an odd kink on the front door. The cargo and pick-up variants have been removed from the game since the last patch.

09’ 3.1m coupe. Morphs are… slightly off

3 Likes

1985 2.5m Coupé, as shown in screenshot: MacPherson suspensions tops go through the hood when it’s morphed below a certain height.

Also, with struts up front, the front track is too wide, to the point that large flared arches are a necessity when fitting wider tires.

Isn’t fixed by messing with morphs or changing from sedan to wagon or vice versa

Not sure if this has already been reported yet, but this body and all its variants could use a check on its exhaust pipe.

1 Like

Absolutely, it basically scrapes on the ground even though it was perfectly fine just a while back

Not sure if this counts as a body issue or not, but the “pillar” paint slot is labelled as “body secondary”

1 Like

When stretching the rear cabin/roof morph backward, the roof gets strangely distorted the further back the morph goes. This issue is not present on the similar variant with the headlight cutouts.

Edit: This body also has a second row of seats available, not sure where those would go :stuck_out_tongue:

Also, it has an abnormally high drag coefficient - a body this sleek does not deserve the aerodynamics of a barn door.

1 Like

I know previously this kind of body would’ve been called “sedans” and all, but the type of body affects the market, and having this classified as sedan reduces the score it gets from certain markets, even though it has the same amount of doors as other bodies.


Having a similar issue with the 1985 sport coupe above, when front longitudinal monocoque + McPhersons are used.

Body is 10sSport_Cor_coupe

The body type tag doesn’t actually affect markets, it’s entirely based on the stats you get in the end. The only exception to that is those flagged as a hard or soft top convertible, which will affect stats and some market values.