133S10
Production years: 1965 through 19??
Shared specs:
- Bore: 77.1mm
- Stroke: 71.5mm
- Displacement: 1000cc
Cars used in:
C2U (1965-1975)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 7.6:1
- Naturally aspirated
- Two barrel carb
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in: 1965-1975 Plebia 102S
184S16
Production years: 1965 through 19??
Shared specs:
- Direct acting SOHC Inline 4, cast iron block, cast iron head
- Bore: 78.7mm
- Stroke: 82.2mm
- Displacement: 1599cc
Cars used in:
- 1960-1974 Foreia Mk2
- 1965-1975 Mesaia Mk2
- 1974-19?? Foreia Mk3
- 1975-19?? Mesaia Mk3
Ce2U (1965-1975)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Twin single barrel eco carb
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1965-1974 Mk2 Foreia 162
- 1965-1975 Mk2 Mesaia 162L
Ce2UE (1974-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1974-19?? Mk3 Foreia 1.6 BL
- 1975-19?? Mk3 Mesaia 1.6 GL
DCU (1965-1972)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.4:1
- Naturally aspirated
- Twin DCOE carb
- 6700rpm redline
- Unleaded 91
- Tubular exhaust header
- Two baffled mufflers
Used in:
- 1965-1972 Mk2 Mesaia 164S
ME (1978-19??)
Specs:
- Internals: cast crank, cast rods, hypereutectic cast pistons
- Compression ratio: 8.3:1
- Naturally aspirated
- Mechanical fuel injection, single throttle body
- 6900rpm redline
- Unleaded 91
- Tubular exhaust header
- One straight through and one reverse flow muffler
Used in:
ME-US (1978-19??)
Specs:
- Internals: cast crank, cast rods, hypereutectic cast pistons
- Compression ratio: 7.2:1
- Naturally aspirated
- Mechanical fuel injection, single throttle body
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- One straight through and one reverse flow muffler
Used in:
- 1978-19?? Mk3 Mesaia 1.6 CLI US
Mpi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.1:1
- Naturally aspirated
- Multipoint EFI
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
184S18
Production years: 1965 through 19??
Shared specs:
- Direct acting SOHC Inline 4, cast iron block, cast iron head
- Bore: 84.2mm
- Stroke: 82.2mm
- Displacement: 1831cc
Cars used in:
- 1960-1974 Foreia Mk2
- 1974-19?? Foreia Mk3
- 1976-19?? Ochlosia Mk1
Ce2U (1965-1974)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 6.9:1
- Naturally aspirated
- Twin single barrel eco carb
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1965-1974 Mk2 Foreia 182M
Ce2UE (1974-1983)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1974-1982 Mk3 Foreia 1.8 GL
*1976-1983 Mk1 Ochlosia 1.8 Van
ME (1978-1982)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.5:1
- Naturally aspirated
- Mechanical fuel injection, single throttle body
- 6400rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1978-19?? Mk3 Foreia 1.8 GL Injection
Mpi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.2:1
- Naturally aspirated
- Multipoint fuel injection, single throttle body
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
236S21
Production years: 1965 through 1974
Shared specs:
- Direct acting SOHC Inline 6, cast iron block, cast iron head
- Bore: 73.6mm
- Stroke: 82mm
- Displacement: 2093cc
Cars used in:
Ce3U (1965-1974)
Specs:
- Internals: Cast crank, Cast rods, Cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Triple single barrel eco carb
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1965-1974 Mk2 Foreia 213L
236S23
Production years: 1965 through 19??
Shared specs:
- Direct acting SOHC Inline 6, cast iron block, cast iron head
- Bore: 73.6mm
- Stroke: 90.8mm
- Displacement: 2318cc
Cars used in:
- 1960-1974 Foreia Mk2
- 1974-19?? Klinos Mk1
- 1978-19?? Coupe / Tetra
DCU (1965-1972)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 7.8:1
- Naturally aspirated
- Twin DCOE carbs
- 6200rpm redline
- Unleaded 91
- Tubular exhaust header
- One reverse flow and one baffled mufflers
Used in:
- 1965-1972 Mk2 Foreia 234S
Ce3-US (1972-1974)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Triple single barrel eco carb
- 5700rpm redline
- Unleaded 91
- Short cast exhaust header
- One reverse flow muffler
Used in:
- 1972-1974 Mk2 Foreia 233L (US export)
ME (1978-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.6:1
- Naturally aspirated
- Mechanical fuel injection with single throttle body
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- One baffled and one reverse flow mufflers
Used in:
- 1978-19?? Mk1 Klinos GLSi
- 1978-19?? Mk1 Coupe CS
MTE (1978-19??)
Specs:
- Internals: Cast crank, Heavy duty forged rods, Hypereutectic cast pistons
- Compression ratio: 6.0:1
- Single, journal bearing turbo @ 0.76bar
- Mechanical fuel injection with single throttle body
- 5900rpm redline
- Unleaded 91
- Short cast exhaust header
- One baffled and one reverse flow mufflers
Used in:
- 1978-19?? Mk1 Klinos Excellence
- 1978-19?? Mk1 Coupe Turbo
MT (1981-1984)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 6.0:1
- Single, ball bearing turbo @ 1.03bar
- Mechanical fuel injection with single throttle body
- 6600rpm redline
- Unleaded 91
- Short cast exhaust header
- One straight through and one reverse flow mufflers
Used in:
- 1981-1984 Coupe Tetra evo 1
MpiT (1982-1984)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 7.0:1
- Single, ball bearing turbo @ 1.03bar
- Multipoint EFI with single throttle body
- 6700rpm redline
- Unleaded 95
- Short cast exhaust header
- One straight through and one reverse flow mufflers
Used in:
- 1982-1984 Coupe Tetra evo 2
1 Like
236S22
(destroked 236S23, necessary to fit hypereutectic cast pistons on 1974 tech and still get a decent redline)
Production years: 1974 through 19??
Shared specs:
- Direct acting SOHC Inline 6, cast iron block, cast iron head
- Bore: 73.6mm
- Stroke: 84.9mm
- Displacement: 2167cc
Cars used in:
- 1974-19?? Klinos Mk1
- 1976-19?? Ochlosia
Ce3UE (1974-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Triple single barrel eco carbs
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1974-19?? Mk1 Klinos GLS
- 1976-19?? Ochlosia Camper
123P9
Production years: 1975 through 1985
Shared specs:
- Pushrod inline 3, cast iron block, cast iron head
- Bore: 69mm
- Stroke: 80.2mm
- Displacement: 899cc
Cars used in:
CeUE (1975-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 5800rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
133S11
Production years: 1975 through 19??
Shared specs:
- Direct acting SOHC inline 3, cast iron block, cast iron head
- Bore: 81mm
- Stroke: 71.5mm
- Displacement: 1105cc
Cars used in:
- 1975-19?? Mk3 Mesaia
- 1955-1985 Mk2 Plebia
- 1985-19?? Mk1 Dima
CeUE (1975-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.0:1
- Naturally aspirated
- Single barrel eco carb
- 6400rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1975-1982 Mk3 Mesaia 1.1 BL
- 1975-1985
Spi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.3:1
- Naturally aspirated
- Single point EFI
- 6400rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1982-19?? Mk3 Mesaia 1.1 BLi
- 1985-19?? Mk1 Dima 1.1 CL
184S13
Production years: 1975 through 19??
Shared specs:
- Direct acting SOHC inline 4, cast iron block, cast iron head
- Bore: 75.8mm
- Stroke: 72.1mm
- Displacement: 1300cc
Cars used in:
Ce2UE (1975-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.1:1
- Naturally aspirated
- Twin single barrel eco carb
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1975-19?? Mk3 Mesaia 1.3 CL
Mpi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.9:1
- Naturally aspirated
- Multipoint fuel injection
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1982-19?? Mk3 Mesaia 1.3 CLi
133S13
Production years: 1978 through 1996
Shared specs:
- Direct acting SOHC inline 3, cast iron block, cast iron head
- Bore: 81mm
- Stroke: 84.1mm
- Displacement: 1300cc
Cars used in:
- 1955-1985 Mk2 Plebia
- 1975-19?? Mk3 Mesaia
- 1985-19?? Mk1 Dima
Spi (1978-1985)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.4:1
- Naturally aspirated
- Throttle body fuel injection
- 6300rpm redline
- Unleaded 91
- Tubular exhaust header
- One straight through, one reverse flow mufflers
Used in:
Spi-US (1978-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 7.4:1
- Naturally aspirated
- Throttle body fuel injection
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- One straight through, one reverse flow mufflers
Used in:
Mpi (1985-1991)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.2:1
- Naturally aspirated
- Multipoint fuel injection
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1985-1991 Mk1 Dima 1.3GL / Dimatic 1.3 CL/GL
Mpi Euro 1 (1991-1996)
Specs:
- Internals: Cast crank, Cast rods, low friction cast pistons
- Compression ratio: 8.0:1
- Naturally aspirated
- Multipoint fuel injection
- 6300rpm redline
- Unleaded 91
- Short cast exhaust header
- Catalytic converter + Two reverse flow mufflers
Used in:
- 1991-1996 Mk3 Mesaia 1.3 BL
FAAL Senior Legal Compliance Management - Intellectual Property - internal communication to FAAL Communication Head of Department
Dear colleague,
In relation to your recent communication regarding the FAAL engines, the legal department wishes to notify you that a product cannot both be a non-registered trademark, indicated by ™, as well as a registrered trademark, indicated by ® .
I also wish to stress that this indication or registration is only valid in the US. Individual registrations should be filed in individual nations or regions, perhaps beginning with enregistrement de marque in France. A Community Trade Mark/EU Trade mark is available from at the latest 1994.
Kind regards,
Legal-IP
That’s quite an impressive list of cheap, easy-to-build engines you’ve got there - unpretentious, not too complex and just enough power for the cars in which they are installed. But the engine for your upcoming Group B homologation special is unlikely to be any of those things…
Looks at my incoming Group B homologation special
…
y-yeah… no frills… and easy to build… yeah! Exactly! hehe! heh…
1 Like
255R21
Production years: 1983 through ???
Shared specs:
- SOHC 4V Inline 5, cast iron block, aluminium head
- Bore: 85mm
- Stroke: 75.5mm
- Displacement: 2141cc
Cars used in:
- 1978-19?? Coupe
- 1982-1992 Mk4 Foreia
- 1982-19?? Mk2 Klinos
- 1988-1999 Mk2 Ochlosia
- 1990-19?? Mk3 Klinos
- 1992-19?? Mk5 Foreia
Mpi (1983-1992)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 8.4:1
- Naturally aspirated
- Multipoint EFI
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1983-1992 Foreia mk4 2.1 GLi / GLi Tetra
- 1983-1985 Coupe 2.1CS
MpiTE (1983-1993)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.0:1
- Single ball bearing turbo @0.72bar
- Multipoint EFI
- 6800rpm redline
- Unleaded 91
- Short cast exhaust header
- One straight through, one reverse flow mufflers
Used in:
- 1983-19?? Klinos Excellence
- 1983-19?? Coupe 2.1 Turbo
- 1988-1993 Ochlosia 2.1 Turbo
MpiT (1983-1988)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.0:1
- Single ball bearing turbo @1.05bar
- Multipoint EFI with ITBs
- 7100rpm redline
- Unleaded 95
- Short cast exhaust header
- One straight through, one reverse flow muffler
Used in:
- 1983-1988 Coupe TETRA Evo III
MpiT2 (1983-1984)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.0:1
- Single ball bearing turbo @1.34bar
- Multipoint EFI with ITBs
- 7300rpm redline
- Unleaded 95
- Short cast exhaust header
- One reverse flow muffler
Used in:
- 1983-1984 Coupe TETRA “Tour De Corse” 'Group B homologation special)
MpiTR (F1) (1984-1988)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.4:1
- Single ball bearing turbo @2.11bar (no wastegate)
- Multipoint EFI with ITBs
- 7800rpm redline
- Unleaded 95
- Short cast exhaust header
- No mufflers
Used in:
- 1984-1985 Coupe Tetra Group B rallye car (ver. 1)
- 1988 Foreia Trans-Am race car
MpiTR (F2) (1985-1986)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.8:1
- Single ball bearing turbo @2.6bar
- Multipoint EFI with ITBs
- 9100rpm redline
- Unleaded 98
- Short cast exhaust header
- No mufflers
Used in:
- 1985-1986 Coupe Tetra Evo 4
disregard the ET/PU, how was I supposed to get more HP outta this :'(
MpiT3 (1988-1988)
Specs:
- Internals: Forged crank, Heavy duty forged rods, Forged pistons
- Compression ratio: 8.0:1
- Single ball bearing turbo @1.05bar
- Multipoint EFI with ITBs and VVT
- 7200rpm redline
- Unleaded 95
- Short cast exhaust header
- One reverse flow muffler
Used in:
Mpi Euro 1 (1991-19??)
Specs:
- Internals: cast crank, cast rods, low friction cast pistons
- Compression ratio: 8.6:1
- Naturally aspirated
- Multipoint EFI with VVT
- 6900rpm redline
- Unleaded 91
- Short cast exhaust header
- Catalytic converter and two reverse flow mufflers
Used in:
- 1991-19?? Mk3 Klinos 2.1 GL
- 1992-19?? Mk5 Foreia 2.1 GL
MpiT Euro 1 (1990-19??)
Specs:
- Internals: cast crank, cast rods, forged pistons
- Compression ratio: 7.5:1
- Single ball bearing turbo @ 0.767 bar
- Multipoint EFI with VVT
- 6800rpm redline
- Unleaded 91
- Short cast exhaust header
- Catalytic converter and one straight through, one reverse flow muffler
Used in:
- 1991-19?? Mk3 Klinos GLS Turbo
- 1992-19?? Mk5 Foreia Coupe Turbo
2 Likes
255R25
Production years: 1982 through ???
Shared specs:
- SOHC 4V Inline 5, cast iron block, aluminium head
- Bore: 85.2mm
- Stroke: 87.6mm
- Displacement: 2497cc
Cars used in:
- 1978-1988 Coupe
- 1982-1992 Mk4 Foreia
- 1982-1990 Mk2 Klinos
- 1988-1999 Mk2 Ochlosia
- 1990-19?? Mk3 Klinos
Mpi (1982-19??)
Specs:
- Internals: Cast crank, Cast rods, Hypereutectic cast pistons
- Compression ratio: 8.4:1
- Naturally aspirated
- Multipoint EFI
- 6200rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1982-1992 Foreia IV 2.5 GLi
- 1982-1992 Klinos II 2.5 GLSi
- 1988-1992 Ochlosia II 2.5 GLi
Mpi2 (1982-19??)
Specs:
- Internals: Cast crank, Lightweight forged rods, Forged pistons
- Compression ratio: 8.7:1
- Naturally aspirated
- Multipoint EFI
- 6900rpm redline
- Unleaded 91
- Tubular exhaust header
- One straight through, one reverse flow mufflers
Used in:
Mpi Euro 1 (1990-19??)
Specs:
- Internals: Cast crank, Lightweight forged rods, Forged pistons
- Compression ratio: 8.8:1
- Naturally aspirated
- Multipoint EFI
- 6900rpm redline
- Unleaded 91
- Cast log exhaust header
- Catalytic converter, two reverse flow mufflers
Used in:
- 1990-19?? Mk3 Klinos 2.5 GL
- 1992-19?? Mk5 Foreia 2.5 GLS
MpiS Euro 1 (1992-19??)
Specs:
- Internals: Cast crank, Lightweight forged rods, Forged pistons
- Compression ratio: 9.5:1
- Naturally aspirated
- Multipoint EFI
- 7200rpm redline
- Unleaded 91
- Tubular exhaust header
- Catalytic converter, one straight through, one reverse flow muffler
Used in:
- 1992-19?? Mk5 Foreia Coupe 20V
204R16
Production years: 1982 through ???
Shared specs:
- SOHC 4V Inline , cast iron block, cast iron head
- Bore: 84.8mm
- Stroke: 70.8mm
- Displacement: 1599cc
Cars used in:
- 1975-1991 Mesaia III
- 1991-2003 Mesaia IV
Mpi (1982-1991)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 9.3:1
- Naturally aspirated
- Multipoint EFI
- 6900rpm redline
- Unleaded 91
- Tubular exhaust header
- One straight through, one reverse flow mufflers
Used in:
- 1982-1991 Mesaia III 1.6 GTI2
Mpi Euro 1 (1991-1996)
Specs:
- Internals: Cast crank, Cast rods, low friction cast pistons
- Compression ratio: 8.5:1
- Naturally aspirated
- Multipoint EFI
- 6800rpm redline
- Unleaded 91
- Short cast exhaust header
- Catalytic converter, two reverse flow mufflers
Used in:
204R18
Production years: 1985 through ???
Shared specs:
- SOHC 4V Inline 4, cast iron block, cast iron head
- Bore: 87.4mm
- Stroke: 74.9mm
- Displacement: 1799cc
Cars used in:
- 1975-1991 Mesaia III
- 1978-1988 Coupe
Mpi (1985-1988)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 9.4:1
- Naturally aspirated
- Multipoint EFI
- 6900rpm redline
- Unleaded 91
- Tubular exhaust header
- One straight through, one reverse flow mufflers
Used in:
- 1985-1991 Mesaia III 1.8 GTI
- 1985-1988 Coupe 16V
Mpi Euro 1 (1991-1997)
Specs:
- Internals: Cast crank, Cast rods, Low friction cast pistons
- Compression ratio: 8.5:1
- Naturally aspirated
- Multipoint EFI
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Catalytic converter, two reverse flow mufflers
Used in:
- 1991-1996 Mesaia IV 1.8
- 1992-1997 Foreia V 1.8
204R20
Production years: 1982 through 2002
Shared specs:
- SOHC 4V Inline 4, cast iron block, cast iron head
- Bore: 87.4mm
- Stroke: 83.2mm
- Displacement: 1997cc
Cars used in:
- 1982-1992 Foreia IV
- 1988-1999 Ochlosia II
- 1991-2002 Mesaia IV
- 1992-2001 Foreia V
Mpi (1986-1991)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 8.5:1
- Naturally aspirated
- Multipoint EFI
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
- 1982-1992 Foreia IV 2.0 GLi
- 1986-1992 Ochlosia II 2.0i
MpiS Euro 1 (1991-1996)
Specs:
- Internals: Cast crank, lightweight forged rods, Forged pistons
- Compression ratio: 10.5:1
- Naturally aspirated + VVT
- Multipoint EFI
- 7200rpm redline
- Unleaded 95
- Tubular exhaust header
- Catalytic converter, One straight through, One reverse flow muffler
Used in:
1 Like
133S9
Production years: 1985 through ???
Shared specs:
- Direct Acting SOHC Inline 3, cast iron block, cast iron head
- Bore: 72.9mm
- Stroke: 71.5mm
- Displacement: 895cc
Cars used in:
Spi (1985-19??)
Specs:
- Internals: Cast crank, Cast rods, Forged pistons
- Compression ratio: 7.5:1
- Naturally aspirated
- Throttle body EFI
- 6500rpm redline
- Unleaded 91
- Short cast exhaust header
- Two reverse flow mufflers
Used in:
