The Best Worst Budget Car

Community Challenges & Competitions
1

You Goal to make a very “ok” Budget Car.

image
image1200×675 276 KB

Game: version latest Unreal build (Opt out of any beta in steam setting)
Submission end End Oct 30 2018

Naming
-Model: your username
-Trim: BT
-Engine: your username
-Engine variant: BTE
-ZIp folder: your username

General
-1980 to 1985
-No (NO mass production or Limited production) parts
-Under 2000 Lbs (907.2KG)
-All Quality sliders at 0
-1,1000 Material cost at 0% margin in the market window (NOT DETAILED STATS)
-No workshop

Frame and body
-Sedan, hatch, wagon or coupe
-no carbon fiber or space frame
-2.6 meter(8.2 feet) wheelbase max

Engine
-Under 100 hp
-Must be Naturally aspirated
-1.25(1250cc)[76.27CI] liter engine max
-4 cylinder max
-3 Valves max
-Mechanically injected,Carburetor or Single point EFI (No race intake)
-Regular unleaded only

Required extra fixture
-Amber Rear turn
-Front Fog LIghts
-Rear number plate

Trim and other
-15 rim diameter max
-steel or alloy wheels
-Hard or med tires
-No Skid tray
-5 seat minimum
-Basic entertainment minimum

You will be scored on:
Material cost (lowest)
Weight (lowest)
Driveability (highest)
MPG (highest)
Safety (highest)
Reliability (highest)
Looks
Top speed (highest)
0-60 (shortest)

The point will be distributed by the amount of contest tents from best to worse
Example:
if there is 3 contestants the best one gets 3 point, the mid one get 2 points and the worst gets 1 point

The Tie breaker (if needed) will be the best of 3 laps around Hirochi short course.

Good luck and have fun!

2 Likes
2

It seems like these restrictions control too much. Maybe have like pu/et restrictions to fight things like DOHC and EFI

5 Likes
3

Aaaaaaaaand everybody stopped reading

10 Likes
4

DOHC and EFI are prohibited…

The no modding parts is the real issue.

1 Like
5

By modded parts i mean no workshop items

6

I was personally thinking that “yeah, you COULD do DOHC, but you’ll have a a shitty interior” so you could go to an extreme but sacrifice somewhere else. Where have I heard this before… oh yeah e v e r y o t h e r c o m p e t i t i o n o n t h i s f o r u m

2 Likes
7

Since everyone wants it dohc is allowed now

8

This challenge looks like its run by someone who wants a specific car but really does not know anything about the car in the first place.

3 Likes
9

Well, for older cars, it’s more a matter of wanting realistic cars, and not getting DOHC from every single person entering, because more power and better fuel economy…

10

Hard pass.

4 Likes
11

Yep. That was clear.
My statement stays

2 Likes
12

Uses 4x4 SR5 Tercel as primary image
FWD and AWD only
No manual transmission

BoI

13

I haven’t ran one of these since before the kei light campaign sorry for any hicups

14

Then you should probally take a look at the other challenges first.
For example the CSR’s

1 Like
15

Yeah i Felt the rules were to restrictive. They’re less restrictive now.

1 Like
16

Is there a reason for this?

If you set up a ET/PU this will probally be coverd

That is weird.

The only good rule here is “Regular Unleaded only”

Yet again these can be covered with a ET/PU limit or a Service cost Limit.

You should try to build 2 or 3 test mules and then base the limits of them

3 Likes
17

I think im happy with the rules now

18

HighresScreenshot00090edit
HighresScreenshot00090edit1920×1080 302 KB

19

-1,1000 Material cost at 0% margin in the market window (NOT DETAILED STATS)

11.000 or 1.000? I’ve made the most basic of the basic cars, and still about 1,700 material costs.

20

is it negative or positive? Hopefully it isn’t negative because I have a feeling that wouldn’t work

1 Like