UE4 Open Beta Body + Variant Issues list

Uhh… it’s a mod :stuck_out_tongue:

1 Like

Oh right didn’t pay attention :o

Fixed 10sSedanLarge family (asymmetry) for next release

Summary

Can you send me your .car file? I can’t replicate this:

Assuming I’m not losing my mind… a headlight seems to have gone missing in the last patch.
image
There used to be a third variant that was just the main unit without the indicator.

Hi, here is the issue of this vanila boxy body. (80sBoxyCompact)

The original wheel arches can be enlarged as wish but it it still can’t use bigger tire size for the front, even I’ve stretched to the maximum. While the rear is able to use the maximum tire width of 225 without any stretching the wheel arches.

Also another things to be noticed (in same body type)
I’ve tried putting fixtures on the center location of the hood, but it will not allow. As it showed in red fixture.

And perhaps this is the main cause of front tire size limit. (it should be able to wear more than 185) As the spindle location is too outward when compared to the rear.
(I’m using as 185 mm tire only and this is the result)

I just checked on one of my cars and the taillights on all of the trims of my car look like this. Moving them around doesn’t fix the issue

Body name please @Gauntlet

1 Like

every version of 60scoupe02 (datsun 240) has tearing by the headlights sockets

The body in questions displays 5mph safety-style protuding bumpers, but the car itself has no morphing feature that resembles said bumpers.

its intentional, the devs are removing bumpers off cars so you can just add your own.

6 Likes


1985 Coupe

The morphs on this body dont save anymore

They also dont save on the 2.6m version of the 2003 truck/SUV either.

EDIT:

This body has issues switching between the 4 door pickup and the SUV variant

Except we don’t really have good bumpers to replace them with, that I’ve seen. :confused:

The thumbnail is still wrong though

07 Not-Cayenne body front and back wheel arch morphs don’t affect tyre size limits at all.

Got some issues with this body and its wagon variant.

Cabin of the sedan should be a bit under 2000L, but ends up like this:

Meanwhile, the wagon variant has a very small passenger volume that gets even smaller than morphed to be bigger:

You ought to check this SUV body, because mirrored fixtures cause its rear end to tear apart on one side. The front end seems normal, though.

its only there in photo mode and in the exporter. many other models do this

Another problem with the S15 body:

It appears to have too much cabin space and too little cargo volume - but this wasn’t the case before the update. This might explain why any car using this body not only weighs more than it should, but also has its weight farther forward than it ought to be (usually 60 front/40 rear, if not worse).

2 Likes