A legendary legacy, Coupes! (Round two! subs open)

ALL_Gr1tty_CoviD_92__MM__-_LOBO.car (51.5 KB)

The 1992 Lobo carries forward the spirit of the 1969 version, refining its performance while maintaining the raw, aggressive soul that made it iconic. Powered by a 4.7L high-revving V8, the Lobo now delivers 344.2 horsepower at 6500 RPM and a 0-60 time of 5.0 seconds, with a top speed of 155 mph. The mid-engine layout remains the backbone of its performance, ensuring precision handling and a perfect weight balance.

While the Lobo’s pop-up headlights and tail lights are modernized, they retain the unmistakable aesthetic of the original. The most notable feature—its signature twin exhaust tailpipes—remain identical on both generations, reinforcing the continuity of the Lobo’s fierce personality. The 1992 model further enhances the driving experience with a 6-speed manual gearbox, improved suspension, and a multi-point EFI fuel system. It’s a car built for those who crave speed, performance, and the thrill of the drive, with a legacy that’s unmistakable and unstoppable.






8 Likes

Ah damn!

Classic Heritage, Modern Styling. The 1988 Maunderer GT 4.5


I know I already posted these pics, I’m just not feeling like downgrading to Ellisbury again

Having an ever shrinking budget since the release of the Maunderer 20 years ago, [REDACTED] had been forced to reuse the now antique all alloy engine block for the latest GT coupe iteration. Even with the addition of fuel injection and punching the block out by over a litre in capacity, it’s obvious that the engine’s longevity is coming to an end due to the times of tightening fuel and environmental concerns.

1 Like

For the techpool thing, can we set them all to +7?

Ten years had past and the '69 “750 LSi” was getting old.
Even after some revisions throughout it’s lifespan,
it was time for it to retire and craft a good follow-up!

The second car in line had a high standard to uphold.
They went all in on this project so everything was on the line.
BillySport Motors kept the same basics; light weight, nimble and high revving.

In 1979 we were introduced to the “BILLYSPORT 780 LSi”

With the designers focusing on body and chassis,
they planned for a model that was ahead of it’s time.
A risky futuristic design choice was made with this car.
The original style of trim features were kept as much as possible
with a (as we now know) timeless modern touch.

After investing into steel presses, an upgrade from spaceframe to
monocoque could be realized to save weight, and gain safety.


BillySport Motors also engineered a new engine to keep up
with the emissions regulations.
A 1999cc NA DOHC24 V6 with aluminium heads revving up to 7500rpm
and putting out 170hp and 197Nm of torque to the rear tires as a result.
This time moving the engine to mid longitudinal to get a better weight distribution.
The outdated clutched LSD got replaced for a modern Helical differential.
Weighing in at only 780kg this resulted in an agile track conquering machine
with a 0-100km/h in a blistering 4.8 seconds and a topspeed of 250km/h.

(This project had to succeed because it nearly bankrupted the company!)

BillySport Motors had made quite the name for itself over the years with the 750LSi and as hoped the public lined up to get theire hands on
this new quick 'n quirky sports vehicle.




2 Likes

I haven’t limited that, and it wont count towards the points anyway. It’s mainly the decisions made on engineering side

1 Like

Hexe Magdalena Mark III

The year 1985 marked the release of the third generation of the Magdalena. It retained the fiberglass body over a steel monocoque and the 1.6L engine but introduced a turbocharger for the first time. The turbo upgrade, necessary to meet updated emission regulations (the car now complies with WES 11), also boosted the engine’s performance. The reliable engine now produces 157 kW and generates just over 280 Nm of torque.

Designed to run on low-octane fuel, the car helps owners save on fuel costs without sacrificing performance. Weighing only 840 kg, the Magdalena Mark III accelerates from 0 to 100 km/h in under 7 seconds and reaches a top speed just shy of 275 km/h.

2 Likes

Does the year range refer to just the model year, only the trim year, or both? Especially since I have multiple possibilities for a submission in this round.

trim year

Also, do you guys a want a week extension?

I am finishing mine up, might be ready tomorrow. Sorry, irl stuff has taken my focus lately.

That would be amazing

did you get my submission ?

sure why not

Deadlines extended to 14th of Feb

1992 AMS Antares 5.0 V8 GTS

Adapted from my TMCC38 entry with minor visual and techpool adjustments for compliance with the ALL ruleset.

The previous Antares had been introduced in 1974, and in Federalized trim launched with just 200 bhp - a sizable decrease from its predecessor, but a necessary evil to accommodate the use of unleaded fuel, which made the fitment of catalytic converters possible. Although the introduction of electronic fuel injection in 1982 gave it a new lease of life, it was clear that a complete redesign was necessary to keep the model competitive into the 1990s and beyond. The new car debuted in 1990 and instantly became as much of a hit with the motoring press as it was with buyers - the entire production run for the first two years sold out within a matter of weeks.

Boasting an all-new, quad-cam, all-alloy 32-valve V8 with variable intake and exhaust valve timing, the Antares’ new and larger platform still had a galvanized steel chassis, but in a first for the model line, it now had an aluminum hood, doors, and trunk lid to minimize weight gain. Curvaceous styling with flush-fitting elliptical headlight clusters (in place of retractable units, which had to be discarded on safety grounds) made it stand out from the crowd even more, but the central hood bulge flanked by two functional vents remained, as did the auxiliary vents on the front fenders - and these features helped link it aesthetically to the previous two generations.

With a multilink rear suspension to go with its dual-wishbone front end, along with large vented disc brakes and staggered low-profile, high-performance tires, the new Antares was a far more serious proposition than before. An aerodynamically sculpted floor, combined with subtle front and rear spoilers, provided additional stability at higher speeds. Initially available in one trim level (GT), a GTS package was added in 1992, bringing individual throttle bodies and tubular headers; combined with a more aggressive cam profile, this bumped the output to 400 bhp - a heady amount for the era. Now, more than ever, it was as much of a fast and agile sports car as it was a comfortable and luxurious grand tourer, especially with uprated brakes and suspension, along with wider wheels and tires to harness the increased output.

The interior was far more modern than that of its predecessor, with higher-quality materials and an advanced stereo sound system with a cassette tape deck and CD player, the latter of which had an in-dash 6-disc stack. In addition, dual front airbags came as standard, as did traction control and anti-lock brakes, thus yielding a quantum leap forward in safety. Even so, all this extra tech pushed its price upwards to $50k AMU in GTS guise. Despite this, it still sold well during its lifespan, and if anything, was even more profitable than its predecessor due to AMS targeting the more lucrative higher end of the sports car market, where the per-car profit margins were even higher.

Above: Cover shot from July 1992 issue of Exhaust Notes magazine showing a group test between an AMS Antares 5.0 V8 GTS and an MM Lobo. (Special thanks to @Gr1tty_CoviD for providing a download link for the Lobo.)

As this generation of Antares reached the end of its lifespan in the early 2000s, one question remained: What would come next?

5 Likes

Returning with a bang for 1981, Hikaru Katana CHI-18-3 ‘Izanagi’

Play any citypop this time, it’ll probably fit…

Kyoichi Hikaru, the man that had so successfully brought Hikaru H. I. to the forefront in the mid 1960s all the way through the 1970s, was now just as successful as his pride and joy, the Katana line of small sports cars. With the immense success of his first project at the age of only 26 in 1965, he had proven to his father, the man that had founded the company in the first place, that he was driven, purposeful and responsible enough to be in his position. Of course, his career didn’t end there, he then went on to found within the company a dedicated department for the creation of the Katana line of sports cars, employing a variety of talented engineers to help him make truly incredible cars. The 1970s rolled around quickly, and by the turn of the decade, Hikaru-san knew that the now venerable but somewhat underpowered first generation Katana needed a worthy successor. In his home country, he would be lucky enough to avoid any sort of oil crisis, and as such, their work during the 1970s on the second generation Katana was fruitful, producing a fun, slightly more powerful, if slightly heavier sports car. While it didn’t seem to make the same excellent impression that the original made, it was certainly still a success by almost any metric.


(1981 home country advert for the all-new Katana.)

The world was changing by the time that 1979 had rolled around though, and even the once quite powerful second generation Katana was being quite easily outclassed by offerings from Antares, Nordwagen and HAMFA, among others. As such a replacement was required. By now, it would be and understatement to say that Hikaru-san was a different man. He was certainly no longer the lively, naive 26 year old that he was in 1965, he was now very much 40 years old, and he could feel each year of it. His first son, the child that had given him the inspiration to create the Katana in the first place was now a teenager, and was just entering his final year of high school, and Hikaru-san knew that the stresses of teenage life were catching up with his boy. He regularly disrespected his father, spoke to him far less than as a younger boy, and appeared to talk less to pretty much everyone, especially the girl that he had grown up with who lived in the house next door.

All of this really dragged on Hikaru-san as he walked into work in early 1980, still trying to think of what he could do to make his brand-new idea for the Katana a good one. All that he had to do, he would tell himself constantly, is make a car that looks like a Katana, is a bit more powerful than last time, and is cheap enough to sell well. As such, that was what he did. From the base of the already-existing 1976 Hikaru Samurai Sedan of that year, he would attempt to create a Katana that would save money and time, eliminating the need to engineer a new chassis and body. He would simply redesign part of the body to contain some of the signature Katana trademarks, a sloped back, sidevents and half-covered rear wheel, but leave as much the same as possible.

All of this expedited the process of creating the new Katana, but within him, there was a nagging feeling, one of dishonour, that he was failing his father, the one who granted him the honour of creating cars in the first place. He would push that all down though, and continue working through the creation of his new car. By the later end of 1980, the design work had been finished ahead of schedule, and the engineering teams were preparing a first prototype to be tested.

It would contain Hikaru’s updated 1.8L straight six, now equipped with 24V DOHC and an almost unheard of electronic multiple-point fuel injection system, and unsurprisingly, was now pushing just over 120HP. The interior was to be constructed in the same fashion as the original, retaining the same expensive ‘Jindai Sugi’ wood panelling, but this time updated for the 1980s. It contained a fully adjustable cassette system and a highly advanced electronic climate control system. The interior furnishings were also quite luxurious, with supple wool used on all soft surfaces and leather where necessary. Unsurprisingly, the car was quite hefty now, weighing almost 900kgs unladen.

The new car would be test driven early in 1981, and the test driver, the same one that had driven the original Katana all the way back in 1964, insisted that he be the one to test the new car. They would head down to the same test track, and the test driver, Minato Koriyama, was told to go nuts with it. They saw him pull away smoothly, get the car up to speed, and watched it as it accelerated off into the distance. Quite quickly, he came back, and with an expression on his face that was nothing short of pure rage.

“Hikaru-san, you dishonour yourself, your customers, and your family name. I refuse to drive any more of your cars if you don’t at least try to put some effort, some soul into them.”

He walked off, got into his own car, and drove off.

With that glowing review, Hikaru-san was conflicted, but Hikaru H. I. needed a new Katana, and that was what he was going to provide them with. As mid-1981 rolled around, the all-new Katana was released to the public, and all that Hikaru-san could do was wait. Would his attempts to cut down on weight make his car into an ugly duckling, or a cheap, cheerful shooting star? Would it remain as precise and refined as a samurai sword, as the Western reviews had said about it, or would it be as dull as a butter knife? He knew deep inside that his car had been Americanised, becoming heavy and cumbersome, and that he had abandoned what had made his first car beautiful - the idea that had made his country successful - that there is beauty in simplicity.

13 Likes

After a four year hiatus, the Sidewinder for 1986 comes back reimagined. Reimagined that is, to a 4-seat coupe. Dont let the extra seats fool you because, sticking to its roots, there’s still a big V8 under the hood packing a serious punch.

The 5speed manual is sure to make every stop light fun, you’ll get used to plastering grins on your wife and kids faces. More sporty than ever, the Sidewinder is poised to take aim.

This design represents a bold and radical shift from what was original to the Sidewinder nameplate. In an attempt for a new type of customer, Wells rolled the dice.

5 Likes

1984 ARMOR HURRICANE S/C

1984 was the last (and best) year for the second gen Hurricane. Introduced in 1975, it followed the Mustang’s trend of downsizing. It now rode on a 99 inch wheelbase, which was much smaller than previous Hurricanes but still 3 inches longer than the Mustang II. With the longer wheelbase and shorter overhangs than the Mustang, Armor was confident that their ponycar would at least win the eye test with prospective buyers.

Styling was rather conservative, and became increasingly so with it’s 1979 facelift. 1982 saw the addition of plastic bumper facias that blended with the bodylines. S/C’s still retained their trademark headlight covers, which were clear and left the headlights functional even if the door mechanisms malfunctioned (American safety regulations prohibited any coverings of the headlights while they were on).

The fastback-style roof remained throughout the platform’s run. At the time, Armor Motors was reluctant to give their ponycar a hatchback. Instead, they offered more access to the trunk by lowering the bottom of the decklid and having the taillights raise with the trunk.

Even by 1975, the 353 CID V8 was long gone. Second gen Hurricanes now offered a standard 2.2 liter inline 4 and a 3.3 liter V6. Both engines were developed together and featured identical 3.5 inch bores and strokes. In an effort to save money, these engines shared internals like pistons, conrods, rings, valves, etc.

The 303 CID V8 remained for the S/C. Through the seventies its smogged carburetors left much to be enthused about. However, in 1984 Armor introduced its Jet-Tech throttle-body injection on all of its engines. This seemed to wake up the 303 particularly, now boasting 205 hp and helping the Hurricane S/C to a 6.2 second 0-60 time. It was one of the quickest American cars produced for 1984.

While the S/C was electronically limited to 135 mph, police packages featured a chip that would allow the car to climb to its natural limit of 156 mph.

Interestingly, 1982 was supposed to be the last year for the second gen platform. But when spies revealed the next Hurricane to be front-wheel-drive, public outcry became too much to ignore. Third gen Hurricanes would have to be retooled as rear-drive ponycars and would arrive for the 1985 model year.

7 Likes

ACZT

ACZ Presents the 1984 Badger!

ACZ is proud to present the Badger for the 1984 model year! The successor to the famous 66 Badger, the new model is proud to bear the name and carry on its legacy!

History

Amidst the tightening emissions regulations, enthusiasts are still demanding for a cheap, fun car with the creature comforts and safety of a modern vehicle. While some smaller turbocharged options exist, some want a callback to the big V8s of yesterday. The Grand Deluxe and L-4 have some performance trims available, but the customers wanted something with fewer doors. Thus, development of an all new Badger started.

The Badger

Chassis

Once again, the Badger was formed from a shortened Grand Deluxe chassis, but it keeps its sibling’s standard double wishbone suspension. The new Badger is nearly identical to the original’s wheelbase, keeping its sporting credentials alive. However, the new monocoque construction keeps the body rigid and light, improving cornering and acceleration.

1984 ACZ Grand Deluxe
Drivetrain

The new Badger received a beefy 4.6L V8, producing upwards of 275 horsepower, thanks to its clever EFI system and forged internals. This power is sent to the rear wheels through a 5-speed manual and a new viscous differential.

Body

The body was developed in house by ACZ, keeping its split grill and wide taillights from its ancestor, but stays in line with the modern design language. Inside, you’ll find seating for 4 and a premium cassette player.

Performance

The new powerplant allows the vehicle to do 0-60 in 5.5 seconds and can a standing quarter mile in under 14 seconds! The double wishbone suspension and sport tires keep it planted in the corners, up to a gut-wrenching .95 lateral g. Topped off with a curb weight of under 2800 lbs and standard disk brakes, this vehicle can stop and turn on a dime!

Affordability and Driveability

While the performance is extraordinary, the complexity is ordinary. The pushrod V8 powered by regular gasoline keepsrunning costs low. Plus, as one of the first ACZs with standard ABS, this vehicle has a trick up its sleeve to keep you out of the bushes. Even if you do end up in one, the monocoque chassis will better disperse the forces of the impact and ensure that you will walk away to tell your friends how you binned your car.

Closing Remarks

The new Badger keeps its predecessor alive with its outstanding performance and new features. While the 66 Badger set the bar, the new Badger continues to define the standard in the modern world.

The son and the father waiting in the shadows to strike when the time is right.

4 Likes