What is washer fixture?
Unleaded fuel is available in this era - but is there any obligation to use it? And as for catalytic converters for cars made in 1972 or later, are those parts even legal?
Does this allow for the use of windshield wiper fixtures on the headlights, albeit scaled accordingly? Besides, I don’t know of any period-accurate washer fixtures for the 1970s.
Also, fuel injection started to become more common in the later years of this era - but I’m sure they were usually reserved for higher-end machinery.
And regarding this specific body set:
This one has a bumper slot that can be repainted - so does it count as a bumper if I set the Car Bumper color to plastic or chrome if I were to use any of the bodies in this set for my submission? I suspect it does.
My first guess would be, as it’s based on my challenge, that if it has a moldable bumper, it counts. But don’t quote me.
Scene from a movie I cannot remember the name of but it has a lot of AEKI in it.
As I’ve mentioned in the previous round, in 1958 AEKI acquired Sten-sil AB, a transmission and axle manufacturer founded in 1915. Sten stands for Swedish Transmission EngiNeering. The company had it’s base of operation in Lund during this time.
At the time, Sten was developing a small, front wheel drive vehicle with codename 3C-45, which after the acquisition by AEKI became the AEKI 45 “Krabba”
The Krabba was pretty much ready by the time AEKI acquired Sten-sil so it was launched just 6 months after. It had a unique to it 3-cylinder engine driving the front wheels. They were a cheaper and smaller companion to the big rear-wheel drive AEKI.
By this point AEKI had pretty much 2 operating bases, one in Malmö and another in Lund. Both pretty independent from each other, although it was pretty clear the Malmö part is bankrolling and making decision for Lund part.
Basically, Malmö was making the conservative RWD “Hundred” series car, while Lund was making the innovative FWD “Sten” car. Under the same umbrella.
Funnily enough, while there are many arguments stemming from fanboy who think their brands is the best. Fans of AEKI are always arguing about Malmö cars and Lund cars. Despite them being the same brand.
AEKI S69 “Skeva”
The Krabba stayed in the market until 1968 when Sten-AEKI introduced the next generation car. Codename 6C-69. Actual name AEKI S69.
The S69 was being developed during the entirety of Krabba time in the market. 1958 to it’s introduction in 1968. It was completely different to the first Sten-AEKI. Still front wheel drive, but larger, more comfortable, with a completely new suspension and engine.
Curiously, it’s engine was longitudinal mounted. And it was a tiny V6 displacing at first only 1700cc this is good for 80hp through a very modern 5-speed gearbox developed by Sten-AEKI (which specialised in gearbox anyway) to the front wheels. The suspension is double wishbone front and solid axle rear. It also has front disc brake.
The idea was to maximized the space inside which is accommodating, although not that plush. AEKI decided to move the 200 series car slightly upmarket during the introduction of the Krabba so the two cars are not directly competing.
Of course, the idea of a single company with 2 bases of operation is incredibly costly. But it stayed this way until the rationalization during the 1980’s. Which we’ll be talking about later.
The S69 Skeva was made until 1980 when it was replaced by S80 “Skeva II”.
5 Likes
Windshield washer nozzles.
There was no emissions laws (except for closed crankcase ventilation from 1969 on, but that’s not something the game can implement anyway) in Sweden until 1976. In itself they are a bit strange and can’t be replicated in the game and I will come to them in the next round. In this round it is still wild west and I would not put on a cat because it would not make any advantage, if it’s not strictly for lore reasons.
Yes. In this era most manufacturers used wipers so I fully understand how you are thinking.
Molded in bumpers counts regardless of size or strength. This is only done to replicate the first crash test regulations that arrived in 1969. There are no rules regarding the bumper itself like the US 5 mph regulations.
2 Likes
1973 Mara Irena V 1.3
The Mara Irena appeared in the late 1960s and size-wise was definitely a step up from the diminutive Tovarish. However, it was still designed and engineered for maximum cost efficiency in order to be competitive on the Archanan market. Initially, it was available as a sedan and a panel van.
Generous space for cargo, and initially available for just under the magic $10k barrier*
The main engine for the Irena was a new 2 litre OHV inline four. For the most cost-conscious buyers, however, the Irena sedan and panel van base models were also available for a while with a 1.3 litre I4 - which had its roots in the 1940s Konyk engine - in a particularly economical tune for the higher octane fuel available in export markets.
The extra roof height allowed an easy transport of bulkier goods
The Konyk 1.3 engine was only discontinued in the Irena after the third attempt; the first two planned discontinuations coincided with the First and Second Dalluhan Oil Crises in the early and late 1970s, and market demand for frugal cars both times threw the 1.3 an unexpected lifeline.
The Irena remained Mara’s main car for domestic and export sales until the fall of the Closed Curtain. Over time, it became also available in 5-door wagon, hatchback, coupe, ute and convertible variants, receiving only modest upgrades over the years and decades.
* or whatever a meaningful price barrier in this ballpark would be in 1970s kronas…
3 Likes
Mons Automotive
Introducing the
Mons Astral C
Introduced in 1967 as a new model, the Mons Astral was a true turning point in Mons Automotive history. While still mainly focused on the North American market and following the main trends on their home continent, the Canadian maker started to incorporate European engineering into its cars. This resulted in some hybrid cars with a mix of North American and European style, that were well received domestically as well as internationally. The Mons Astral was no exception: it competed in the North American muscle market with its brawny looks, powerful V8 engine, and live rear axle, but had a modern Eurpean-inspired unibody chassis, brake system that didn’t fry after at each stop light, and a more understated styling than its North American rivals.
For 1969 (OOC: the car submitted for judging) several updates were made to the Astral. The original I6 engine and drivetrain was upgraded to a more traditional North American affair: a five-litre OHV V8 putting out just over 240 BHP at 5000 RPM. Its staggered tires made sure that the power made its way onto the tarmac, propelling this 1.3 ton beast 0-100 in 7.6s with its 4-gear manual gearbox. The side exhaust was added to cater to the more extreme domestic market.
The updated premium interior for 1969 featured all the amenities normal for the time found in any premium trim muscle car: quality leather seats, electric windows, a sporty and ergonomic dash. Although the first true cupholder is now attributed to the 1983 Dodge Caravan, the Mons Astral was actually the first car to include cupholders (although they were called “snack trays” at the time) - a true pioneer of its time!
1972: Mons Racing enters the scene!
The Mons Astral also stands out in the history of Mons as the catalyst behind Mons Automotive’s decision to open its fully-owned subsidiary branch: Mons Racing. With a growing cash flow following the boom years of the 1950s and early 1960s, and seeing the growing popularity of auto sports, Mons Automotive saw an opportunity to show off and advertise their cars in various racing leagues. But in order to do so, they needed their own in-house race engineering and manufacturing division. So, in 1972 Mons Racing was born. Their first car to enter the racing world was the Mons Astral R, a modified version of the street-going Astral C. The Astral R raced in the 1973 25th anniversary Nascar series. The car was a little rushed to production and reliability was not stellar, but Mons Racing was firmly on the scene!
5 Likes
Before the time of luxury cars from a brand that would outperform their flagship performance range for years. The Schnell C-1600 was a truck that could. Production moved from a factory in Germany to more places in mainland Europe to reduce the waiting list of previous cars. The workhorse that can. The rear engine New 1400-Series has been rendered obsolete due to more cars in the model range. As of now the brand produces Crossovers and performance cars and the bland versions of performance cars to suit their wide variety of demographic. But this was the first and last pickup truck they ever made.
1 Like
Is it possible to use the same engine family across multiple rounds? If so, does it require using different variants for each one?
There’s no rule against it. According to my lore, we use the boxer from 1946-2003. The rules only say that variant can’t be newer that trim, so theoretically, you could use the same engine every round until it is outlawed by muffler/emmissions.
1 Like
MY66 Tack 230F
Unfortunately for Tack, lightning didn’t strike twice. Sales of the 23F were healthy but never threatened to upset more popular brands such as AEKI with their very successful AEKI 100.
Money was tight for a completely new design so Tack chose to refresh the classic A Series inline six in order to ensure there was enough funds to afford the more substantial changes required elsewhere.
The result was a sedan which was quicker, easier to drive and more fun to hunt the backroads in. Comfort was improved and the high compression six was better on fuel than before. The Tack 230F had all the ingredients needed to woo buyers back; now all the public had to do was buy 'em!
3 Likes
I have never stated anything against it in the rules so just go ahead, like Restomod says.
1 Like
1970 Moravia Jestrab 1600 DCS
The 1960’s were a strange time for Moravia’s home nation of Czechoslovakia. The communist government that had been in power started to loosen restrictions on it’s population and a period of liberal views began to sweep the nation in a movement that was to be called the “Prague Spring”. It was during this time that the company saw an opportunity to introduce a few new models to it’s lineup. The first was to be the replacement of the rear engined 850DA. The other was a larger family sedan called the Jestrab.
The Jestrab’s basic layout was fairly contemporary with what was being built at the time, with an 1278cc OHC inline four mounted at the front with power going to the rear, although it did feature an independent rear suspension design.But there was room for improvement, so the Moravia engineers brought it onto them selves to make a racing version.
Moravia Jestrab 1600 DCS in full race trim
So in 1970, the 1600 DCS entered the picture. They started with, in essence, adding an extra cylinder to the Jestab’s engine to create a 1.6 liter inline five. It also recieved a new cylinder head featuring dual camshafts. This allowed the DCS to make 98 horsepower at 6,100rpm and 101 foot pounds of torque at 3,900 in street trim. This propelled the 2100 pound car to a 10.4 second sprint to 62kph and a top speed of 111mph.
The 1.6l proved successful enough on the track that it was decided to continue to produce the engine for use in export markets, as well as governmental positions back home. Pricing for this speedy hawk started around $15,000 AMU.
7 Likes
1974 KAI K1 Mk2
The second-generation KAI K1 built on its predecessor’s virtues and improved them, thanks to a new platform and an extensively galvanised bodyshell. Under the hood, there was now a 1.4-litre single-cam inline-four breathing through twin carburetors. For the first time, radial tires and front disc brakes were fitted as standard. In some markets, the engine was tuned specifically to be capable of running on unleaded fuel.
The K1 was originally aimed at the North American market, where demand for smaller, more economical cars had taken off in the aftermath of the oil crisis. In particular, the HE (High Efficiency) variant shown here was built with efficiency in mind, and this it duly delivered with an average fuel economy figure of 33 US mpg - a vital asset as petrol prices stayed high for most of the rest of the decade.
Priced at $11,000 AMU in 1974, the K1 Mk2 soon became a common sight on American roads - and it was also a strong seller in other regions, including Europe. As the battle for efficiency raged on throughout the 1970s, the K1 Mk2 proved to be more than good enough to remain profitable for its maker, despite its competitors’ attempts to surpass it during its lifespan.
6 Likes
1971 AIM Sparrow A - 3
Buoyed by the success of their Specials, AIM looked to the 70’s intending to make a world beater to market in Europe, and decided upon the Sparrow, a tiny budget-oriented supermini aimed squarely at European city dwellers wanting a cheap runabout.
Coming in at just $9,890, AIM had to cut many corners to get the car to that price point while retaining more “premium” features like a standard radio and “fantastic plastic” trim around the bottom of the car. Power came from a new 1.3L I3 with a budget carburettor, making a modest 42kw, more than sufficient for around-town use.
The price shaving was so widespread that ex-AIM employees would later admit that the vents on the boot weren’t for increased cabin air circulation as marketing suggested, but rather to “Stop the cheap boot lock from breaking when you drove above 90[km/h]”. The paint was another cost cutting measure, with the Sparrow only being available in three popular colours from the Special to cut down on paint orders.
Chancing onto a perfect release date, the Sparrow arrived in Sweden shortly after the 1971 train strike. AIM pounced on the opportunity, circulating the below picture to the press and ad agencies with the tagline “More reliable than the trains.” (I don’t trust google translate enough to translate that so just pretend it’s Swedish).
6 Likes
ITA Corbeta 2500 GS/GT
The 1968 ITA Corbeta became a significant milestone in the brand’s history; it was presented to the public as an affordable luxury class, aimed mainly at the growing upper-middle class of the country.
It was sold in two body configurations: 2-door (GT) and 4-door (GS) sedan. Performance wasn’t it’s strength, as the 2.5L I6 that powered both versions produced only 107hp. However, the car proved to be very confortable and fairly easy to drive, and the safety equipment on the top trim level was superior to other competitors. Apart from that, it’s unique design, with smooth lines and subtle chrome details, stood out among other more traditional designs for it’s time.
Learning from their mistakes made when exporting the Cuter (forcing international clients to buy the car directly from the factory and deal themselves with the shipping, thus heavily limiting export sales), ITA set a small number of dealerships in Europe. The highest trim level of the model, the 2500 GT, became ITA’s most exported car during the 60’s. It’s reasonable price (from $11000 up to $13500 AMU) and a well received ad campaing (under the motto ‘the car for the ones that deserve more’, the brand aimed directly at european overpriced sedans) made it a popular choice in Europe.
ITA’s 1968 export line up. Left: Cuter, Rear: Goleta II, Right: Corbeta
7 Likes
Now there is under 48 hours (actually only a bit over 46) left and this far I have complete submissions from:
@VicVictory
@conan
@Maverick74
@AndiD
@cake_ape
@HighOctaneLove
@interior
@abg7
@lotto77
@prium
@Petakabras
Car file but no presentation from
@Restomod
Again, shout if you can’t find yourself in here. And remember that you can jump in at any round, even if you have missed one, more or all earlier rounds.
4 Likes
Cabrera Boreas COPA
Lore
The midsize car of Cabrera´s lineup, the Boreas wasn´t an innovative car by any means. It proved to be a reliable mean of transport, though. Reliability and low cost were the main points of the car.
But that couldn´t sell cars alone. In Spain, national carmaker SEAT already had a similar model to this, the SEAT 124, which was as reliable but had more appeal thanks to it´s more powerful cousin, the 124 FU, equipped with a FIAT twin cam engine.
So, in 1970, Cabrera released their own “sports” saloon, the Boreas COPA, with a pretty similar (or identical) engine.
While the spanish market was still not ready for large quantities of these models, in Europe people was craving for them, and so, Cabrera exported the COPA
6 Likes
I like that. Which body did you use for it?
Fiat 131 I guess