Trucks, Vans, Utes, and SUVs thread

Foreground is the 1972 Van Zandt Brazos. It replaces the wildly successful, but aging, 1953 Brazos, background.

3 Likes

RIGEL FURGO! (1996 van)

The Rigel FurGO! is a light commercial vehicle produced by RIGEL since 1996, it comes in two variants. The first model called “Panel Van” can be chosen with three different configurations that will change the length of its chassis or the height of its roof to create a greater cargo volume. The second model consists of a cabin for three occupants and a chassis ready to be built, being able to choose bodies such as a flatbed or a box for small and medium-distance delivery.


7 Likes

1989 SVM Ibex 5.7 Xtreme

Another trim of the Ibex, this time a decontented one (standard interior, safety and stereo) with the focus now on off-road capabilities, thanks to fitment of a softer suspension with a higher ride height, along with with narrower tires and softer brake pads.

2 Likes

2000 Pippuri Gobier [Gobier; as in someone who could cross the Gobi desert]

Pippuri Gobier aims it’s sights squarely at the few years earlier released Mercedes M-Class. As an entrant to the fresh large luxury SUV category, it sources it’s design from the previous year’s Pippuri Oinas, presented in the sedan/estate thread.

Gobier aims to combine true 4x4 capability with luxury seating for 5 adults and 2 children, or small adults. Hubcaps meant to mimic old fashioned offroader hub locks and functional roofrails crown the functional yet luxurious look of the Gobier.

Turn the key to adventure, with Gobier.

5 Likes

1989 SVM Ibex 4.0

This is the most basic version of the Ibex, powered by an OHV I6 displacing 4.0L and developing 160 bhp.

The example shown here is fitted with dealer-installed accessories such as a rear tow bar, a front bull bar with a winch, and a roof rack.

Interior

3 Likes

I believe this technically qualifies as a van while being a piece of cheese

14 Likes

2006-2010 Omota Tackler


7 Likes

As nice as always!

1 Like

Brutto Grand Ranger (1993-2001)- American SUV that saved the Brutto from bankruptcy

Engines:
5.7 V8 16V 266hp
5.2 V8 16V 214hp
4.0 I6 12V 184hp
2.5 I4TD 8V 113hp

3 Likes

2005 Wells Storm Raider Sport (left) and Storm Raider 4x4 (right)




6 Likes

2008 Tokis Maryway
The Maryway is a Japanese MPV made by Tokis Motors, a division Of Omota Motor Corporation. It is related to the Grand Transvan heavily, and ran from 2008 to 2014.


7 Likes

chevy van chevy


9 Likes

2023 FWM Browning CS
We’re Mad Enough to make this thing Rear Wheel Drive with a 6 Speed Stickshift.
And We Also Mated It to a Naturally Aspirated 450hp 5.3L V8
Results, Not Your Average Boring Crossover!


5 Likes

BAMC Kingswood (Bruckell Australia Motor Company) (2009-???)-Australian ute produced by BAMC from 2009 to the present day

SXR

SXS/SX/S

XS/X

Engines
7.5 Supercharged V8 16V RWD 6-speed Manual (805hp) (SXR)
6.5 Supercharged V8 16V RWD 5-speed Automatic (475hp) (SXS)
6.5 V8 16V RWD 5-speed Automatic (351hp) (SX)
5.7 V8 16V RWD 4-speed Automatic (301hp) (S)
5.2 V8 16V RWD 5-speed Manual (241hp) (XS)
4.0 I6 12V RWD 5-speed Manual (201hp) (X)

4 Likes

1980-1995 HRND Vanberry

1 Like

Vanberry

1 Like

DUTY LINER T200/220/250

THE MEDIUM-DUTY TRUCK

In 1997, the first vehicle of the BlueStar company was launched on the market, which focuses on a new type of medium transport truck. This truck starts from scratch, being one of the most difficult operational challenges, achieving as a result the optimization of a robust chassis, a powerful engine and a comfortable interior for the most demanding work.

11 Likes
The 2005 Zushi All Carry 1700

Built for the Japanese market the All Carry 1700 featured a humble 1.7L gas engine producing 162hp @ 3500rpm and 276lb-ft @ 2100rpm mated to a 6spd manual transmission. A climate controlled “reefer” box also came standard along with a comfy interior with room for 3. Starting MSRP was set to ¥2,296,862.20

9 Likes

I love this model, a light delivery truck. Congratulations on the level of detail. I will definitely explore this chassis because I was thinking of creating something like the renault maxity

1 Like

I have to finish the interior, the photo scene hides it well lol. But once it’s done and I’ve adjusted the weight then I want to upload it to BeamNG

2 Likes