Home | Wiki | Discord | Dev Stream | YouTube | Archived Forums | Contact

FAAL - The Engines™

FAAL: The Engines.

This thread is likely to be updated a lot, and will serve as a place where I’ll post engine specs and link them in the company’s topic.

Engine code reading:
-First three numbers are max displacement and number of cylinders (184: 1.8L, 4 cylinder).
-First letter is the head type.

  • P: Pushrod
  • S: Direct acting SOHC
  • R: SOHC with Rockers (4 valves per cylinder)
  • D: DOHC (4 valves per cylinder)
  • F: DOHC (Five valves per cylinder)

All those numbers make for the engine family.

-Next 2 numbers are the actual engine displacement (13 => 1.3L. 8 => 800cc, etc)
-The rest of the code is fuel delivery type.

  • C: carburated
  • Ce: carburated, eco
  • DC: carburated, DCOE
  • M: mechanical injection
  • spi: single point injection
  • mpi: multipoint injection
  • DI: direct injection
  • D: Diesel, indirect injection
  • TD: Turbo Diesel, indirect injection
  • TDE: Turbodiesel, direct injection

The rest of the code varies. If it’s a number, it’s likely the total number of barrels of the carburators. U means Unleaded fuel (for an updated version of an ancient engine to run on unleaded), E means Emissions (for engines running hypereutectic cast pistons). US is for USDM only engines.

Example: 184S16Ce2UE: Engine family 184S (4 cyl, 1.8L max, single cam), 1.6L, twin carb eco, unleaded, hypereutectic cast pistons


Petrol engines:

123P: Inline 3, pushrod, cast iron. 1946-1985. 30-36hp

133S: Inline 3, SOHC direct acting, cast iron. 1965-1999. 46-71hp

133R: Inline 3, SOHC 4V, cast iron. 1985-???

154P: Inline 4, pushrod, cast iron. 1955-1975. 50-85hp

184S: Inline 4, SOHC direct acting, cast iron. 1965-1992. 60-104hp

204R: Inline 4, SOHC 4v, cast iron. 1982-???. 116-135hp

236P: Inline 6, pushrod, cast iron. 1949-1965. 70-95hp

236S: Inline 6, SOHC direct acting, cast iron. 1965-1988. 90-198hp

255R: Inline 5, SOHC 4v, cast iron. 1983-???. 126-658hp

408R: 90° V8, SOHC 4V, cast iron. 1990-???. 260-370hp

Diesel Engines:

194P: Inline 4, Pushrod, cast iron. 1964-2001

255P: Inline 5, Pushrod, cast iron. 1970-19??

3 Likes

123P11

Production years: 1946 through 1957

Shared specs:

  • Pushrod inline 3, cast iron block, cast iron head
  • Bore: 72mm
  • Stroke: 85.7mm
  • Displacement: 1046cc

Cars used in:

  • 1946-1955 Plebia 4P
  • 1946-1953 Plebia Plateau
  • 1946-1957 Plebia Fourgonnette

Ce (1946-1957)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 6.6:1
  • Naturally aspirated
  • Single barrel eco carb
  • 4600rpm redline
  • Leaded 92
  • Cast log exhaust header
  • Two baffled mufflers

1 Like

236P23

Production years: 1949 through 1965
Shared specs:

  • Pushrod inline 6, cast iron block, cast iron head
  • Bore: 72mm
  • Stroke: 94.4mm
  • Displacement: 2306cc

Cars used in:

  • 1949-1960 Foreia mk1
  • 1960-1974 Foreia mk2 (pre-facelift only, 233L trims only)

Ce2 (1949-1960)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 6.6:1
  • Naturally aspirated
  • Twin Single barrel eco carb
  • 4700rpm redline
  • Leaded 92
  • Cast log exhaust header
  • Two baffled mufflers

Used in: 1949-1960 Mk1 Foreia 232


Ce3 (1949-1960)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 6.9:1
  • Naturally aspirated
  • Triple Single barrel eco carb
  • 4800rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two baffled mufflers

Used in: 1949-1960 mk1 Foreia 233L


C4 (1949-1960)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Twin two barrel carb
  • 5000rpm redline
  • Leaded 92
  • Tubular exhaust header
  • Two baffled mufflers

Used in: 1949-1960 mk1 Foreia 234C / 234D


Ce3-92 (1960-1965)

(for 92hp, no change in technology worth mentioning)
Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Triple single barrel eco carb
  • 5200rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1960-1965 Mk2 Foreia 233L

1 Like

154P15

Production years: 1955 through 1975
Shared specs:

  • Pushrod inline 4, cast iron block, cast iron head
  • Bore: 72mm
  • Stroke: 94.4mm
  • Displacement: 1537cc

Cars used in:

  • 1955-1965 Mesaia mk1
  • 1960-1974 Foreia mk2 (pre-facelift only, 152 only)
  • 1965-1975 Mesaia mk2

Ce2 (1955-1965)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 5000rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1955-1965 mk1 Mesaia 152L


Ce2U (1965-1975)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 5400rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1965-1975 mk2 Mesaia 152M / Gendarmerie special order


Ce2-65 (1960-1965)

(for 65hp, extra punch needed for the weight of the car)
Specs:

  • Internals: Cast crank, Heavy duty forged rods, Forged pistons
  • Compression ratio: 7.4:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 5400rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1960-1965 mk2 Foreia 152


DC2 (1960-1965)

Specs:

  • Internals: Cast crank, Heavy duty forged rods, Forged pistons
  • Compression ratio: 8.8:1
  • Naturally aspirated
  • Twin DCOE carb
  • 5800rpm redline
  • Leaded 92
  • Tubular exhaust header
  • Two reverse flow mufflers

Used in: 1960-1965 Mk1 Mesaia 154S

154P13

Production years: 1955 through 1975
Shared specs:

  • Pushrod inline 4, cast iron block, cast iron head
  • Bore: 72mm
  • Stroke: 80.2mm
  • Displacement: 1307cc

Cars used in:

  • 1955-1965 Mesaia mk1
  • 1965-1975 Mesaia mk2

Ce2 (1955-1965)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 5000rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1955-1965 mk1 Mesaia 132


Ce2U (1955-1965)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 5500rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1965-1975 mk2 Mesaia 132

123P8

Production years: 1955 through 1975
Shared specs:

  • Pushrod inline 3, cast iron block, cast iron head
  • Bore: 64.8mm
  • Stroke: 80.2mm
  • Displacement: 794cc

Cars used in:

  • 1955-1985 Plebia mk2

Ce (1955-1965)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Single barrel eco carb
  • 5100rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two baffled mufflers

Used in: 1955-1965 mk2 Plebia 81


CeU (1965-1975)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Single barrel eco carb
  • 5500rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1965-1975 mk2 Plebia 81

123P10

Production years: 1955 through 1975
Shared specs:

  • Pushrod inline 3, cast iron block, cast iron head
  • Bore: 72mm
  • Stroke: 81.8mm
  • Displacement: 1000cc

Cars used in:

  • 1955-1985 Plebia mk2

Ce (1955-1965)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Single barrel eco carb
  • 5200rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1955-1965 mk2 Plebia 101M/101L


CeU (1965-1975)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Single barrel eco carb
  • 5600rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1965-1975 mk2 Plebia 101M/101L

236P20

Production years: 1960 through 1965
Shared specs:

  • Pushrod inline 6, cast iron block, cast iron head
  • Bore: 72mm
  • Stroke: 81.8mm
  • Displacement: 1999cc

Cars used in:

  • 1960-1974 Foreia mk2

Ce3 (1960-1965)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.2:1
  • Naturally aspirated
  • Triple Single barrel eco carb
  • 5200rpm redline
  • Leaded 92
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1960-1965 mk2 Foreia 203M

133S10

Production years: 1965 through 19??
Shared specs:

  • Bore: 77.1mm
  • Stroke: 71.5mm
  • Displacement: 1000cc

Cars used in:

  • 1955-1985 Plebia mk2

C2U (1965-1975)

Specs:

  • Internals: Forged crank, Heavy duty forged rods, Forged pistons
  • Compression ratio: 7.6:1
  • Naturally aspirated
  • Two barrel carb
  • 6200rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in: 1965-1975 Plebia 102S

184S16

Production years: 1965 through 19??
Shared specs:

  • Direct acting SOHC Inline 4, cast iron block, cast iron head
  • Bore: 78.7mm
  • Stroke: 82.2mm
  • Displacement: 1599cc

Cars used in:

  • 1960-1974 Foreia Mk2
  • 1965-1975 Mesaia Mk2
  • 1974-19?? Foreia Mk3
  • 1975-19?? Mesaia Mk3

Ce2U (1965-1975)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 5900rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1965-1974 Mk2 Foreia 162
  • 1965-1975 Mk2 Mesaia 162L


Ce2UE (1974-19??)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 6300rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1974-19?? Mk3 Foreia 1.6 BL
  • 1975-19?? Mk3 Mesaia 1.6 GL


DCU (1965-1972)

Specs:

  • Internals: Forged crank, Heavy duty forged rods, Forged pistons
  • Compression ratio: 8.4:1
  • Naturally aspirated
  • Twin DCOE carb
  • 6700rpm redline
  • Unleaded 91
  • Tubular exhaust header
  • Two baffled mufflers

Used in:

  • 1965-1972 Mk2 Mesaia 164S


ME (1978-19??)

Specs:

  • Internals: cast crank, cast rods, hypereutectic cast pistons
  • Compression ratio: 8.3:1
  • Naturally aspirated
  • Mechanical fuel injection, single throttle body
  • 6900rpm redline
  • Unleaded 91
  • Tubular exhaust header
  • One straight through and one reverse flow muffler

Used in:

  • 1978-19?? Mk3 Mesaia GTI

ME-US (1978-19??)

Specs:

  • Internals: cast crank, cast rods, hypereutectic cast pistons
  • Compression ratio: 7.2:1
  • Naturally aspirated
  • Mechanical fuel injection, single throttle body
  • 6500rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • One straight through and one reverse flow muffler

Used in:

  • 1978-19?? Mk3 Mesaia 1.6 CLI US


Mpi (1982-19??)

Specs:

  • Internals: Cast crank, Cast rods, Forged pistons
  • Compression ratio: 8.1:1
  • Naturally aspirated
  • Multipoint EFI
  • 6300rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1982-19?? Mesaia 1.6 GLi

184S18

Production years: 1965 through 19??
Shared specs:

  • Direct acting SOHC Inline 4, cast iron block, cast iron head
  • Bore: 84.2mm
  • Stroke: 82.2mm
  • Displacement: 1831cc

Cars used in:

  • 1960-1974 Foreia Mk2
  • 1974-19?? Foreia Mk3
  • 1976-19?? Ochlosia Mk1

Ce2U (1965-1974)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 6.9:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 5900rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1965-1974 Mk2 Foreia 182M


Ce2UE (1974-1983)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 6300rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1974-1982 Mk3 Foreia 1.8 GL
    *1976-1983 Mk1 Ochlosia 1.8 Van


ME (1978-1982)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.5:1
  • Naturally aspirated
  • Mechanical fuel injection, single throttle body
  • 6400rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1978-19?? Mk3 Foreia 1.8 GL Injection


Mpi (1982-19??)

Specs:

  • Internals: Cast crank, Cast rods, Forged pistons
  • Compression ratio: 8.2:1
  • Naturally aspirated
  • Multipoint fuel injection, single throttle body
  • 6500rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1982-19?? Mk4 Foreia 1.8

236S21

Production years: 1965 through 1974
Shared specs:

  • Direct acting SOHC Inline 6, cast iron block, cast iron head
  • Bore: 73.6mm
  • Stroke: 82mm
  • Displacement: 2093cc

Cars used in:

  • 1960-1974 Foreia Mk2

Ce3U (1965-1974)

Specs:

  • Internals: Cast crank, Cast rods, Cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Triple single barrel eco carb
  • 6200rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1965-1974 Mk2 Foreia 213L

236S23

Production years: 1965 through 19??
Shared specs:

  • Direct acting SOHC Inline 6, cast iron block, cast iron head
  • Bore: 73.6mm
  • Stroke: 90.8mm
  • Displacement: 2318cc

Cars used in:

  • 1960-1974 Foreia Mk2
  • 1974-19?? Klinos Mk1
  • 1978-19?? Coupe / Tetra

DCU (1965-1972)

Specs:

  • Internals: Forged crank, Heavy duty forged rods, Forged pistons
  • Compression ratio: 7.8:1
  • Naturally aspirated
  • Twin DCOE carbs
  • 6200rpm redline
  • Unleaded 91
  • Tubular exhaust header
  • One reverse flow and one baffled mufflers

Used in:

  • 1965-1972 Mk2 Foreia 234S


Ce3-US (1972-1974)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Triple single barrel eco carb
  • 5700rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • One reverse flow muffler

Used in:

  • 1972-1974 Mk2 Foreia 233L (US export)


ME (1978-19??)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.6:1
  • Naturally aspirated
  • Mechanical fuel injection with single throttle body
  • 5900rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • One baffled and one reverse flow mufflers

Used in:

  • 1978-19?? Mk1 Klinos GLSi
  • 1978-19?? Mk1 Coupe CS


MTE (1978-19??)

Specs:

  • Internals: Cast crank, Heavy duty forged rods, Hypereutectic cast pistons
  • Compression ratio: 6.0:1
  • Single, journal bearing turbo @ 0.76bar
  • Mechanical fuel injection with single throttle body
  • 5900rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • One baffled and one reverse flow mufflers

Used in:

  • 1978-19?? Mk1 Klinos Excellence
  • 1978-19?? Mk1 Coupe Turbo


MT (1981-1984)

Specs:

  • Internals: Forged crank, Heavy duty forged rods, Forged pistons
  • Compression ratio: 6.0:1
  • Single, ball bearing turbo @ 1.03bar
  • Mechanical fuel injection with single throttle body
  • 6600rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • One straight through and one reverse flow mufflers

Used in:

  • 1981-1984 Coupe Tetra evo 1

MpiT (1982-1984)

Specs:

  • Internals: Forged crank, Heavy duty forged rods, Forged pistons
  • Compression ratio: 7.0:1
  • Single, ball bearing turbo @ 1.03bar
  • Multipoint EFI with single throttle body
  • 6700rpm redline
  • Unleaded 95
  • Short cast exhaust header
  • One straight through and one reverse flow mufflers

Used in:

  • 1982-1984 Coupe Tetra evo 2

1 Like

236S22

(destroked 236S23, necessary to fit hypereutectic cast pistons on 1974 tech and still get a decent redline)

Production years: 1974 through 19??
Shared specs:

  • Direct acting SOHC Inline 6, cast iron block, cast iron head
  • Bore: 73.6mm
  • Stroke: 84.9mm
  • Displacement: 2167cc

Cars used in:

  • 1974-19?? Klinos Mk1
  • 1976-19?? Ochlosia

Ce3UE (1974-19??)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Triple single barrel eco carbs
  • 6200rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1974-19?? Mk1 Klinos GLS
  • 1976-19?? Ochlosia Camper

123P9

Production years: 1975 through 1985
Shared specs:

  • Pushrod inline 3, cast iron block, cast iron head
  • Bore: 69mm
  • Stroke: 80.2mm
  • Displacement: 899cc

Cars used in:

  • 1955-1985 Mk2 Plebia

CeUE (1975-1985)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Single barrel eco carb
  • 5800rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1975-1985 Mk2 Plebia BL

133S11

Production years: 1975 through 19??
Shared specs:

  • Direct acting SOHC inline 3, cast iron block, cast iron head
  • Bore: 81mm
  • Stroke: 71.5mm
  • Displacement: 1105cc

Cars used in:

  • 1975-19?? Mk3 Mesaia
  • 1955-1985 Mk2 Plebia
  • 1985-19?? Mk1 Dima

CeUE (1975-1985)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.0:1
  • Naturally aspirated
  • Single barrel eco carb
  • 6400rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1975-1982 Mk3 Mesaia 1.1 BL
  • 1975-1985


Spi (1982-19??)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.3:1
  • Naturally aspirated
  • Single point EFI
  • 6400rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1982-19?? Mk3 Mesaia 1.1 BLi
  • 1985-19?? Mk1 Dima 1.1 CL

184S13

Production years: 1975 through 19??
Shared specs:

  • Direct acting SOHC inline 4, cast iron block, cast iron head
  • Bore: 75.8mm
  • Stroke: 72.1mm
  • Displacement: 1300cc

Cars used in:

  • 1975-19?? Mk3 Mesaia

Ce2UE (1975-1985)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.1:1
  • Naturally aspirated
  • Twin single barrel eco carb
  • 6200rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1975-19?? Mk3 Mesaia 1.3 CL


Mpi (1982-19??)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.9:1
  • Naturally aspirated
  • Multipoint fuel injection
  • 6200rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

  • 1982-19?? Mk3 Mesaia 1.3 CLi

133S13

Production years: 1978 through 1996
Shared specs:

  • Direct acting SOHC inline 3, cast iron block, cast iron head
  • Bore: 81mm
  • Stroke: 84.1mm
  • Displacement: 1300cc

Cars used in:

  • 1955-1985 Mk2 Plebia
  • 1975-19?? Mk3 Mesaia
  • 1985-19?? Mk1 Dima

Spi (1978-1985)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.4:1
  • Naturally aspirated
  • Throttle body fuel injection
  • 6300rpm redline
  • Unleaded 91
  • Tubular exhaust header
  • One straight through, one reverse flow mufflers

Used in:

  • 1978-1985 Mk2 Plebia IS

Spi-US (1978-19??)

Specs:

  • Internals: Cast crank, Cast rods, Hypereutectic cast pistons
  • Compression ratio: 7.4:1
  • Naturally aspirated
  • Throttle body fuel injection
  • 6300rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • One straight through, one reverse flow mufflers

Used in:

Mpi (1985-1991)

Specs:

  • Internals: Cast crank, Cast rods, Forged pistons
  • Compression ratio: 8.2:1
  • Naturally aspirated
  • Multipoint fuel injection
  • 6500rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Two reverse flow mufflers

Used in:

Mpi Euro 1 (1991-1996)

Specs:

  • Internals: Cast crank, Cast rods, low friction cast pistons
  • Compression ratio: 8.0:1
  • Naturally aspirated
  • Multipoint fuel injection
  • 6300rpm redline
  • Unleaded 91
  • Short cast exhaust header
  • Catalytic converter + Two reverse flow mufflers

Used in:

FAAL Senior Legal Compliance Management - Intellectual Property - internal communication to FAAL Communication Head of Department

Dear colleague,

In relation to your recent communication regarding the FAAL engines, the legal department wishes to notify you that a product cannot both be a non-registered trademark, indicated by ™, as well as a registrered trademark, indicated by ® .

I also wish to stress that this indication or registration is only valid in the US. Individual registrations should be filed in individual nations or regions, perhaps beginning with enregistrement de marque in France. A Community Trade Mark/EU Trade mark is available from at the latest 1994.

Kind regards,
Legal-IP

4 Likes